OpenSolaris_b135/cmd/terminfo/hazeltine.ti
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License"). You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
# All Rights Reserved
#ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.6 */
# # --------------------------------
#
# hazeltine: HAZELTINE
#
# Manufacturer: HAZELTINE
# Class: II
#
# Info:
# Since cuf1 is blank, when you want to erase something you
# are out of luck. You will have to do ^L's a lot to
# redraw the screen. h1000 is untested. It doesn't work in
# vi - (The code is there but it isn't debugged for this case.)
#
h1000|hazeltine 1000,
cub1=^H, home=^K, clear=^L, cuf1= ,
cols#80, lines#12, cr=^M, cud1=^J, ind=^J, bel=^G,
h1420|hazeltine 1420,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, am, lines#24, cols#80,
il1=\E^Z, dl1=\E^S, ed=\E^X, clear=\E\034, cuu1=\E^L, cuf1=^P,
el=\E^O, ht=^N, cup=\E^Q%p2%c%p1%' '%+%c, smso=\E\037, rmso=\E^Y,
h1500|hazeltine 1500,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=~^Z$<40>, hz, am,
cub1=^H, ed=~^X$<10>,
el=~^O, clear=~^\, cup=~^Q%p2%c%p1%c, cols#80, dl1=~^S$<40>,
cud1=~^K, lines#24, cuf1=^P, smso=~^_, rmso=~^Y, cuu1=~^L,
# Info:
# This is a Fluke special to work around the comm gear
# intercepting ^S
#
s1500|hazeltine 1500 thru comm system that see's ^S ,
cr=^M, ind=^J, cud1=^J, bel=^G,
il1=~^Z$<40>, am, cub1=^H, ed=~^X$<10>, el=~^O,
clear=~^\, cup=~^Q%p2%c%p1%c, cols#80,
cud1=~^K, hz, lines#24, cuf1=^P, cuu1=~^L,
# Info:
# h1510 assumed to be in escape mode. Else use h1510t.
#
h1510|hazeltine 1510 using escape escapes,
cr=^M, cud1=^J, ind=^J, bel=^G,
il1=\E^Z, am, cub1=^H, ed=\E^X, el=\E^O, clear=\E^\,
cup=\E^Q%p2%c%p1%c, cols#80, dl1=\E^S, cud1=\E^K,
lines#24, cuf1=^P, .rmso=\E^_, .smso=\E^Y, cuu1=\E^L,
h1510t|Hazeltine 1510 with tilde escapes,
am,
home=~^R,
khome=~^R,
cuu1=~^L,
kcuu1=~^L,
cud1=~^K,
kcud1=~^K,
cub1=\b,
bel=^G,
cbt=~,
clear=~ ,
cols#80,
cr=
,
cuf1=^P,
cup=~^Q%p2%c%p1%c,
dl1=~^S$<40>,
ed=~^X$<10>,
el=~^O,
hz,
il1=~^Z$<40>,
ind=^J,
kbs=,
kcbt=~,
kclr=~ ,
kcub1=\b,
kcuf1=^P,
kf0=~0\r,
kf1=~1\r,
kf2=~2\r,
kf3=~3\r,
kf4=~4\r,
kf5=~5\r,
kf6=~6\r,
kf7=~7\r,
kf8=~8\r,
kf9=~9\r,
ktbc=~.\r,
lines#24,
rmso=~^Y,
sc=~^E,
smso=~^_,
h1520|hazeltine 1520,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=~^Z, am, cub1=^H,
ed=~^X, el=~^O, clear=~\034, cup=~^Q%p2%c%p1%c$<1>, cols#80,
dl1=~^S, cud1=~^K, hz, lines#24, cuf1=^P,
rmso=~^Y, smso=~\037, cuu1=~^L, home=~^R,
# Info:
# The h1552 has tildes and backprimes and everything!
# Be sure the auto lf/cr switch is set to cr.
#
h1552|hazeltine 1552,
cols#80, it#8, lines#24,
bel=^G, clear=\EH\EJ, cr=\r, cub1=\b, cud1=\n,
cuf1=\EC, cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=\EA,
dl1=\EO, ed=\EJ, el=\EK, ht=\t, il1=\EE, ind=\n,
kbs=\b, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue, lf2=red,
lf3=green, ri=\EI,
h1552-rv|hazeltine 1552 reverse video,
cr=^M, cud1=^J, ind=^J, bel=^G,
smso=\ES, rmso=\ET, use=h1552,
# Info:
# h2000 won't work well because of a clash between upper case
# and ~'s.
#
h2000|hazeltine 2000,
cud1=^J, ind=^J, bel=^G,
il1=~^z$<6>, am, cub1=^H, clear=~^\$<6>, cup=~^q%p2%c%p1%c, cols#74,
dl1=~^s$<6>, home=~^r, lines#27, pad=\177,
# Info:
# Date: Fri Jul 23 10:27:53 1982
# I tested this termcap entry for the Hazeltine Esprit with vi. It
# seems to work ok. There is one problem though if one types a
# lot of garbage characters very fast vi seems not able to keep
# up and hangs while trying to insert. That's in insert mode
# while trying to insert in the middle of a line. It might be
# because the Esprit doesn't have insert char and delete char as
# a built in function. Vi has to delete to end of line and then
# redraw the rest of the line.
#
esprit|Hazeltine Esprit I,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\E^Z, am, cub1=^H,
cbt=\E^T, bw, ed=\E^W, el=\E^O, clear=\E\034, cup=\E^Q%p2%c%p1%c,
cols#80, dl1=\E^S, cud1=\E^K, home=\E^R, is2=\E\077,
kf0=^B\060\n, kf1=^B\061\n, kf2=^B\062\n, kf3=^B\063\n,
kf4=^B\064\n, kf5=^B\065\n, kf6=^B\066\n, kf7=^B\067\n,
kf8=^B\070\n, kf9=^B\071\n, kbs=^H, kcud1=\E^K, rmkx=\E\076,
khome=\E^R, kcub1=^H, kcuf1=^P, smkx=\E\074, kcuu1=\E^L, lf0=0,
lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
lines#24, cuf1=^P, rmso=\E^Y, smso=\E^_, cuu1=\E^L,