OpenSolaris_b135/tools/scripts/wx.1

.\" CDDL HEADER START
.\"
.\" The contents of this file are subject to the terms of the
.\" Common Development and Distribution License (the "License").
.\" You may not use this file except in compliance with the License.
.\"
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
.\" or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions
.\" and limitations under the License.
.\"
.\" When distributing Covered Code, include this CDDL HEADER in each
.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
.\" If applicable, add the following below this CDDL HEADER, with the
.\" fields enclosed by brackets "[]" replaced with your own identifying
.\" information: Portions Copyright [yyyy] [name of copyright owner]
.\"
.\" CDDL HEADER END
.\"
.\" Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
.\" Use is subject to license terms.
.\"
.\" ident	"%Z%%M%	%I%	%E% SMI"
.\"
.TH wx 1 "16 April 2008"
.SH NAME
.I wx
\- tool to track changes to a workspace, follow ON gate rules and much more
.SH SYNOPSIS
\fBwx [<sub-command> [-D] [sub-command options]]\fP
.LP
.SH DESCRIPTION
.IX "OS-Net build tools" "wx" "" "\fBwx\fP"
.LP
.I wx
is a shell script to help the developer keep track of file changes in a
workspace, follow the ON gate rules and much more. 
.LP
Note, it is recommended that you use 
.I wx 
for all file manipulation instead of using sccs as this allows wx to
automatically track changes in the workspace instead of having to use
the update command.  See http://www.opensolaris.org/os/community/on/wx/
for more information about using wx.

.\" COMMANDS section
.LP
.SH COMMANDS

.TP 10
.B -D
The -D flag turns on debugging for any command.  Debugging information
is output to stderr.

.TP
.B access
shorthand for "wx ws access_control"

.TP
.B active 
alias for list 

.TP
.B apply <cmd>
apply cmd to all active files; for example,
"wx apply cat" cats every file

.TP
.B arcs [-u]
display all ARC cases in check-in comments

.TP
.B args
shorthand for "wx ws args"

.TP
.B backup [-i|-n|-z|-b|-t]
make backup copies of all active and renamed files and certain
wx state files (active, renamed, *.NOT).

-i: info about backups (backup dir and contents)

-n: no compression 

-z: use gzip, faster than bzip2 but less compression.

-b: use bzip2, slower but better compression.
Defaults to the compression of the previous backup.

-t: backup if wx files are newer than last backup.

.TP
.B bu 
alias for backup command

.TP
.B bugs [-u] [-N]
Display all bugids in check-in comments.  See \fBpbcom\fR below for a
description of the flags.

.TP
.B cddlchk [cddlchk options]
Warn about obsolete or corrupt CDDL blocks in active files.  Note that only
files that already contain a CDDL block will be checked unless the '-a' flag
is specified, and that files listed in wx/cddlchk.NOT will be skipped.

.TP
.B checkin
Alias for delget command.

.TP
.B checkout
Alias for edit command.

.TP
.B ci
Alias for checkin command.

.TP
.B co
Alias for checkout command.

.TP
.B codereview [-N] [codereview options]
generate environmentally friendly codereview diffs
for all active files.  -N indicates that delta
comments shouldn't be included in the output.

.TP
.B comchk
Warns if the comments' formats break ON rules.  In addition, this will
warn if the bug id doesn't match the given synopsis.  Note that this
performs a network connection to a server on the SWAN, so this may hang
depending on the availability of the server.  Completely detached operation
should fail smoothly (with a warning).

.TP
.B comments
display check-in comments for active files

.TP
.B copyright
Warns if there is a problem with the copyright message in active files.
Files listed in wx/copyright.NOT will be skipped.

.TP
.B create [-(c|C) comment_file] [-f] [-o] file [file ...]
Creates one or more files in the workspace.
(Updates active list)

-c comment_file: see delget.

-C comment_file: see delget.

-f: force create regardless of warnings,
(non-interactive).

-o: also check out file for further editing.

.TP
.B cstyle
run cstyle over all active .c and .h files.  Files listed in wx/cstyle.NOT
will be skipped. 

.TP
.B delete [-f] [file ...]
Delete one or more files from the workspace.
Will delete all files in active list if no file
args.  Note, for files brought over from parent,
this command actually moves the file under the
deleted_files/ subdir so it can be recovered.
For new files this command can remove the file
and file history completely.
(Updates active list if file is in there.)

-f : force delete regardless of warnings 
(non-interactive)
Warning, this will completely remove new
files from the workspace.  The backup
command will be automatically run before
doing delete -f.

.TP
.B delget [-(c|C) comment_file][-s][-f] [file ...] 
Check in all active files or files on command line (will do 'sccs
create' for files without file histories). Check in comments will be
those in active file.  See 'wx comments' for more info.

-c comment_file: use comment(s) in specified comment file when creating
file(s). Note, each comment should be on new line, blank lines not
allowed.  The comments in the active list will be replaced by the
comments in the comment_file for the files specified or all the entries
in the active list if no files specified. 

-C comment_file: Similar to -c but comments are appended to current
active list comments.

-f: force checkin, no checks, non-interactive.
Use this if your sure the files okay to checkin
otherwise this command will check for keyword
problems.

.TP
.B deltachk
Warns if there is more than one sccs delta in active files (more than 1
breaks ON rules unless putting back more than 1 bug and then there
should be at most 1 delta per bug if necessary).  Files listed in
wx/deltachk.NOT will be skipped.

.TP
.B diffs [file ...]
show sccs diffs for files (current vs previous version). 

Will show diffs for all active files if no files given on command line.
New files are not shown, use sub-command 'tdiffs' to include new
files. 

Will use WXDIFFCMD environment variable if set.  Hint, try: export
WXDIFFCMD="diff -bw -U 5"

.TP
.B dir
echo the wx directory path ($workspace/wx)

.TP
.B e <file>
edit the named wx control file, e.g. "wx e active".
The editor is $EDITOR if set, else vi.

.TP
.B ea
shorthand for "wx e active" (edit active list).  
Note, the format for each entry in the active
list is:

filepath
<empty line> # no spaces allowed
one or more comment lines # no blank lines between.
<empty line> # no spaces allowed, ends the entry.

In general, it is best to only edit the active list to update comments.
Use the other wx commands like edit or create to update the active list
when possible.

.TP
.B edit [-s] [file ...]	
check out either file(s) on command line or all active files if no file
args.  (Updates the active list.)

-s: silent, less sccs diagnostic output.  This is true for the other
commands that accept the -s flag.

.TP
.B egrep
see wx grep

.TP
.B eval <cmd>
like apply, but more general.  In fact,
"wx apply cmd" is implemented internally as
"wx eval 'cmd $file'".  When using eval,
you can refer to $dir, $file, $filepath,
$parent, and $workspace.  For example:
wx eval 'echo $dir; sccs prt $file | more'
will show the sccs history for each active file,
preceded by its directory.

.TP
.B extract
Alias for get command.

.TP
.B fullreview [-N] [codereview options]
generate full codereview diffs for all active files.
-N indicates that delta comments shouldn't be included in the output.

.TP
.B get [-k][-r #][-p] [file ...]
Get a copy of all active files or files on command
line.  By default this is a read only version of
the file.  Accepts 'sccs get' flags.  Here are some
of the more common:

-k: don't expand the sccs ID string

-r #: get specified version #

-p: output to stdout

.TP
.B grep <regular expression>
search all active files for regular expression; equivalent to "wx eval
\'echo $filepath; grep pattern $file'"

.TP
.B hdrchk
run 'hdrchk -a' over all active .h files.  Warns if header files (.h) do not
conform to ON style rules.  Note that this is not the same as running 'make
check' or 'nightly -C', which apply a stricter set of rules to a subset of ON
headers.  Skips files in wx/hdrchk.NOT.

.TP
.B help
print usage message

.TP
.B info	[file ...]
show all info about active files

.TP 
.B init [options] [src-root-dir]	
initialize workspace for wx usage

-f(t|q|n): non-interactive mode of update.  Use this to keep init from
asking questions.

-ft: thorough update (update both active, 
renamed and new lists with all diffs between parent
and current workspace).  Can be slow.

-fq: quick update (update active list with files
currently checked out in current workspace).

-fn: no update (just create empty active, 
renamed and new lists if they don't exist).

-s: keep active list sorted by default.  This will keep the active list
sorted whenever the active list is updated.  Must follow one of the
-f(t|q|n) args.

src-root-dir: optional path relative to top of workspace where wx will
search for files. Use "." to set src-root to top of workspace.  Default
is usr.

.TP
.B jstyle
run jstyle over all active .java files.  Files listed in wx/jstyle.NOT
will be skipped. 

.TP
.B keywords
run keywords check over all active files.  Warns if it find problems
with SCCS keywords. Skips files in wx/keywords.NOT.

.TP
.B list [-r|-p|-w] 
list active files (the ones you are working on)

-r: list only renamed active files.

-p: output list of both active and renamed files 
suitable for input to putback. 

-w: output list of both active and renamed files
suitable for input to webrev (see wx webrev 
subcommand below).

.TP
.B makestyle
run makestyle over all active Makefiles.

.TP
.B mv file newfile 	
Rename file to newfile
(Updates active list with new file name)

.TP
.B mv <file|dir> newdir 	
Renames dir or file to newdir.  If newdir exists
then dir will be subdir under newdir.  Note,
this renames all files in dir and can take a
while if there are a lot of files affected by
the rename.  (Updates active list)

.TP
.B nawk
see wx grep

.TP
.B new [-t]
List new active files (files that exist in child only)
Note, should be run before reedit (see reedit below).

-t: thorough, does not use new cache (slower but more
accurate if new cache isn't current).

.TP
.B nits [file ...]
nits checking.  Run cstyle, jstyle, hdrchk, copyright, cddlchk, and
keywords over files to which they are applicable (makestyle is not currently
run because it seems to be quite broken -- more noise than data).  This is a
subset of pbchk checks suitable for checking files during development.  Use
pbchk before doing the final putback.  Will run checks on all active files if
no file args.  Will skip checks for files listed in wx/nits.NOT.

.TP
.B out
find all checked-out files in workspace

.TP
.B outchk
Warns if there are files in the workspace that are checked out that are
not in the active list.  These files should either be in the active list
(see the "update -q" command) or they should not be checked out.

.TP
.B pb
alias for putback.

.TP
.B pbchk [file ...]
putback check.  Run cstyle, jstyle, hdrchk, copyright, cddlchk, keywords,
rmdelchk, deltachk, comchk, rtichk and outchk over all files to which they
are applicable (makestyle is not currently run because it seems to be quite
broken -- more noise than data).  Should be run before doing a putback.
Will run checks on all active files if no file args.
Will skip checks for files listed in wx/pbchk.NOT.

.TP
.B pbcom [-v] [-u] [-N]
display summarized comments suitable for putback
Default is to display only bugs and arc cases.  Will
display warnings about non-bug comments to stderr.

-v: display all comments verbatim including non-bug/arc 

-u: prevent sorting, order determined by active list.
Hint, putback will accept comments on stdin.

-N: prevent a network lookup to cross-check bugids with their synopses

.TP
.B pblist 
alias for list -p (see above).
                        
.TP
.B pdiffs [file ...]
show diffs against parent files

Will show diffs for all active files if no files given on command line.
New files are not shown, use sub-command 'tpdiffs' to include new
files.

Will use WXDIFFCMD environment variable if set. 

.TP
.B prt [-y]
show SCCS delta history for all active files

-y: only show latest delta entry

.TP
.B putback [-v] [-N] [other putback flags, see below]
putback active and renamed files.  Will use pbcom
output as the putback comments.

-v: pass comments verbatim to putback (see pbcom)

-N: don't cross-check bugids with their synopses (see pbcom)

Accepts -n, -p, -q putback flags ('man putback' for
more info).

.TP
.B recheckin
Alias for redelget command.

.TP
.B recheckout
Alias for reedit command.

.TP
.B reci
Alias for redelget command.

.TP
.B reco
Alias for reedit command.

.TP
.B redelget [-m] [-s] [file ...]
Similar to reedit but the file is checked in when the command is done.
This is the command to use to collapse new files to their initial delta.

.TP
.B reedit [-m] [-s] [file ...]
Collapse the sccs delta (file history) such that
all changes made to the file in the current
workspace are now in one delta.  If no files are
given on command line then all the active files
are processed.  The files are left in a checked
out state so you can make further changes if
required.  If not, run "wx delget" to check the
files in prior to putback.  Note, newly created
files will only have one delta entry after doing
'wx delget'.  Run this right after a resolve to
make all your changes look like a single delta.
This eliminates the uninteresting leaf deltas
that arise from resolving conflicts, so your
putbacks do not contain a bunch of noise about
every bringover/resolve you did in the interim.
Accepts the same compression flags as wx backup.  
[file ...] reedits files on command line.  This
adds files to active list if not already there.
                        
NOTE: reedit is appropriate for leaf workspaces
ONLY -- applying reedit to an interior-node
workspace would delete all childrens comments
and confuse Teamware tools in general.  
                        
Before using reedit it's a good idea to check
the output of the new command to make sure the
list of new files looks okay.  If files show up
as new that are not then DO NOT use the reedit
as it will destroy the file history.

NOTE: if a file is new, reedit will leave the file checked out.  In
order to keep the delta version at 1.1 redelget must be used for
checkin.

-m: only reedit files that have more that one delta as compared to
parent file.  New files will be recreated with comment found in active
list.

.TP
.B renamed [-a|-d|-p] 
list locally renamed files. The output format is:
"new_name previous_name". Note, deleted files are
a special case of rename. 

-a: list only renamed active files (same as list -r)

-d: list only deleted files

-p: show "new_name parent_name" (Note, parent_name
may not be the same as previous_name)

.TP
.B reset [-f] [file ...]
Resets file contents and history to that of parent file.  If the file
was renamed locally it will be reset to that of the parent.  It does not
work on new file (see uncreate).

NOTE: use with care.  If something goes wrong, do a wx restore from the
last backup and copy wx/tmp/nametable.orig to Codemgr_wsdata/nametable.

.TP
.B resolve [Teamware resolve args]
resolve bringover conflicts and reedit just merged files.  See 'man
resolve' for args.

.TP
.B restore [-f] [backup_dir]
restore a backup in a workspace (restores both active files and performs
file renames associated with that backup).  Also restores certain wx
state files (active, renamed, *.NOT, etc...).  A path to the directory
containing the backup to restore from can be optionally specified.

-f: non-interactive.  Will restore from last backup.

.TP
.B rm
Alias for delete command.

.TP
.B rmdelchk
Warns if sccs rmdel was run on active files (This causes Teamware
problems.) Files listed in wx/rmdelchk.NOT will be skipped.

.TP
.B rtichk
make sure RTI is approved for bugs/rfe's listed in active list comments.
(RTI is Request To Integrate and is filed using rtitool).  Will skip rtichk
if wx/rtichk.NOT exists.

.TP
.B sed
see wx grep

.TP
.B tdiffs [file ...]
total diffs, similar to the diffs sub-command, except new files are also
included in the output. New files are those listed by 'new' sub-command.

Will use WXDIFFCMD environment variable if set. 

.TP
.B tpdiffs [file ...]
total parent diffs, similar to the pdiffs sub-command, except new files are
also included in the output.  tpdiffs considers a file to be new if it does
not exist in the parent.

Will use WXDIFFCMD environment variable if set. 

.TP
.B uncheckout
Alias for unedit command.

.TP
.B unco
Alias for uncheckout command.

.TP
.B uncreate [-f] [file ...]
Undoes the create of a new file.  The file's active list entry, it's
SCCS history and the entry in the workspace nametable will be removed
but the file will stay in the workspace.  Will uncreate all new files in
active list if no file argument is specified.

.TP
.B unedit [-s][-f] [file ...] 
Returns file(s) to state prior to edit/checkout Note, files will be
unlocked and any changes made when file was last checked out will be
lost.  Unedit all active files if no files listed on command line.
(Updates active list)

-f: force unedit (non-interactive).  Will backup if wx files newer
than last backup.

.TP
.B update [-q|-r] [-s]
Update the active and renamed file lists by appending names of all files
that have been checked out, changed or renamed as compared to the parent
workspace.  This is the most accurate way of updating but it is slow.
All files in the workspace must be under SCCS control in order for
update to find them.  

This command will also rename active list file entries if it discovers
that the active file was renamed in the workspace (perhaps as a result
of a bringover).

Note, this command can be sped up in some cases by setting the PUTBACK
env. variable to use "cm_env -g -o putback". (See
http://webhome.holland.sun.com/casper/ for more info abou the turbo
def.dir.flp tool).

-q: quick update (only updates active list with files currently checked
out in workspace).  This is faster but will not update the renamed list
or find files that have been checked-in/delget'ed.  It will rename
active entries if it finds they have been renamed in the workspace.

-r: only update the renamed list.  Does not update the active list.

-s: sort active list.

.TP
.B version
print current version of this program

.TP
.B webrev [webrev-options]
Generates a webrev for active and renamed/deleted files.
Note, uses comments in the active list.  This is the
preferred way of reviewing code.
Files listed in wx/webrev.NOT will be skipped.

.TP
.B ws <file>
cat the named workspace control file, i.e.
$workspace/Codemgr_wsdata/file

.LP
.SH ENVIRONMENT VARIABLES
.LP
Here is a list environment variables that 
.I wx
references and the meaning of each variable.
.LP
.RE
.B BRINGOVER
.RS 5
Specifies the command wx uses to do a bringover (default is
"bringover").  This is useful if you want to use something like Casper
Dik's turbo-dir.flp scripts as in this example: 

export BRINGOVER='cm_env -g -o bringover'
.LP
.RE
.B PUTBACK
.RS 5

Specifies the command wx uses to do the putback (default is "putback").
This is useful if you want to use something like Casper Dik's
turbo-dir.flp scripts as in this example: 

export PUTBACK='cm_env -g -o putback'
.LP
.RE
.B WXDIFFCMD
.RS 5
Specifies the diff command and args for the 
.I wx 
diffs commands like diffs and pdiffs.  This is similar to the
CDIFFCMD and UDIFFCMD environment variables that webrev uses.
A good setting is:

export WXDIFFCMD='diff -bw -U5'
.LP
.RE
.B WXDIR
.RS 5
Specifies a non-default directory where 
.I wx 
will store its state files.  This is useful when running 
.I wx 
in a workspace where write permission isn't available or there is an
existing wx directory which should not be modified.  For example:

$ WXDIR=/tmp/my_wxdir wx init
.LP
.RE
.B WXWEBREV
.RS 5
Specifies the webrev that 
.I wx 
will use when running the wx webrev subcommand.  For example:
$ WXWEBREV=~/bin/webrev wx webrev

.SH EXAMPLES
.LP
See http://www.opensolaris.org/os/community/on/wx/ for
examples of how to use wx.

.SH BUGS
.LP
The new wx is slower that the old wx.  There are probably ways to make
it faster and hopefully this will be done one day.

.SH See Also
.LP
teamware, workspace, putback, sccs, webrev