OpenSolaris_b135/uts/intel/Makefile

#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# uts/intel/Makefile
#
# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
#	This makefile drives the production of all implementation architecture
#	independent modules for Intel processors.

UTSBASE = ..

include Makefile.intel

LINT_KMODS_X1	= $(LINT_KMODS:nsmb=)
LINT_KMODS_X2	= $(LINT_KMODS_X1:smbfs=)
LINT_KMODLIBS	= $(LINT_KMODS_X2:e1000g=)
LINT_LIBS	= $(LINT_LIB) $(GEN_LINT_LIB) \
		  $(LINT_KMODLIBS:%=$(LINT_LIB_DIR)/llib-l%.ln) \
		  $(CLOSED_LINT_KMODS:%=$(LINT_LIB_DIR)/llib-l%.ln) 

# EXPORT DELETE START
$(CLOSED_BUILD)LINT_LIBS	+= $(SVVS_KMODS:%=$(LINT_LIB_DIR)/llib-l%.ln)
$(CLOSED_BUILD)LINT_CLOSED_XMOD5	= $(CLOSED_XMODS:bnx=)
$(CLOSED_BUILD)LINT_CLOSED_XMOD4	= $(LINT_CLOSED_XMOD5:bnxe=)
$(CLOSED_BUILD)LINT_CLOSED_XMOD3	= $(LINT_CLOSED_XMOD4:lsimega=)
$(CLOSED_BUILD)LINT_CLOSED_XMOD2	= $(LINT_CLOSED_XMOD3:spwr=)
$(CLOSED_BUILD)LINT_CLOSED_XMOD1	= $(LINT_CLOSED_XMOD2:adpu320=)
$(CLOSED_BUILD)LINT_LIBS	+= $(LINT_XMODLIBS:%=$(LINT_LIB_DIR)/llib-l%.ln)

#
# dprov is delivered in the SUNWcryptoint package.
#
DRV_KMODS	+= dprov

# EXPORT DELETE END

#
#
def		:=	TARGET= def
def.prereq	:=	TARGET= def
all		:=	TARGET= all
all.prereq	:=	TARGET= all
install		:=	TARGET= install
install.prereq	:=	TARGET= all
clean		:=	TARGET= clean
clobber		:=	TARGET= clobber
lint		:=	TARGET= lint
lint.prereq	:=	TARGET= lint
modlintlib	:=	TARGET= modlintlib
modlist		:=	TARGET= modlist
modlist		:=	NO_STATE= -K $$MODSTATE$$$$
clean.lint	:=	TARGET= clean.lint
check		:=	TARGET= check
install_h	:=	TARGET= install_h
install_h.prereq	:=	TARGET= install_h

.KEEP_STATE:

.PARALLEL:	$(PARALLEL_KMODS) $(CLOSED_KMODS) $(SVVS) $(XMODS) \
		$(CLOSED_XMODS) config $(LINT_DEPS)

def all install clean clobber modlist: genassym $(KMODS) $(CLOSED_KMODS) \
	$(SVVS) $(XMODS) $(CLOSED_XMODS) config


#
# Privilege constants
#
# NOTE: The rules for generating priv_const.c file are shared between all
# processor architectures and and should be kept in sync. If they are changed in
# this file make sure that sparc rules are updated as well.
#
PRIVS_C = $(SRC)/uts/common/os/priv_const.c

$(PRIVS_C): $(PRIVS_AWK) $(PRIVS_DEF)
	$(NAWK) -f $(PRIVS_AWK) < $(PRIVS_DEF) cfile=$@

#
# Prerequisites
#
# The uts/Makefile defines build parallelism for x86 platforms such that i86pc,
# i86xpv and intel are all built in parallel. This requires building certain
# parts before the parallel build can start. The uts/Makefile appends the
# '.prereq' string to the original target and executes this Makefile to build
# any prerequisites needed before the full parallel build can start. After that
# make continues with normal targets.
#
# Any build prerequisites for x86 builds should be described here.
#
# genassym is used to build intel/dtrace and genunix, so it should be built
# first.
#
# priv_const.c is required to build genunix.
#
# genunix is used by everyone to ctf-merge with. Genunix is CTF-merged with
#   intel/ip so as a side effect this dependency builds intel/ip as part of the
#   prerequisites.
#
# intel/dtrace depends on i86pc/genassym, so we need to build both
# i86pc/genassym and intel/genassym.
#
all.prereq install.prereq def.prereq: genassym genunix FRC
	@cd ../i86pc/genassym; pwd; $(MAKE) $(@:%.prereq=%)

#
# i86pc lint libraries should be built first
#
lint.prereq: FRC
	@cd ../i86pc; pwd; $(MAKE) $(NO_STATE) lint

#
# Nothing to do for any other prerequisite targets.
#
%.prereq:

genunix: $(PRIVS_C)

modlintlib clean.lint: $(LINT_KMODS) $(CLOSED_LINT_KMODS) $(SVVS) \
	$(XMODS) $(CLOSED_XMODS)

genassym $(KMODS) $(SUBDIRS) config:	FRC
	@cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET)

$(CLOSED_KMODS):	FRC
	cd $(CLOSED)/uts/intel/$@; pwd; $(MAKE) $(NO_STATE) $(TARGET)

$(XMODS):	FRC
	@if [ -f $@/Makefile  ]; then \
		cd $@; pwd; $(MAKE) $(NO_STATE) $(TARGET); \
	else \
		true; \
	fi

$(SVVS) $(CLOSED_XMODS):	FRC
	@if [ -f $(CLOSED)/uts/intel/$@/Makefile  ]; then \
		cd $(CLOSED)/uts/intel/$@; pwd; \
		    $(MAKE) $(NO_STATE) $(TARGET); \
	else \
		true; \
	fi

install_h check:	FRC
	@cd sys; pwd; $(MAKE) $(TARGET)
	@cd asm; pwd; $(MAKE) $(TARGET)
	@cd ia32/sys; pwd; $(MAKE) $(TARGET)
	@cd amd64/sys; pwd; $(MAKE) $(TARGET)

#
# Work-around to disable acpica global crosscheck lint warnings
#
LGREP.intel =	grep -v 'intel/io/acpica'

#
#	Full kernel lint target.
#
LINT_TARGET	= globallint

# workaround for multiply defined errors
globallint := LINTFLAGS += -erroff=E_NAME_MULTIPLY_DEF2

globallint:
	@pwd
	@-$(ECHO) "\nFULL KERNEL: global crosschecks:"
	@-$(LINT) $(LINTFLAGS) $(LINT_LIBS) 2>&1 | $(LGREP.intel) | $(LGREP.2)

lint:	modlintlib .WAIT $(LINT_DEPS)

# EXPORT DELETE START

EXPORT_SRC:
	$(RM) Makefile+
	sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \
	    < Makefile > Makefile+
	$(MV) Makefile+ Makefile
	$(CHMOD) 444 Makefile

# EXPORT DELETE END

include ../Makefile.targ