PWB1/usr/man/man1/rjestat.1

.th RJESTAT I 5/31/77
.sh NAME
rjestat \*- RJE status and enquiries
.sh SYNOPSIS
.bd rjestat
[
.bd \-
] [
.bd A
] [
.bd B
] [
.bd 1110
]
.sh DESCRIPTION
When invoked without the `\-' argument,
.it rjestat
reports the current status of RJE links
to the specified host computers.
When invoked with the `\-' argument,
.it rjestat
sets up an interactive status terminal.
If no hosts are cited explicitly,
the specification defaults to all those
for which a given PWB/UNIX is configured.
The ``host'' pseudonyms
.bd "A, B,"
and
.bd 1110
are built into the RJE software.
.bd A
and
.bd B
may be used to represent any IBM host machine.
Their actual destinations are immaterial to RJE.
The pseudonym
.bd 1110
is built into RJE
to represent any UNIVAC host.
.s3
To enter an enquiry via such a status terminal,
you must first generate an interrupt.
This can be done by hitting the DEL key
or the BREAK/INTERRUPT key.
.it Rjestat
will respond by prompting for enquiries directed
to each host in turn.
The line on which a prompt appears may be completed
to form a legitimate display command for that particular host.
If the line is terminated with a `\\',
the prompt will be repeated,
otherwise it will advance to the next host.
A carriage return alone indicates
that no enquiry is to be directed to a particular host.
You should expect to wait at least 30 seconds for a response.
.s3
An interrupt will temporarily halt
the display of responses.
It can therefore be used to inhibit roll-up
on a CRT terminal.
The display of responses will resume
after all prompts have been satisfied
(perhaps by null completions).
.s3
To exit from the status terminal, generate a quit signal
or type DEL followed by EOT.
.s3
The UNIVAC 1110 capability is only supported at the BTL Piscataway location.
.sh FILES
/dev/rje*	  DQS-11's used by RJE
.br
/usr/rje/sys	  PWB/UNIX system name
.br
/usr/rje/lines	  configuration table
.s3
And, in the directory for each RJE subsystem:
.s3
log		  activity log
.br
resp		  concatenated responses
.br
status		  message of the day
.br
xmit*		  files queued
.br
*mesg		  enquiry slot
.br
*init		  boot program
.sh "SEE ALSO"
.it "Guide to IBM Remote Job Entry for PWB/UNIX Users"
by A. L. Sabsevitz.
.br
.it "OS/VS2 HASP II Version 4 Operator's Guide,"
IBM SRL #GC27-6993.
.br
.it "Operator's Library: OS/VS2 Reference (JES2),"
IBM SRL #GC38-0210.