OpenSolaris_b135/uts/sparc/ml/ip_ocsum.s

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#ident	"%Z%%M%	%I%	%E% SMI"

#include <sys/asm_linkage.h>

#if defined(lint)
#include <sys/types.h>
#endif	/* lint */

/*
 * ip_ocsum(address, halfword_count, sum)
 * Do a 16 bit one's complement sum of a given number of (16-bit)
 * halfwords. The halfword pointer must not be odd.
 *	%o0 address; %o1 count; %o2 sum accumulator; %o4 temp
 * 	%g2 and %g3 used in main loop
 *
 * (from @(#)ocsum.s 1.3 89/02/24 SMI)
 *
 */

#if defined(lint) 

/* ARGSUSED */
unsigned int
ip_ocsum(u_short *address, int halfword_count, unsigned int sum)
{ return (0); }

#else	/* lint */

	ENTRY(ip_ocsum)
	cmp	%o1, 31		! less than 62 bytes?
	bl,a	.dohw		!   just do halfwords
	tst	%o1		! delay slot, test count

	btst	31, %o0		! (delay slot)
	bz	2f		! if 32 byte aligned, skip
	nop

	!
	! Do first halfwords until 32-byte aligned
	!
1:
	lduh	[%o0], %g2	! read data
	add	%o0, 2, %o0	! increment address
	add	%o2, %g2, %o2	! add to accumulator, don't need carry yet
	btst	31, %o0		! 32 byte aligned?
	bnz	1b
	sub	%o1, 1, %o1	! decrement count
	!
	! loop to add in 32 byte chunks
	! The loads and adds are staggered to help avoid load/use
	! interlocks on highly pipelined implementations, and double
	! loads are used for 64-bit wide memory systems.
	!
2:
	sub	%o1, 16, %o1	! decrement count to aid testing
4:
	ldd	[%o0], %g2	! read data
	ldd	[%o0+8], %o4	! read more data
	addcc	%o2, %g2, %o2	! add to accumulator
	addxcc	%o2, %g3, %o2	! add to accumulator with carry
	ldd	[%o0+16], %g2	! read more data
	addxcc	%o2, %o4, %o2	! add to accumulator with carry
	addxcc	%o2, %o5, %o2	! add to accumulator with carry
	ldd	[%o0+24], %o4	! read more data
	addxcc	%o2, %g2, %o2	! add to accumulator with carry
	addxcc	%o2, %g3, %o2	! add to accumulator with carry
	addxcc	%o2, %o4, %o2	! add to accumulator
	addxcc	%o2, %o5, %o2	! add to accumulator with carry
	addxcc	%o2, 0, %o2	! if final carry, add it in
	subcc	%o1, 16, %o1	! decrement count (in halfwords)
	bge	4b
	add	%o0, 32, %o0	! delay slot, increment address
	
	add	%o1, 16, %o1	! add back in
	!
	! Do any remaining halfwords
	!
	b	.dohw
	tst	%o1		! delay slot, for more to do

3:
	add	%o0, 2, %o0	! increment address
	addcc	%o2, %g2, %o2	! add to accumulator
	addxcc	%o2, 0, %o2	! if carry, add it in
	subcc	%o1, 1, %o1	! decrement count
.dohw:
	bg,a	3b		! more to do?
	lduh	[%o0], %g2	! read data

	!
	! at this point the 32-bit accumulator
	! has the result that needs to be returned in 16-bits
	!
	sll	%o2, 16, %o4	! put low halfword in high halfword %o4
	addcc	%o4, %o2, %o2	! add the 2 halfwords in high %o2, set carry
	srl	%o2, 16, %o2	! shift to low halfword
	retl			! return
	addxcc	%o2, 0, %o0	! add in carry if any. result in %o0
	SET_SIZE(ip_ocsum)

#endif 	/* lint */