OpenSolaris_b135/cmd/terminfo/tektronix.ti
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License"). You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
# All Rights Reserved
#ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.16 */
# # --------------------------------
#
# tektronix: TEKTRONIX
#
# Manufacturer: TEKTRONIX
# Class: III
tek4107|tek4109|4107|4109|tektronix terminals 4107 4109,
am, mir, msgr, ul, xenl, xt,
cvvis=\E%!3,
cnorm=\E%!0,
cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK,
clear=\ELZ, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#79, lines#29,
cuf1=\EC, ht=^I, it#8, ri=\EI, cuu1=\EA,
kcuu1=\EA, kcud1=\EB, kcuf1=\EC, kcub1=\ED, kbs=^H,
smso=\E%!1\E[7;5m$<2>\E%!0,
rmso=\E%!1\E[m$<2>\E%!0,
smul=\E%!1\E[4m$<2>\E%!0,
rmul=\E%!1\E[m$<2>\E%!0,
bold=\E%!1\E[1m$<2>\E%!0,
rev=\E%!1\E[7m$<2>\E%0,
blink=\E%!1\E[5m$<2>\E%!0,
dim=\E%!1\E[<0m$<2>\E%!0,
sgr0=\E%!1\E[m$<2>\E%!0,
sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m\E%%!0,
tek4105|4105|tektronix 4105,
am, il1=\E[1L, ed=\E[J, el=\E[K, clear=\E[2J\E[H,
cup=\E[%i%p1%2d;%p2%2dH,
cols#79, lines#29,
dch1=\E[1P, dl1=\E[1M,
home=\E[H, smir=\E[4h, rmir=\E[4l, mir,
cuf1=\E[1C, cud1=\E[1B, cuu1=\E[1A,
smacs=\E[1m, rmacs=\E[0m, msgr,
rmso=\E[=0;<1m, smso=\E[=2;<3m,
ul, smul=\E[=5;<2m, rmul=\E[=0;<1m,
is1=\E%!1\E[0m,
rev=\E[=1;<3m, bold=\E[=7;<4m, invis=\E[=6;<5, dim=\E[=1;<6m,
blink=\E[=3;<7m, sgr0=\E[=0;<1m,
smcup=\E%!1\E[?6l\E[2J, xenl, xt,
msgr, mir, kbs=^h, kcuu1=\E[1A, kcud1=\E[1B,
kcub1=\E[1D, kcuf1=\E[1C,
is2=\E%!1\E[?6141\E[0m,
cbt=\E[Z, cr=^M, ri=\E[T, ind=\E[S, it#8,
tbc=\E[1g, ht=^I, bel=^G,
tek|tek4012|4012|tektronix 4012,
cr=^M, cud1=^J, bel=^G, ff=^L$<1000>,
is2=\E^O, cub1=^H, clear=\E^L$<1000>, cols#75, lines#35, os,
tek4013|4013|tektronix 4013,
smacs=\E^N, rmacs=\E^O, use=4012,
tek4014|4014|tektronix 4014,
is2=\E^O\E9, cols#81, lines#38, use=tek4012,
tek4015|4015|tektronix 4015,
smacs=\E^N, rmacs=\E^O, use=4014,
tek4014-sm|4014-sm|tektronix 4014 in small font,
is2=\E^O\E\072, cols#121, lines#58, use=tek4014,
tek4015-sm|4015-sm|tektronix 4015 in small font,
smacs=\E^N, rmacs=\E^O, use=4014-sm,
tek4023|4023|tex|tektronix 4023,
cr=^M, cud1=^J, ind=^J, bel=^G, smso=^_P, rmso=^_@,
cup=\034%p2%' '%+%c%p1%' '%+%c, cuf1=\t, cub1=^H,
clear=\E^L$<4>, cols#80, lines#24, am, vt#4,
# Info:
# It is recommended that you run the 4025 at 4800 baud or less;
# various bugs in the terminal appear at 9600. It wedges at the
# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
# on keyboard don't work. You have to hit BREAK twice to get
# one break at any speed - this is a documented feature.
# Can't use cursor motion because it's memory relative, and
# because it only works in the workspace, not the monitor.
# Same for home. Likewise, standout only works in the workspace.
#
# el was commented out since vi and rogue seem to work better
# simulating it with lots of spaces!
#
# il1 and il had 145ms of padding, but that slowed down vi's ^U
# and didn't seem necessary.
#
4025|4027|4024|tek4025|tek4027|tek4024|4025cu|4027cu|tektronix 4024/4025/4027,
cr=^M, ind=^F^J, cud1=^F^J, bel=^G, am, da, db, ht=^I, it#8,
cub1=^H, lm#0, lines#34, cols#80, clear=^_era\r\n\n,
is2=\41com 31\r\n^_sto 9 17 25 33 41 49 57 65 73\r,
smkx=^_lea p4 /h/\r^_lea p8 /k/\r^_lea p6 / /\r^_lea p2 /j/\r^_lea f5 /H/\r,
rmkx=^_lea p2\r^_lea p4\r^_lea p6\r^_lea p8\r^_lea f5\r,
cuu1=^K, cuf1=^_rig\r,
ed=^_dli 50\r, cmdch=^_,
dch1=^_dch\r, ich1=^_ich\r ^H,
il1=^_up\r^_ili\r, dl1=^_dli\r^F,
il=^_up\r^_ili %p1%d\r, dl=^_dli %p1%d\r^F,
cuu=^_up %p1%d\r, cud=^_dow %p1%d\r,
cub=^_lef %p1%d\r, cuf=^_rig %p1%d\r,
tek4025-17|4025-17|4027-17|tek 4025 17 line window,
lines#17, use=4025,
tek4025-17-ws|4025-17-ws|4025-17ws|4027-17-ws|tek 4025 17 line window in workspace,
is2=\41com 31\r\n^_sto 9 17 25 33 41 49 57 65 73\r^_wor 17\r^_mon 17\r,
smcup=^_wor h\r, rmcup=^_mon h\r, smso=^_att e\r, rmso=^_att s\r, use=4025-17,
tek4025-ex|4025-ex|4025ex|4027-ex|tek 4025 w/!,
smcup=\41com 31\r, rmcup=^_com 33\r,
is2=^_com 33\r\n\41sto 9 17 25 33 41 49 57 65 73\r, use=4025,
tek4105-30|4105-30|4015 emulating 30 line vt100,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#30, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>,
el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=\t,
hts=\EH, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b,
kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>,
rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
sgr0=\E[m^O$<2>, smacs=^N, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
# Info:
# The 4110 series may be a wonderful graphics series, but they
# make the 4025 look good for screen editing.
#
# In the dialog area, you can't move the cursor off the bottom
# line.
#
# Out of the dialog area, ^K moves it up, but there is no way
# to scroll.
#
# Note that there is a floppy for free from Tek that makes the
# 4112 emulate the vt52 (use the vt52 termcap). There is also
# an expected enhancement that will use ANSI standard sequences.
#
# 4112 in non-dialog area pretending to scroll. It really wraps
# but vi is said to work (more or less) in this mode.
#
# 'vi' works reasonably well with this entry.
#
4112|4112-nd|4113|4114|tek4112|tektronix 4110 series,
cr=^M, cud1=^J, ind=^J, bel=^G, cuu1=^K, cub1=^H,
am, clear=\E^L, lines#34, cols#80,
smcup=\EKA0\ELV0\EMG0, rmcup=\EKA1\ELV1,
tek4112-d|4112-d|tek 4112 in dialog area,
am, clear=\ELZ, lines#34, cols#80, cuu1=^K,
tek4112-5|4112-5|4112 in 5 line dialog area,
lines#5, use=4112,
tek4115|4115|tektronix 4115,
am, xon,
cols#80, lines#34,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=\b,
cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=\n, invis=\E[8m, kbs=\b, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmso=\E[m,
rmul=\E[m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[0m, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
vpa=\E[%p1%{1}%+%dd,
# Info:
# t500 is a local entry for the oddball Tek 500 owned by Fluke
# Labs
#
t500|Tek series 500,
cr=^M, ind=^J, cud1=^J, bel=^G,
lines#25, cols#80, cub1=^H, cup=\E=%p1%p1%' '%+%c%p2%' '%+%c,
clear=^E$<20>, home=^T, bw, am,
# Info:
# I added the is string - straight Unix has ESC ; in the login
# string which sets a ct8500 into monitor mode (aka 4025 snoopy
# mode). The is string here cleans up a few things (but not
# everything).
#
ct8500|tektronix ct8500,
cr=^M, cud1=^J, ind=^J, bel=^G, cr=^M, cud1=^J, ind=^J, bel=^G,
il1=\E^L, am, cub1=^H, cbt=\E^I, bw, ed=\E^U, el=\E^T,
clear=\E^E, cup=\E|%p1%' '%+%c%p2%' '%+%c, cols#80,
da, db, dch1=\E^],
dl1=\E^M, ich1=\E^\, lines#25, cuf1=\ES, ht=^I, ri=\E^A, rmso=\E ,
smso=\E$, rmul=\E , cuu1=\ER, smul=\E\041, is2=^_\EZ\Ek,
sgr0=\E\s,
#
# Tektronix 4205 terminal. This entry contains information required
# by color curses
#
tek4205|4205|tektronix 4205,
# am is not defined because the wrap around occurs not when the char.
# is placed in the 80'th column, but when we are attempting to type
# the 81'st character on the line.
# bold, dim, and standout are simulated by colors and thus not allowed
# with colors
am, xenl, msgr, mir, ccc,
cols#80, lines#30, it#8, colors#8, pairs#64, ncv#49,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
il1=\E[1L, ed=\E[J, el=\E[K, clear=\E[2J\E[H,
il=\E[%p1%dL,
cup=\E[%i%p1%d;%p2%dH,
dch1=\E[1P, dl1=\E[1M,
home=\E[H, smir=\E[4h, rmir=\E[4l,
cuf1=\E[C, cud1=\E[B, cuu1=\E[A, cub1=\E[D,
cuf=\E[%p1%dC, cud=\E[%p1%dB, cuu=\E[%p1%dA, cub=\E[%p1%dD,
ech=\E%p1%dX, el1=\E[1K, ich=\E[%p1%d@,
smacs=, rmacs=, enacs=\E)0,
rmso=\E[=0;<1m, smso=\E[=2;<3m,
smul=\E[4m, rmul=\E[24m,
is1=\E%!0\ETM1\E%!1\E[0m,
rev=\E[7m, bold=\E[=7;<4m, invis=\E[=6;<5, dim=\E[=1;<6m,
blink=\E[5m, sgr0=\E[=0;<1m\E[24;25;27m,
smcup=\E%%!1\E[?6l\E[2J,
kbs=^h, kcuu1=\E[A, kcud1=\E[B,
kcub1=\E[D, kcuf1=\E[C,
.is2=\E%%!1\E[?6141\E[0m,
cbt=\E[Z, cr=^M, ind=\ED, ri=\EM,
tbc=\E[1g, ht=^I, bel=^G,
# tektroinix color table is mapped into the RGB color table
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4
%e%p1%{3}%=%t6
%e%p1%{4}%=%t1
%e%p1%{6}%=%t3
%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4
%e%p1%{3}%=%t6
%e%p1%{4}%=%t1
%e%p1%{6}%=%t3
%e%p1%d%;m,
# All colors are reset to factory specifications
oc=\E%!0
\ETFB0
0000
1F4F4F4
2F400
30F40
4A4C<F4
50F4F4
6F40F4
7F4F40
\E%!1,
op=\E[39;40m,
# using RGB notation to define colors. for arguments 1-3 the interval
# (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
# interval then maps into pre-defined value.
initc=\E%%!0
\ETF4
%?%p1%{0}%=%t0
%e%p1%{1}%=%t4
%e%p1%{2}%=%t3
%e%p1%{3}%=%t5
%e%p1%{4}%=%t2
%e%p1%{5}%=%t6
%e%p1%{6}%=%t7
%e1%;
%?%p2%{125}%<%t0
%e%p2%{250}%<%tA2
%e%p2%{375}%<%tA?
%e%p2%{500}%<%tC8
%e%p2%{625}%<%tD4
%e%p2%{750}%<%tE1
%e%p2%{875}%<%tE:
%eF4%;
%?%p3%{125}%<%t0
%e%p3%{250}%<%tA2
%e%p3%{375}%<%tA?
%e%p3%{500}%<%tC8
%e%p3%{625}%<%tD4
%e%p3%{750}%<%tE1
%e%p3%{875}%<%tE:
%eF4%;
%?%p4%{125}%<%t0
%e%p4%{250}%<%tA2
%e%p4%{375}%<%tA?
%e%p4%{500}%<%tC8
%e%p4%{625}%<%tD4
%e%p4%{750}%<%tE1
%e%p4%{875}%<%tE:
%eF4%;
\E%%!1,
kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD,
kf4=\EP, kf5=\EQ, kf6=\ER, kf7=\ES,