OpenSolaris_b135/cmd/terminfo/pc.ti
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
# All Rights Reserved
#
# Copyright 2007 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
#pragma ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.15 */
# # PC - Personal Computers and Workstations emulating terminals.
#
# Manufacturer: PERSONAL COMPUTER TERMINALS
# Class: III
#
# Info:
# This category is strange. The typical personal computer offers
# a program to emulate a "terminal" without documenting any
# escape sequences.
#
# I don't have any direct personal experience with these, but
# my impression is that the terminal emulator emulates an
# ultra-dumb terminal, with the cursor cemented to the bottom
# line, and no escape sequences.
#
# Many of the entries below were found in random places with
# no indication of who they came from or how. In many cases, I
# believe what has happened is that someone wrote their own
# terminal emulator program, which understood some control
# characters or escape sequences, and made their own entries.
#
# GENERIC PERSONAL COMPUTER
#
pc|any personal computer emulating a terminal,
am,
cols#40,
bel=^G, cr=\r, cud1=\n, ind=\n,
apple-soroc|apple emulating soroc 120,
am,
cols#80, lines#24,
bel=^G, clear=\E*$<300>, cr=\r, cub1=\b, cud1=\n,
cuf1=\f, cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K,
ed=\EY, el=\ET, home=^^, ind=\n, kcub1=\b, kcud1=\n,
kcuf1=\f, kcuu1=^K,
# Info:
# For those of you with either Programma's Pie or Hayden's Pie,
# I'm including a patch for DOS which allows them to function
# interactively as a terminal, with data transfer.
#
# The following termcap entry works only with an Apple ][+ that is
# equipped with a Videx 80 collumn card in slot 3. A special
# routine must be installed at the apple end to enable scroll
# down, here indicated with a ^U. The Videx card must have
# inverse char set.
#
apple|apple-v80|Apple][+ w/Videx80 & custom scroll down,
cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, cub1=^H$<10>,
smacs=^z2, rmacs=^z3, cup=\015\036%r%p1%' '%+%c%p2%' '%+%c$<6>,
el=\035$<6>, home=\031$<50>, smso=^z3, rmso=^z2,
cuf1=\034, cud1=\012, cuu1=\037, clear=\014$<40*>,
xenl, am, ri=\020, ed=\013$<20*>,
# Info:
# --------------------------------------------------------------
#
# Pieterm is written using Lisa 2.5. If any of the opcodes used
# are confusing, refer to hex values in the left most column.
#
#
# 1 TTL "PIETERM 1.0
# 2 NLS
# 3 ;
# 4 ; PIETERM: A program which patches 48k DOS 3.3 to allow
# 5 ; Programma Pie, and Hayden Pie to function in
# 6 ; a terminal mode.
# 7 ;
# 8 ; ASSUMES: Videx 80 collumn Videoterm in slot 3.
# 9 ; 1200 baud Serial Card in slot 2.
# 10 ; DOS 3.3 unmodified at $9D00 (master or slave)
# 11 ;
# 12 ; TO USE: Either from the Command level of Pie, or in a
# 13 ; "HELLO" program, "BRUN PIETERM,A$6000".
# 14 ; To enter terminal mode, from the Command level
# 15 ; of Pie, enter "TERM" or "TERM ".
# 16 ; "TERM" Sends a carriage return before entering terminal
# 17 ; mode. Best for reentering csh.
# 18 ; "TERM " Sends a ^D character before entering
# 19 ; terminal mode. For example, "TERM " should be
# 20 ; entered if returning to a cat>filename.
# 21 ;
# 22 ; RETURN: To return to the command level of Pie from the
# 23 ; terminal mode, enter "^@". With an upper case
# 24 ; locked keyboard, that is control-shift-P. With
# 25 ; and Enhanser II lower case keyboard, that is ^0.
# 26 ;
# 27 ; SENDING: From the Command level of Pie, indicated by
# 28 ; "Command:" (csh indicated by %), enter:
# 29 ;
# 30 ; Command:TERM
# 31 ; % stty -echo;cat>filename;stty echo
# 32 ; % ^@
# 33 ; Command:>#2
# 34 ; Command:TERM
# 35 ; ^__space
# 36 ;
# 37 ; RECEIVING: % wc filename
# 38 ; 46 123 4567 filename
# 39 ; % sleep 20;cat filename
# 40 ; ^@
# 41 ; Command:(1,46)<#2
# 42 ;
# 43 ; BUGS: Extra linefeeds are sent both ways. A filter program
# 44 ; at the UN*X end is required to strip every other \n.
# 45 ; Arg "^J" Arg "" ^W^X will globally illiminate them
# 46 ; within Pie.
# 47 ;
# 48 ; Since the Patch program overwrites the INIT portion
# 49 ; of DOS, it must be brun every boot. A zap utility
# 50 ; may be used to modify DOS directly on the disk.
# 51 ;
# 52 ; Pie gives no indication of what is going on. This
# 53 ; takes a little getting used to. It is possible to
# 54 ; get so involved with what you are doing in Pie, that
# 55 ; you forget you are logged on.
# 56 ;
# 57 ; Because of the limitation of Pie's buffer, large
# 58 ; file need to be transfered in chunks.
# 59 ;
# 60 ; --------------------------------
# 61 ;
# 62 ;
# 0800 63 ;
# 06F8 64 NO EQU $6F8 ; address specific to videx
# 0638 65 START EQU NO-$C0 ; card in slot 3. See
# C080 66 DEV0 EQU $C080 ; reference manual.
# C081 67 DEV1 EQU $C081
# 03B8 68 BASEL EQU $478-$C0
# CA2E 69 BASCLC1 EQU $CA2E
# 0438 70 BASEH EQU $4F8-$C0
# 0800 71 ;
# C0AE 72 STATUS EQU $C0AE ; Serial card specific to
# C0AF 73 DATAPORT EQU $C0AF ; slot 2. Adjust as needed.
# 0800 74 ;
# FDED 75 COUT EQU $FDED ; Stdout
# 0800 76 ;
# A884 77 PUTNAME EQU $A884 ; DOS patch addresses
# A909 78 PUTTOKEN EQU $A909
# 9D1E 79 PUTADR EQU $9D1E
# AE8E 80 PUTPATCH EQU $AE8E
# 0800 81 ;
# 6000 82 ORG $6000
# 6000 83 OBJ $800
# 6000 84 ;
# 6000 4C 0B 60 85 JMP MAIN
# 6003 86 ;
# 6003 54 45 52 87 NAME DCI 'TERM' ; hi-bit off except last
# 6006 CD
# 6007 40 70 88 TOKEN HEX 4070 ; need-filename optional
# 6009 8D AE 89 ADRESS ADR PUTPATCH-1
# 600B 90 ;
# 600B 91 MAIN:
# 600B A2 04 92 LDX 4
# 600D BD 02 60 93 ^1 LDA NAME-1,X
# 6010 9D 83 A8 94 STA PUTNAME-1,X
# 6013 CA 95 DEX
# 6014 D0 F7 96 BNE <1
# 6016 E8 97 INX
# 6017 BD 07 60 98 ^2 LDA TOKEN,X
# 601A 9D 09 A9 99 STA PUTTOKEN,X
# 601D BD 09 60 100 LDA ADRESS,X
# 6020 9D 1E 9D 101 STA PUTADR,X
# 6023 CA 102 DEX
# 6024 10 F1 103 BPL <2
# 6026 A2 73 104 LDX #ENDPATCH-PATCH+1
# 6028 BD 32 60 105 ^3 LDA PATCH,X
# 602B 9D 8E AE 106 STA PUTPATCH,X
# 602E CA 107 DEX
# 602F 10 F7 108 BPL <3
# 6031 60 109 RTS
# 6032 110 ;
# 6032 111 PATCH:
# 6032 112 PHS PUTPATCH
# AE8E 113 ;
# AE8E A2 8D 114 LDX #$8D
# AE90 AD 04 02 115 LDA INBUFF+4
# AE93 C9 A0 116 CMP #" "
# AE95 D0 02 117 BNE >0
# AE97 A2 84 118 LDX #$84
# AE99 8A 119 ^0 TXA
# AE9A 4C BD AE 120 JMP SENDIT
# AE9D AD AE C0 121 RECEIVE LDA STATUS
# AEA0 29 01 122 AND #$01
# AEA2 F0 0C 123 BEQ SEND
# AEA4 AD AF C0 124 LDA DATAPORT
# AEA7 29 7F 125 AND #$7F
# AEA9 C9 10 126 CMP #$10
# AEAB F0 1F 127 BEQ SCROLLD
# AEAD 20 ED FD 128 PRINTIT JSR COUT
# AEB0 AD 00 C0 129 SEND LDA $C000
# AEB3 10 E8 130 BPL RECEIVE
# AEB5 8D 10 C0 131 STA $C010
# AEB8 29 7F 132 AND #$7F
# AEBA D0 01 133 BNE SENDIT
# AEBC 60 134 RTS
# AEBD 48 135 SENDIT PHA
# AEBE AD AE C0 136 S0 LDA STATUS
# AEC1 29 02 137 AND #$02
# AEC3 F0 F9 138 BEQ S0
# AEC5 68 139 PLA
# AEC6 8D AF C0 140 STA DATAPORT
# AEC9 4C 9D AE 141 JMP RECEIVE
# AECC 38 142 SCROLLD SEC
# AECD A2 C3 143 LDX #$C3 ; for slot 3
# AECF AC F8 06 144 LDY NO
# AED2 BD 38 06 145 LDA START,X
# AED5 E9 05 146 SBC #$05
# AED7 29 7F 147 AND #$7F
# AED9 9D 38 06 148 STA START,X
# AEDC 20 2E CA 149 JSR BASCLC1
# AEDF A9 0D 150 LDA #$0D
# AEE1 99 80 C0 151 STA DEV0,Y
# AEE4 BD B8 03 152 LDA BASEL,X
# AEE7 99 81 C0 153 STA DEV1,Y
# AEEA A9 0C 154 LDA #$0C
# AEEC 99 80 C0 155 STA DEV0,Y
# AEEF BD 38 04 156 LDA BASEH,X
# AEF2 99 81 C0 157 STA DEV1,Y
# AEF5 A9 19 158 LDA #$19 ; home cursor
# AEF7 20 ED FD 159 JSR COUT
# AEFA A9 1D 160 LDA #$1D ; ceol
# AEFC 20 ED FD 161 JSR COUT
# AEFF 4C 9D AE 162 JMP RECEIVE
# AF02 163 ;
# AF02 164 DPH
# 60A6 165 ORG $6000+*-$800
# 60A6 166 OBJ *
# 60A6 167 ;
# 60A6 168 ENDPATCH:
# 60A6 169 END
# ATT
#
# Info:
# The official PC terminal emulator program of the AT&T Product
# Centers.
#
# Note - insert mode commented out - doesn't seem to work on
# AT&T PC.
#
simterm|attpc running simterm,
am,
cols#80, lines#24,
bel=^G, clear=\EH\EJ, cr=\r, cub1=\b, cud1=\EB,
cuf1=\EC, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=\EA,
dch1=\ER, dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL,
ind=\n, rmcup=\EVE, .rmir=\EE, .rmso=\E&d@, smcup=\EVS,
smir=\EQ, smso=\E&dB,
# Info:
#
vic20|vic|vic Personal Computer,
cr=^M, cud1=^J, ind=^J, bel=^G, am, clear=^K^L, home=^L,
lines#20, cuu1=^^, cuf1=^\, cols#22,
# Info:
# (Dan Ingold)
#
# Following is a TERMCAP entry for the Datapoint UNITRM18
# asynchronous terminal emulation program. It has only been
# tested out at 1200 baud, however, so I don't know if the
# delays are correct.
#
# [what is control "="? keys send different codes from functions? - mrh]
#
unitrm18|datapoint 'UNITRM18' terminal emulator,
cr=^M, ind=^J, cud1=^J, bel=^G, am, cub1=^y,
ed=^?, el=^>, clear=^=^?$<12.5>, cols#80, cud1=^k, home=^=,
kcuu1=^x, kcud1=^r, kcub1=^t, kcuf1=^v, lines#24, cuf1=^x, cuu1=^z,
# Info:
# FLORIDA COMPUTER GRAPHICS
# Florida Computer Graphics Beacon System, using terminal emulator
# program "host.com", as provided by FCG. Entry provided by
# David Bryant (cbosg!djb) 1/7/83.
# This description is for an early release of the "host" program.
# Known bug: ed clears the whole screen, so it's commented out.
#
beacon|FCG Beacon System,
cr=^M, cud1=^J, ind=^J, cols#80, lines#32, clear=\EZ$<10>,
cub1=^H, cup=\E=%p1%' '%+%c%p2%' '%+%c$<20>, cuf1=\EV, cuu1=\EU, el=\ET,
.ed=\EY, dch1=\EW, ich1=\EQ, dl1=\ER, il1=\EE,
smcup=\ESTART^M\E2\0540^M\E12^M\EEND^M$<10>,
bel=\ESTART^M\E37^M\EEND^M$<1>, home=\EH$<10>,
am, da, db,
rev=\ESTART^M\E59\0541^M\EEND^M,
smso=\ESTART^M\E70\0546^M\EEND^M$<20>,
rmso=\ESTART^M\E70\0540^M\EEND^M$<20>,
smul=\ESTART^M\E60\0541^M\EEND^M,
rmul=\ESTART^M\E60\0540^M\EEND^M,
blink=\ESTART^M\E61\0541^M\EEND^M,
sgr0=\ESTART^M\E78^M\E70\0540^M\EEND^M$<20>,
# Info:
# This doesn't work because the cursor position isn't saved
# with the window.
#
beacon-s|FCG Beacon System with status line,
lines#31, eslok, hs,
tsl=\ESTART^M\E45\0541^M\E41\054%p1%d\0541^M\EEND^M$<10>,
fsl=\ESTART^M\E45\0540^M\EEND^M$<10>,
is2=\ESTART^M\E45\0540^M\E65\05431^M\E66\05445^M\E45\0541^M\E65\0541^M\E66\0541^M\E45\0540^M\EEND^M$<30>,
use=beacon,
# Info:
# Here is the xtalk termcap. I mostly use the terminfo (curses)
# version myself since I am working at BTL where they have a
# certain bias. I am sending the terminfo version too, so that
# you can compare them if there are any undiscovered glitches
# in the termcap version due to insufficient testing.
#
# First the termcap version --
#
# d0|vt100|vt100-am|vt100|dec vt100:\
# :cr=^M:do=^J:nl=^J:bl=^G:co#80:li#24:cl=50\E[;H\E[2J:\
# :le=^H:bs:am:cm=5\E[i2252;787036H:nd=2\E[C:up=2\E[A:\
# :ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\
# :md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:is=\E[1;24r\E[24;1H:\
# :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
# :rf=/usr/share/lib/tabset/vt100:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:kb=^H:\
# :ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:ta=^I:pt:sr=5\EM:vt#3:xn:\
# :sc=\E7:rc=\E8:cs=\E[i2252;787036r:
# d1|xtalk|IBM PC with xtalk:\
# :sc@:rc@:cs@:am@:xn@:al=99\E[L:dl=99\E[M:tc=vt100-am:
#
# The problem is in the "xtalk" entry. The "am" auto-margin
# flag should not be turned off as shown above. The following
# is the corrected "xtalk" entry.
#
# d1|xtalk|IBM PC with xtalk:\
# :sc@:rc@:cs@:xn@:al=99\E[L:dl=99\E[M:tc=vt100-am:
#
# This is the shell script that I execute from my profile when I
# login from xtalk --
#
# # set auto margins
# echo '\033[?7h\c'
# #set up tab stops
# stty -tabs
# echo '\033[3g'
# for i in 1 2 3 4 5 6 7 8 9
# do
# echo ' \033H\c'
# done
# stty tabs
# echo
#
#
# Now the terminfo version (This is the input to the 'tic'
# compiler) --
#
# Vanilla vt100 definitions.
# vt100|vt100-am|dec vt100,
# cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, it#8,
# clear=\E[H\E[2J$<50>, cub1=^H, am, cup=\E[ip12252;p2787036H$<5>,
# cuf1=\E[C$<2>, cuu1=\E[A$<2>, el=\E[K$<3>, ed=\E[J$<50>,
# cud=\E[p12252B, cuu=\E[p1787036A, cub=\E[p1787088D, cuf=\E[p1787036C,
# smso=\E[7m$<2>, rmso=\E[m$<2>, smul=\E[4m$<2>, rmul=\E[m$<2>,
# bold=\E[1m$<2>, rev=\E[7m$<2>, blink=\E[5m$<2>, sgr0=\E[m$<2>,
# sgr=\E[?p1t;7;?p2t;4;?p3t;7;?p4t;5;?p6t;1;m,
# rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smkx=\E[?1h\E=, rmkx=\E[?1l\E>,
# tbc=\E[3g, hts=\EH, home=\E[H,
# kcuu1=\EOA, kcud1=\EOB, kcuf1=\EOC, kcub1=\EOD, kbs=^H,
# kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ht=^I, ri=\EM$<5>,
# vt#3, xenl, xon, sc=\E7, rc=\E8, csr=\E[ip12252;p2787036r,
#
#
# ibm xtalk terminal simulator -- similar to but dumber than
# vanilla vt100
# Enjoy!
# Rick Thomas
# ihnp4!btlunix!rbt
# (201)-522-6062
#
# PS -- I just got word that there is a new revision of xtalk
# (3.5 I think they said) that is supposed to fix the vt100
# emulation problems.
#
xtalk|IBM PC with xtalk communication program,
am, mir, msgr, xon,
cols#80, it#8, lines#24, vt#3, xmc#1,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD,
cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
cuu=\E[%p1%dA, cuu1=\E[A$<2>, dl1=\E[M$<99>,
ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH,
il1=\E[L$<99>, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr,
kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, ri=\EM$<5>,
rmacs=^O, rmkx=\E[?1l\E>, rmso=\E[m\s,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smacs=^N,
smkx=\E[?1h\E=, smso=\E[7m\s, tbc=\E[3g,
#
# Info:
# \EI gets you out of inverse video mode.
#
# Info:
# IBM
# Thu May 5 19:35:27 1983
#
ibmpc|ibm-pc|ibm5051|5051|IBM Personal Computer,
cud1=^J, ind=^J$<10>, bel=^G, smir=\200R, am, cub1=^],
kcud1=^_, clear=^L^K, cr=^M^^, home=^K, lines#24, cuu1=^^,
cuf1=^\, cols#80,
# Info:
# According to the Coherent 2.3 manual, the PC console is similar
# to a z19. The differences seem to be (1) 25 lines, (2) no status
# line, (3) standout is broken, (4) ins/del line is broken, (5)
# has blinking and bold.
#
pc-coherent|pcz19|coherent|IBM PC console running Coherent,
cr=^M, cud1=^J, ind=^J, bel=^G, .il1=\EL$<1*>, am, cub1=^H,
ed=\EJ, el=\EK, clear=\EE, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80,
dch1=\EN, .dl1=\EM$<1*>, cud1=\EB, rmir=\EO, home=\EH, smir=\E@,
lines#25, mir, cuf1=\EC, ht=^I, it#8,
ri=\EI, rmso=\Eq, smso=\Ep, cuu1=\EA,
kbs=^h, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\EH,
# Info:
# According to the Venix 1.1 manual, the PC console is similar
# to a DEC vt52. Differences seem to be (1) arrow keys send
# different strings, (2) enhanced standout, (3) added
# insert/delete line.
#
# Note in particular that it doesn't have automatic margins (ick).
# There are other keys (f1-f10, pgup, pgdn, backtab, insch,delch)
# which I don't have time to add now.
#
pc-venix|venix|IBM PC console running Venix,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK,
clear=\EH\EJ, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80, lines#25,
cuf1=\EC, ht=^I, it#8, ri=\EI, cuu1=\EA,
kcuu1=\EH, kcud1=\EP, kcuf1=\EM, kcub1=\EK, kbs=^H,
il1=\EL, dl1=\EM, khome=\EG,
ibm|ibm3101|3101|i3101|IBM 3101-10,
am,
cols#80, lines#24,
bel=^G, clear=\EK, cr=\r, cub1=\b, cud1=\n, cuf1=\EC,
cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=\EA, ed=\EJ,
el=\EI, home=\EH, ht=\t, hts=\E0, tbc=\EH,
ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
ibm-system1|system1|ibm system/1 computer,
ind=^J, bel=^G, xt, am, cub1=^H,
cup=^E%p1%' '%+%c%p2%' '%+%c, clear=^Z,
cols#80, home=^K, lines#24, cuf1=^\, cuu1=^^,
megatek|Pegasus Work Station Terminal Emulator,
cols#83, lines#60, os, am,
# Info:
# sol and Microkit are for Corey - 6/11/82 - NS
#
microkit|mkt|microkit terminal computer,
cr=^M, ind=^J, cud1=^J, bel=^G,
il1=\El, am, cub1=^H, ed=\Ej, el=\Ek, clear=\Ee,
cup=\Ey%p1%' '%+%c%p2%' '%+%c, cols#40, dch1=\En, dl1=\Em,
rmir=\Eo, home=\Eh, smir=\E@, lines#23, mir,
cuf1=\Ec, cuu1=\Ea, ht=^I, cvvis=^N^Lzv, cnorm=\Ex,
kcuu1=\Eu, kcud1=\Ed, kcub1=\El, kcuf1=\Er, khome=\Eh, xenl,
# Info:
# OSBORNE
# Thu Jul 7 03:55:16 1983
#
# As an aside, be careful; it may sound like an anomaly on the
# Osborne, but with the 80-column upgrade, it's too easy to
# enter lines >80 columns!
#
# I've already had several comments...
# The Osborne-1 with the 80-col option is capable of being
# 52,80, or 104 characters wide; default to 80 for compatibility
# with most systems.
#
# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
#
ozzie|osborne|osborne1|osborne 1,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, cub1=^H, el=\ET,
cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=^Z, cols#104, dch1=\EW, dl1=\ER,
kcuu1=^K, kcud1=^J, kcub1=^H, kcuf1=^L, cud1=^J, cuf1=^L,
ich1=\EQ, lines#24, cuu1=^K, msgr, smso=\E), rmso=\E(,
ul, smul=\El, rmul=\Em, xt,
# Info:
# SOL
# I don't know which, if either, of these sol's to believe.
# ^S is an arrow key!
#
sol|sol1|,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, cup=\E^1%p1%c\E^2%p2%c,
clear=^K, home=^N, cols#64, lines#16, cuf1=^S, cuu1=^W,
kcub1=^A, kcuf1=^S, kcuu1=^W, kcud1=^Z,
# Info:
# sol and Microkit are for Corey - 6/11/82 - NS
#
sol2|sol terminal computer,
cr=^M, ind=^J$<20>, cud1=^J, bel=^G,
il1=20\EL, am, cub1=^H, ed=20\EJ, el=\EK, clear=20\EE,
cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#64, dch1=\EN, dl1=20\EM,
rmir=\EO, home=\EH, smir=\E@, lines#16, mir, cuf1=\EC,
cuu1=\EA, ht=^I, cvvis=^N^Lv, cnorm=\EX,
kcuu1=\EU, kcud1=\ED, kcub1=\EL, kcuf1=\ER, khome=\EH, xenl,
# Info:
# SUN
# smcup/rmcup control # lines scrolled on linefeed. The sun 2
# seems to handle this well with it set to 1, so both force this.
# rmcup could use 0 or 3 just as well, I suppose.
#
sun|sun1|sun2|Sun Microsystems Inc. workstation,
cr=^M, cud1=^J, ind=^J, bel=^G, am, km, cub1=^H, clear=^L,
lines#34, cols#80, cup=\E[%i%p1%d;%p2%dH, cuf1=\E[C, cuu1=\E[A,
el=\E[K, ed=\E[J, il=\E[%p1%dL, dl=\E[%p1%dM, ich=\E[%p1%d@,
dch=\E[%p1%dP, kcub1=\E[D, kcud1=\E[B, kcuu1=\E[A, kcuf1=\E[C,
kf1=\E[224z, kf2=\E[225z, kf3=\E[226z, kf4=\E[227z,
kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
kf9=\E[232z, ht=^I, il1=\E[L, dl1=\E[M, rs2=\E[s,
smso=\E[7m, rmso=\E[m, smul=\E[4m, rmul=\E[m, bold=\E[1m,
rev=\E[7m, sgr0=\E[m,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
msgr, ich1=\E[@, dch1=\E[P, home=\E[H,
sun-s|Sun Microsystems Workstation window with status line,
hs, tsl=\E]l, fsl=\E\\, dsl=\E]l\E\\, use=sun,
sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
hs, tsl=\E]l, fsl=\E\\, dsl=\E]l\E\\, use=sun-e,
sun-48|Sun 48-line window,
lines#48, cols#80, use=sun,
sun-34|Sun 34-line window,
lines#34, cols#80, use=sun,
sun-24|Sun 24-line window,
lines#24, cols#80, use=sun,
sun-17|Sun 17-line window,
lines#17, cols#80, use=sun,
sun-12|Sun 12-line window,
lines#12, cols#80, use=sun,
sun-1|Sun 1-line window for sysline,
lines#1, cols#80, eslok, hs, tsl=\r, fsl=\E[K, dsl=^L, use=sun,
# emacs runs faster without insert character
sun-nic|sune|sun-e|Sun Microsystems Workstation console without insert character,
ich1@, use=sun,
sun-cmd|Sun Microsystems Workstation console with scrollable history,
rmcup=\E[>4h, smcup=\E[>4l, use=sun,
sun-na|Sun Microsystems Workstation console with no arrow keys,
kcuu1@, kcud1@, kcub1@, kcuf1@, use=sun,
sun-color|Sun Workstation console with color text support,
colors#8, ncv#3, pairs#64,
op=\E[0m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4
%e%p1%{3}%=%t6
%e%p1%{4}%=%t1
%e%p1%{6}%=%t3
%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4
%e%p1%{3}%=%t6
%e%p1%{4}%=%t1
%e%p1%{6}%=%t3
%e%p1%d%;m,
use=sun,
# Info:
# X
# Latest and greatest "xterm" entry from X11R5
#
xterm|vs100|xterm terminal emulator,
ind=^J, cols#80, lines#65,
clear=\E[H\E[2J, cub1=^H, am, cup=\E[%i%p1%d;%p2%dH,
cuf1=\E[C, cuu1=\E[A, el=\E[K, ed=\E[J,
cud=\E[%p1%dB, cuu=\E[%p1%dA, cub=\E[%p1%dD,
cuf=\E[%p1%dC, km,
smso=\E[7m, rmso=\E[m, smul=\E[4m, rmul=\E[m,
bold=\E[1m, rev=\E[7m, blink=\E[5m, sgr0=\E[m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, rs2=@,
kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kf0=\E[21~,
ht=^I, ri=\EM, vt@, xon@, csr=\E[%i%p1%d;%p2%dr,
il=\E[%p1%dL, dl=\E[%p1%dM, il1=\E[L, dl1=\E[M,
ich=\E[%p1%d@, dch=\E[%p1%dP, ich1=\E[@, dch1=\E[P,
rmcup=\E[2J\E[?47l\E8, smcup=\E7\E[?47h,
use=vt100-am,
xterms|vs100s|xterm terminal emulator (small screen 24x80),
cols#80, lines#24,
use=xterm,
xpcterm|X PC-compatible terminal,
am, xon, cols#80, lines#25, colors#8, pairs#64, ncv#3,
cbt=^], bel=^G, cr=^M, clear=\e[2J\e[H, el=\e[K, ed=\e[J,
cup=\e[%i%p1%d;%p2%dH, cud1=\e[B, home=\e[H, cub1=\e[D, cuf1=\e[C,
cuu1=\e[A, dch1=\e[P, dl1=\e[M, smacs=\e[12m, blink=\e[5m,
bold=\e[1m, invis=\e[8m, rev=\e[7m, smso=\e[7m, smul=\e[4m,
rmacs=\e[10m, sgr0=\e[0;10m, rmso=\e[m, rmul=\e[m, is2=\e[0;10;39m,
ich1=\e[@, il1=\e[L, kbs=^H, kdch1=\177, kcud1=\e[B,
kf1=\eOP, kf2=\eOQ, kf3=\eOR, kf4=\eOS, kf5=\eOT,
kf6=\eOU, kf7=\eOV, kf8=\eOW, kf9=\eOX, kf10=\eOY,
khome=\e[H, kich1=\e[@, kcub1=\e[D, knp=\e[U, kpp=\e[V,
kcuf1=\e[C, kcuu1=\e[A, dch=\e[%p1%dP, dl=\e[%p1%dM,
cud=\e[%p1%dB, ich=\e[%p1%d@, indn=\e[%p1%dS, il=\e[%p1%dL,
cub=\e[%p1%dD, cuf=\e[%p1%dC, rin=\e[%p1%dT, cuu=\e[%p1%dA,
ind=\e[S, ri=\e[T,
sgr=\e[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
ht=^I,
acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
kcbt=^], kend=\e[Y, kf11=\eOZ, kf12=\eOA, op=\e[0m,
setf=\e[%?%p1%{0}%=%t30m%e%p1%{1}%=%t34m%e%p1%{2}%=%t32m%e%p1%{3}%=%t36m%e%p1%{4}%=%t31m%e%p1%{5}%=%t35m%e%p1%{6}%=%t33m%e%p1%{6}%=%t33m%e%p1%{7}%=%t37m%;,
setb=\e[%?%p1%{0}%=%t40m%e%p1%{1}%=%t44m%e%p1%{2}%=%t42m%e%p1%{3}%=%t46m%e%p1%{4}%=%t41m%e%p1%{5}%=%t45m%e%p1%{6}%=%t43m%e%p1%{7}%=%t47m%;,
xpcterms|X PC-compatible terminal (small) (X Window System),
lines#25, use=xpcterm,
terak|Terak emulating Datamedia 1520,
am, xenl,
cols#80, lines#24,
bel=^G, clear=\f, cr=\r, cub1=\b, cud1=\n, cuf1=^\,
cup=^^%p2%'\s'%+%c%p1%'\s'%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ht=\t, ind=\n, kcub1=\b, kcud1=\n, kcuf1=^\,
kcuu1=^_, khome=^Y,
trs80|trs-80|trs80-1|Radio Shack TRS-80 model I,
cr=^M, cud1=^J, ind=^J, bel=^G,
am, cub1=^H, cols#64, lines#16,
# Info:
#
trs16|trs80-16|trs-80 model 16 console,
cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL, am, cub1=^H, ed=\EJ,
el=\EK, clear=^L, cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA,
cols#80, dch1=\EQ, dl1=\EM,
cud1=\EB, ich1=\EP, home=\EH, kbs=^H, kcud1=\EB,
kcub1=\ED, kcuf1=\EC, kcuu1=\EA, kf0=^A, kf1=^B,
lines#24, cuf1=\EC, ht=^I, rmso=\ER@, xmc#0, smso=\ERD,
kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
# Info:
# Radio Shack model 100 running standard TELCOM Rom program
# hacking by <and flames to> Yerazuws@RPI, Bownesrm@RPI 1/8/84
# tested at 300 baud (foneline), remember to set the 100's RS-232
# to ignore parity (eg. config to 37I1N) if you want to
# run Emacs (which this termcap description will, quite nicely!)
#
# From: jgc@sunrise.UUCP Mon, 11-Jul-83 17:33:49 EDT
# esc A - cursor up
# esc B - cursor down
# esc C - cursor right
# esc D - cursor left
# esc E - clear screen and home cursor
# esc H - home cursor
# esc J - erase to end of screen
# esc K - erase to end of line
# esc L - insert line
# esc M - delete line
# esc P - turn on cursor
# esc Q - turn off cursor
# esc T - sets system line (?)
# esc U - resets system line (?)
# esc V - turn off LCD (?)
# esc W - turn on LCD (?)
# esc Y row column - cursor motion (:cm=\EY%+ %+ :)
# esc j - clear screen, don't move cursor
# esc l - erase line, don't move cursor
# esc p - begin reverse video
# esc q - end reverse video
# esc del - change char under cursor to space
#
trs80-100|trs100|trs-100|MZ|m-100|m100| Radio Shack Model 100,
cr=^M, cud1=^J, ind=^J, bel=^G, ed=\EJ, el=\EK, cub1=^H, am,
dl1=\EM$<5>, il1=\EL$<7>, cuu1=\EA, cuf1=\EC,
cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c,
lines#8, cols#40, smso=\Ep, rmso=\Eq,
kcuu1=^^, kcud1=^_, kcub1=^], kcuf1=^\, kbs=^H,
home=\EH, clear=\EE, civis=\EQ, cnorm=\EP,
trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
am, msgr, cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, dl1=^K, ed=^B, el=^A,
home=^F, ht=^I, il1=^D, ind=^_, kbs=^H, kcub1=^\,
kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, smso=^N,
# XEROX
x820|820|820-2|Xerox 820,
cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
cup=\E=%p1%' '%+%c%p2%' '%+%c,
clear=1^Z, ed=^Q, el=^X, cols#80, home=^^, lines#24,
cuf1=^L, cuu1=^K,
# COLOR EMULATORS
gs6300|emots|AT&T PC6300 with EMOTS Terminal Emulator,
# background color erase
am, msgr, xon, bce,
cols#80, it#8, lines#24, colors#8, pairs#64,
acsc=\,\,..--++``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
cr=\r, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, .el1=\E[1K,
home=\E[H, ht=\t, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E[0m, kbs=\b,
kcbt=^R\t, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s,
kf8=\E[21s, khome=\E[H, mc4=\E[4i, mc5=\E[5i,
rev=\E[7m, ri=\E[L, rmacs=\E[10m, rmln=\E|, rs1=\Ec,
sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
# color information. blue foreground is simulated with cyan
op=\E[?;m,
setf=\E[?%?%p1%{0}%=%t0
%e%p1%{1}%=%t2
%e%p1%{1}%-%d%;m,
setb=\E[?;%p1%dm,
pc52|dec vt52 for PC,
# background color erase
am, msgr, bce,
cols#80, it#8, lines#25,
# bold means: white on black bold, so it not allowed with colors
# rev meand: black on white, also not allowed
# smso and dim are simulated with colors, ditto
# smul is allowed, even though it always means white foreground:
# it is too important.
colors#8, pairs#64, ncv#53,
bel=^G, blink=\Eo, bold=\Ebo\Ec0, clear=\EH\EJ, cr=\r,
cub1=\b, cud1=\n, cuf1=\EC,
cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=\EA,
dim=\Eb3\Ec0, dl1=\EM, ed=\EJ, el=\EK, ht=\t, il1=\EL,
ind=\n, kbs=\b, kcub1=\EL, kcud1=\ED, kcuf1=\ER,
kcuu1=\EU, kf1=\Ea, kf10=\Ej, kf2=\Eb, kf3=\Ec,
kf4=\Ed, kf5=\Ee, kf6=\Ef, kf7=\Eg, kf8=\Eh, kf9=\Ei,
rev=\Ep, ri=\EI, rmso=\Eb7\Ec0, sgr0=\Eb7\Ec0\Et, smso=\Eb6\Ec4,
smul=\Es,
# color information. blue foreground is simulated with cyan
op=\Eb7\Ec0,
setf=\Eb%?%p1%{1}%=%t3
%e%p1%d%;,
setb=\Ec%p1%d,
# CTRM terminal emulator
ctrm|C terminal emulator,
am, xon,
# back_color_erase
# underlining is not allowed with colors: first, is is simulated by
# black on white, second, it disables background color manipulations.
bce,
cols#80, lh#0, lines#24, lm#0, lw#0, nlab#0, colors#8, pairs#64,
pb#19200, vt#6, ncv#2,
bel=^G, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=\b,
cud1=\n, cuf1=\EC, cup=\E&a%p2%dc%p1%dY, cuu1=\EA,
dch1=\EP$<2>, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
ht=\t$<2>, hts=\E1, il1=\EL, ind=\n, ip=$<2>,
is2=\E&jA\r, kbs=\b, kcub1=\Eu\r, kcud1=\Ew\r,
kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r, kf2=\Eq\r,
kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
kf8=\Ew\r, khome=\Ep\r, rmir=\ER, rmkx=\E&jA, smir=\EQ,
smkx=\E&jB, smso=\E&dD, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
# BLINKING, REVERSE and BOLD are allowed with colors,
# so we have to save their status in the static registers A, B and H
# respectively, to be able to restore them when color changes
# (because any color change turns off ALL attributes)
blink=\E&dA%{1}%PA,
# "enter_bold_mode" and "enter_reverse_mode" sequences alternates modes,
# rather then simply entering them. Thus we have to check the
# static register B and H to determine the status, before sending the
# escape sequence.
rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;,
bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;,
smul=\E&dD,
# sgr0 now must set the status of all 3 register (A,B,H) to zero
# and then reset colors
sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH,
# implementation of the protect mode would badly penalize the performance.
# we would have to use \E&bn sequence to turn off colors (as well as all
# other attributes), and keep the status of protect mode in yet another
# static variable. If someone really need this mode, they would have to
# create another terminfo entry.
sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH
%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;
%?%p4%t\E&dA%{1}%PA%;
%?%p6%t\E&dH%{1}%PH%;
%?%p2%t\E&dD%;,
# original color-pair: white on black.
# store the information about colors into static registers
op=\E&bn\E&bB\E&bG\E&bR
%{0}%PX%{0}%PY%{0}%PZ
%{1}%PW%{1}%PV%{1}%PU,
# set foreground color. it performs the following steps.
# 1) turn off all attributes
# 2) turn on the background and video attribues that have been turned
# on before (this information is stored in static registers X,Y,Z,A,B,H,D).
# 3) turn on foreground attributes
# 4) store information about foreground into U,V,W static registers
setf=\E&bn
%?%gA%t\E&dA%;
%?%gB%t\E&dB%;
%?%gH%t\E&dH%;
%?%gX%t\E&br%;
%?%gY%t\E&bg%;
%?%gZ%t\E&bb%;
%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW
%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV
%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
# turn on background: similar to turn on foreground above
setb=\E&bn
%?%gA%t\E&dA%;
%?%gB%t\E&dB%;
%?%gH%t\E&dH%;
%?%gU%t\E&bR%;
%?%gV%t\E&bG%;
%?%gW%t\E&bB%;
%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ
%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY
%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
# Info:
# CDE's dtterm terminal emulator entry from Martin Knutson
#
dtterm|CDE terminal emulator,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, am, bel=^G,
blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h,
colors#8, cols#80, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
el=\E[K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, home=\E[H, ht=\t,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
is2=\E\sF\E>\E[?1l\E[?7h\E[?45l, it#8, kbs=\b, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\E[11~, kf2=\E[12~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kfnd=\E[1~, khlp=\E[28~,
kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lines#24, lm#0, mir,
msgr, nel=\EE, op=\E[39;49m, pairs#8, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
sc=\E7, setab=\E[%p1%{40}%+%dm, setaf=\E[%p1%{30}%+%dm,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
sgr0=\E[0m, smacs=^N, smam=\E[?7h, smir=\E[4h, smso=\E[2;7m,
smul=\E[4m, tbc=\E[3g, xenl, xon,