OpenSolaris_b135/tools/scripts/Install.1

.\"
.\" Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
.\" Use is subject to license terms.
.\"
.\" CDDL HEADER START
.\"
.\" The contents of this file are subject to the terms of the
.\" Common Development and Distribution License (the "License").
.\" You may not use this file except in compliance with the License.
.\"
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
.\" or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions
.\" and limitations under the License.
.\"
.\" When distributing Covered Code, include this CDDL HEADER in each
.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
.\" If applicable, add the following below this CDDL HEADER, with the
.\" fields enclosed by brackets "[]" replaced with your own identifying
.\" information: Portions Copyright [yyyy] [name of copyright owner]
.\"
.\" CDDL HEADER END
.\"
.TH Install 1 "14 Jan 2010"
.SH NAME
Install \- install a kernel from an ON workspace
.SH SYNOPSIS
.TP 8n
.B Install
.RB [ " \-w "
.IR workspace " ]"
.RB [ " \-s "
.IR "source dir" " ]"
.br
.RB [ " \-k  "
.IR "kernel arch" " ]"
.RB "[ " \-n " | " \-t|T
.IR target " ]"
.br
.RB [ " \-u|m|a " ]
.RB [ " \-v|V|q " ]
.RB [ " \-c|p " ]
.br
.RB [ " \-l "
.IR "library file" " ]"
.RB [ " \-L " ]
.RB [ " \-3 " ]
.RB [ " \-6 " ]
.RB [ " \-K " ]
.br
.RB [ " \-o "
{
.BR obj " | "
.B debug
}
]
.RB [ " \-d "
.IR "work dir" " ]"
.br
.RB [ " \-D "
.IR "library dir" " ]"
.RB [ " \-G "
.IB glomname " ]"
.RI [ " module ... " ]
.LP
or
.LP
.BR "Install \-R " "[ options ]"
.SH DESCRIPTION
.LP
.B Install
is a utility which simplifies the process of installing a 5.0 system.
.B Install
goes into a built ON workspace (or any kernel source tree),
looks at the Makefiles,
and figures out how to construct the /kernel and /usr/kernel directories.
It then creates a tarfile
.RB "(see " tar "(1))"
containing /kernel, /usr/kernel, and a few related /etc files.  If a
.I target ([user@]machine:/dir)
is specified, the tarfile is either copied to
.IR machine:/dir " (-T) or untarred on " "machine" " in " "/dir" " (-t),"
using the remote user id
.IR user ,
if specified.
With no options,
.B Install
creates a sun4c system from files in the current workspace (as indicated
by $SRC) and places the tarfile in /tmp/Install.username/Install.sun4c.tar.

.SH OPTIONS
.TP 20n
.BI "-w" " ws"
Install the system built in the ON workspace
.I ws.  ws
must be a built ON workspace \(em
.B Install
will not automatically invoke
.BR make "(1).  If " \-w " is not specified, " Install " uses the current
workspace (as indicated by $CODEMGR_WS).  If there is no current workspace,
.B Install
checks to see if you are in an appropriate source directory, e.g. uts/sun4c;
if so,
.B Install
takes files from there.  Otherwise,
.B Install
looks for files under $SRC/uts.
.TP
.BI "-s" " source directory"
where to look for files [default: $SRC/uts].
.TP
.BI "-k" " kernel arch"
the type of kernel to install.  The default is sun4c; however, if you invoke
.B Install
from $SRC/uts/sun4z,
.B Install
assumes you want a sun4z kernel.
.TP
.B "-n"
No target; just create the tarfile in
/tmp/Install.username/Install.sun4c.tar [default].
.BR "-n" " implies " "-p" .
.TP
.BI "-t" " target"
Install the system on
.I target ([user@]machine:/dir).
This means that kernel/unix is copied to
.I machine:/dir/kernel/unix,
etc.
.IR /dir " is typically either " / " or " /mnt.
.BR "-t" " implies " "-c" .
The default remote user id is the same as the local one ($LOGNAME).
.TP
.BI "-T" " target"
Copy the tarfile to
.I target ([user@]machine:/dir).
This creates the file
.I /dir/Install.tar
on
.I machine.
To finish the install, log on to
.I machine
as root, and type
.RB `` "cd /; tar xvf /dir/Install.tar" "''."
.BR "-T" " implies " "-c" .
.TP
.B "-u"
Install unix only.
.TP
.B "-m"
Install modules only.
.TP
.B "-a"
Install unix and all modules [default].
.TP
.B "-v"
Verbose mode.
.TP
.B "-V"
REALLY verbose mode.  Useful mainly for debugging.
.TP
.B "-q"
Quiet mode [default].  Only fatal messages are printed.
.TP
.B "-c"
Clean up.  After a successful install, delete the files created in
/tmp/Install.username.  This is the default behavior if a
.I target
is specified with
.BR "-t" " or " "-T" .
.TP
.B "-p"
Preserve temp files.  This is the default behavior when no
.I target
is specified
.RB ( "-n" ).
.TP
.B "-R"
Recover from a failed
.BR Install .
This is not required, it's just faster than restarting.
A typical scenario is for
.B Install
to run smoothly right up to the very end, but then die with
"Permission denied" when it tries to rsh/rcp to the target machine.
At this point, you log on to the target machine, diddle the permissions,
log off, and type
.RB `` "Install -R" "''."
.B Install
will only have to retry the rsh/rcp,
rather than rebuild the tarfile from scratch.
.TP
.BI "-d" " temp directory"
specifies where
.B Install
should create its temp files [default: /tmp/Install.username].  This is
useful if you have limited space in /tmp (\fBInstall\fR can take as
much as 100MB).
The suffix "Install.username" is always appended.
.TP
.B "-L"
add a system to your library.  This allows you to build a personal
collection of installable systems from various environments and for
various architectures.  When you type
.RB `` "Install -w /ws/ws_name -k arch -L" "'', " Install
creates a tarfile called
.I ws_name.arch.tar
in your library directory (~/LibInstall by default).
.BR "-L" " implies " "-c" .
.TP
.BI "-l" " library file"
Installs the system contained in
.I library file.
You may omit the ``.tar'' suffix.  For example,
.RB `` "Install -l my_ws.sun4c -t machine:/" ''
installs a system you previously built with
.B "-L"
(from sun4c files in my_ws) on 
.IR machine:/ .
This is equivalent to typing
.RB `` "rsh machine '(cd /; tar xvf -)' <~/LibInstall/my_ws.sun4c.tar" '',
but it's easier to remember.
.TP
.BI "-D" " lib directory"
specifies the library directory [default: $HOME/LibInstall].
.TP
.BI "-G " glomname
gloms /kernel and /usr/kernel together into a single /kernel directory.
Useful for development work, e.g. use "Install -G good [...]" to create a
"/kernel.good".
.TP
.BR "-o " "{ \fBobj\fP | \fBdebug\fP }"
object directory. The default is "debug".
.TP
.B \-3
32-bit modules only
.TP
.B \-6
64-bit modules only
.TP
.B \-K
Do not include kmdb misc module or dmods
.TP
.B "-h"
Help.  Prints a brief summary of
.BR Install "'s"
options.
.LP
If you are in a directory like $SRC/uts/sun4z when you invoke
.BR Install ,
it will infer that you want to install a sun4z system
from the current workspace.
.LP
If you supply a list of modules, it overrides any of the
.B "-uma"
options.  You only need to specify the basename of the
module(s), e.g. ``\fBInstall ufs nfs le\fR''.
``\fBInstall unix\fR'' is equivalent to ``\fBInstall -u\fR'', and
``\fBInstall modules\fR'' is equivalent to ``\fBInstall -m\fR''.
.LP
You can customize
.B Install
by creating a .Installrc file in your home directory.  .Installrc
should consist of a list of command-line-style options, e.g:
.LP
.B
	-w /ws/foo
.br
.B
	-t labmachine:/mnt -pv
.LP
.B Install
processes default options first, then .Installrc
options, then command-line options.  In the case of
conflicting options (e.g. \fB-uma\fR), the last one wins.
.LP
In order to use the most convenient form of
.BR Install " (``" "Install -t machine:/" "''),"
you will need to do the following on the target machine:
.LP
.br
	(1) add your machine name to the /etc/hosts.equiv file
.br
	(2) add your username to the /etc/{passwd,shadow} files
.br
	(3) chown -R yourself /kernel /usr/kernel
.br
	(4) chmod -R u+w /kernel /usr/kernel
.SH "ENVIRONMENT"
.LP
You can set the following variables in your environment:
.LP
ON_CRYPTO_BINS
.IP
file containing signed cryptographic binaries.  This is only needed if
you are not building the closed-source tree.
.LP
INSTALL_RC [default: $HOME/.Installrc]
.IP
file containing default options for \fBInstall\fR
.LP
INSTALL_STATE [default: $HOME/.Install.state]
.IP
where \fBInstall\fR keeps its state information
.LP
INSTALL_DIR [default: /tmp/Install.username]
.IP
where \fBInstall\fR does its work.  This can be overridden on
the command line with \fB\-d\fR.
.LP
INSTALL_LIB [default: $HOME/LibInstall]
.IP
where \fBInstall\fR gets/puts library files.  This can be overridden on
the command line with \fB\-D\fR.
.LP
INSTALL_CP [default: cp -p]
.IP
the command to copy files locally
.LP
INSTALL_RCP [default: rcp -p]
.IP
the command to copy files remotely
.bp
.SH "EXAMPLES"
.LP
.B
Install -w /ws/blort -t machine:/
.IP
.RI "installs the system built in workspace " /ws/blort " on " machine:/
.LP
.B
Install -w /ws/blort -T machine:/tmp
.br
.B
rsh machine -l root "cd /; tar xvf /tmp/Install.tar"
.IP
is an equivalent way to do the previous example
.LP
.B Install
.IP
makes a tarfile containing a sun4c kernel,
and places it in /tmp/Install.username/Install.sun4c.tar.  However, if you
are in one of the arch directories (e.g. $SRC/uts/sun4m) when you invoke
.BR Install ,
you will get a tarfile for that architecture instead.
.LP
.B
Install -k sun4m -w /ws/on493 -t mpbox:/ ufs
.IP
installs a new sun4m ufs module from workspace /ws/on493 on mpbox:/
.SH "FILES"
$HOME/.Installrc, $HOME/.Install.state
.SH "SEE ALSO"
.BR tar "(1), " rsh "(1), " rcp "(1)"
.SH "BUGS"
.BR tar "(1) and " rsh "(1)"
do not have particularly useful exit codes.  To compensate,
.B Install
feeds stderr through grep -v and throws away error messages which it
considers harmless.  If there's anything left,
.B Install
assumes it is fatal.  It's a hack, but it works.