Ultrix-3.1/sys/sas/m11dist
SCCSID="@(#)m11dist 3.2 10/13/87"
# ULTRIX-11 m11dist Fred Canter
# Makes RX50 kits on BEDROCK (UEG's PDP-11/70)
#
# m11dist make all diskettes
# m11dist [name] make only the named diskette
#
# Must be in directory /usr/sys/sas!
# Needs ready command in /usr/sys/sas!
# Needs these directories: /bvsas, /bvroot, /bvusr, & /bvos
RX=rx2
if test -r /usr/staff/fred/RX_BEDROCK
then RX=rx1
fi
if test $# = 2
then shift
else
echo ""
echo "Make ULTRIX-11 Micro/pdp-11 distribution on RX50 diskettes."
echo ""
if test -r /usr/staff/fred/RX_BEDROCK
then echo -n "Use RX50 drive ONE"
else echo -n "Use RX50 drive TWO"
fi
echo " when making diskettes"
echo ""
echo "Mount the master RX50 ROOT and /USR pack in RL02 unit zero."
echo "Mount the master RX50 OPTIONAL SOFTWARE pack in RL02 unit one."
echo "Mount the RM03 binary master pack in RM03 unit one."
echo ""
echo "WRITE PROTECT RL02 units zero and one, and RM03 unit one."
ready
echo ""
if test $# = 0
then
echo -n "Check file systems <y or n> ? "
read YN
if test $YN = y
then
fsck -t /tmp/fred.fsck1234 /dev/rhp10 /dev/rhp11 /dev/rhp14
fsck -t /tmp/fred.fsck1234 /dev/rrl00 /dev/rrl01 /dev/rrl10 /dev/rrl11
if test $? != 0
then exit
fi
fi
fi
fi
: x is a dummy argument, tells m11dist it called itself.
: all x really does is inhibit the initial setup messages.
if test $# = 0
then L=y
while test $L = y
do
m11dist x boot
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x root
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x usr
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x sysgen1
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x sysgen2
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x sysgen3
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x sysgen4
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x usep
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x uucp
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x tcpip
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x f77
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x pascal
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x sccs
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x plot
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x usat
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x docprep1
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x docprep2
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x docprep3
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x spell
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x dict
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x learn1
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x learn2
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x orphans
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x games
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x man1
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x man2
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x man3
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x man4
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
while test $L = y
do
m11dist x man5
if test $? = 0
then break
else echo ""
echo -n "FATAL ERROR: try again <y or n> ? "
read YN
if test $YN != y
then break
fi
fi
done
exit
fi
case $1 in
boot) S=0
echo ""
echo "Mount the BOOT diskette."
echo ""
ready
echo ""
echo "Copying boot block and files to boot diskette"
# Boot file system size is 512 blocks, but we write the
# entire diskette to ensure it can be copied by the SDC.
dd if=/dev/rrl10 of=/dev/r$RX bs=10b count=80
if test $? != 0
then S=1
fi
/etc/mount /dev/$RX /bvsas
if test $? != 0
then S=1
fi
ls -l /bvsas
/etc/umount /dev/$RX
echo "fsck /dev/r$RX"
fsck /dev/r$RX
if test $? != 0
then S=1
fi
if test $S != 0
then exit 1
fi
echo ""
echo "BOOT diskette completed"
echo ""
;;
root) echo ""
echo "Mount the first ROOT diskette."
echo ""
ready
echo ""
echo "dump 0ymf /dev/r$RX /dev/rrl00"
dump 0ymf /dev/r$RX /dev/rrl00
if test $? != 0
then exit 1
fi
echo ""
echo "ROOT diskettes completed"
;;
usr) echo ""
echo "Mount the first USR diskette."
echo ""
ready
echo ""
echo "dump 0ymf /dev/r$RX /dev/rrl01"
dump 0ymf /dev/r$RX /dev/rrl01
if test $? != 0
then exit 1
fi
echo ""
echo "USR diskettes completed"
;;
sysgen1) S=0
echo ""
echo "Mount SYSGEN #1 diskette."
echo ""
ready
/etc/mount /dev/rl11 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./sys/conf \
./sys/sys/*.o
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/rl11
if test $S != 0
then exit 1
fi
echo ""
echo "SYSGEN #1 diskette completed"
;;
sysgen2) S=0
echo ""
echo "Mount SYSGEN #2 diskette."
echo ""
ready
echo "/etc/mkfs /dev/r$RX rx50.proto rx50 23 sysgn2 distr"
/etc/mkfs /dev/r$RX rx50.proto rx50 23 sysgn2 distr
if test $? != 0
then S=1
fi
/etc/mount /dev/$RX /bvusr
/etc/mount /dev/rl11 /bvos -r
cd /bvos/sys/ovsys
ar r /bvusr/LIB1_ov *.o
cd /bvos/sys/ovnet
ar r /bvusr/LIB3_ov *.o
cd /bvusr
chog bin *
chmod 644 *
cd /
/etc/umount /dev/rl11
/etc/umount /dev/$RX
if test $S != 0
then exit 1
fi
fsck -p /dev/r$RX
echo ""
echo "SYSGEN #2 diskette completed"
;;
sysgen3) S=0
echo ""
echo "Mount SYSGEN #3 diskette."
echo ""
ready
/etc/mount /dev/rl11 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./sys/sys/LIB1_id ./sys/dev/LIB2_id
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/rl11
if test $S != 0
then exit 1
fi
echo ""
echo "SYSGEN #3 diskette completed"
;;
sysgen4) S=0
echo ""
echo "Mount SYSGEN #4 diskette."
echo ""
ready
echo "/etc/mkfs /dev/r$RX rx50.proto rx50 23 sysgn4 distr"
/etc/mkfs /dev/r$RX rx50.proto rx50 23 sysgn4 distr
if test $? != 0
then S=1
fi
/etc/mount /dev/$RX /bvusr
/etc/mount /dev/rl11 /bvos -r
cd /bvos/sys/ovdev
cp asmfix? /bvusr
chog sys /bvusr/asmfix?
chmod 644 /bvusr/asmfix?
ar r /bvusr/LIB2_ov *.o
cd /bvos/sys/net
ar r /bvusr/LIB3_id *.o
cd /bvusr
chog bin *
chmod 644 *
cd /
/etc/umount /dev/rl11
/etc/umount /dev/$RX
if test $S != 0
then exit 1
fi
fsck -p /dev/r$RX
echo ""
echo "SYSGEN #4 diskette completed"
;;
usep) S=0
echo ""
echo "Mount USEP diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX ./usep
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "USEP diskette completed"
;;
uucp) S=0
echo ""
echo "Mount UUCP diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./lib/uucp
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "UUCP diskette completed"
;;
tcpip) S=0
echo ""
echo "Mount TCP/IP diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./ucb/rlogin \
./ucb/rcp\
./ucb/rwho \
./ucb/ruptime \
./ucb/talk \
./ucb/telnet \
./ucb/rsh \
./ucb/netstat \
./ucb/ftp \
./ucb/tftp \
./etc/ftpd \
./etc/inetd \
./etc/miscd \
./etc/rexecd \
./etc/rlogind \
./etc/routed \
./etc/rshd \
./etc/syslog \
./etc/talkd \
./etc/tftpd
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "TCP/IP diskette completed"
;;
f77) S=0
echo ""
echo "Mount F77 diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./bin/ratfor \
./bin/f77 \
./lib/f77_strings \
./lib/f77pass1id \
./lib/f77pass1ov \
./lib/libF77.a \
./lib/libI77.a \
./lib/libU77.a
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "F77 diskette completed"
;;
pascal) S=0
echo ""
echo "Mount PASCAL diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./bin/pi40 \
./bin/pi70 \
./bin/pix \
./bin/px40 \
./bin/px70 \
./bin/pxp \
./lib/how_pi \
./lib/how_pix \
./lib/how_pxp \
./lib/npx_header \
./lib/pi1.2strings \
./lib/libsa.a
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "PASCAL diskette completed"
;;
sccs) S=0
echo ""
echo "Mount SCCS diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./bin/dls \
./bin/dcat \
./bin/dcp \
./bin/dlogin \
./bin/drm \
./etc/telnetd \
./etc/rwhod \
./etc/dgated \
./bin/admin \
./bin/bdiff \
./bin/comb \
./bin/delta \
./bin/get \
./bin/sccshelp \
./bin/prs \
./bin/prt \
./bin/rmchg \
./bin/unget \
./bin/val \
./bin/vc \
./bin/what \
./bin/sccs \
./bin/sccsdiff \
./bin/cdc \
./bin/rmdel \
./bin/sact \
./lib/help/ad \
./lib/help/bd \
./lib/help/cb \
./lib/help/cm \
./lib/help/cmds \
./lib/help/co \
./lib/help/de \
./lib/help/default \
./lib/help/ge \
./lib/help/he \
./lib/help/prs \
./lib/help/rc \
./lib/help/un \
./lib/help/ut \
./lib/help/vc
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "SCCS diskette completed"
;;
plot) S=0
echo ""
echo "Mount PLOT diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./bin/uucp \
./bin/uulog \
./bin/uuname \
./bin/uupoll \
./bin/uustat \
./bin/uux \
./bin/plot \
./bin/tk \
./bin/tek \
./bin/tla50 \
./bin/tla100 \
./bin/tregis \
./bin/t300 \
./bin/t300s \
./bin/t450 \
./bin/vplot \
./lib/libtla50.a \
./lib/libtla100.a \
./lib/libtgigi.a \
./lib/libtregis.a \
./lib/libt300.a \
./lib/libt300s.a \
./lib/libt4014.a \
./lib/libt450.a \
./lib/libplot.a
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "PLOT diskette completed"
;;
spell) S=0
echo ""
echo "Mount SPELL diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./bin/spell \
./lib/spell70 \
./lib/spell40 \
./lib/spellin70 \
./lib/spellin40 \
./lib/spellout70 \
./lib/spellout40 \
./dict/hlista70 \
./dict/hlista40 \
./dict/hlistb70 \
./dict/hlistb40 \
./dict/hstop70 \
./dict/hstop40
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "SPELL diskette completed"
;;
usat) S=0
echo ""
echo "Mount USAT diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./bin/usat \
./lib/usat \
./bin/struct \
./lib/struct/beautify \
./lib/struct/structure70 \
./lib/struct/structure40
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "USAT diskette completed"
;;
dict) S=0
echo ""
echo "Mount DICTIONARY diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./dict/american \
./dict/british \
./dict/stop \
./dict/words \
./src/userdev
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "DICTIONARY diskette completed"
;;
learn1) S=0
echo ""
echo "Mount LEARN #1 diskette."
echo ""
ready
echo "/etc/mkfs /dev/r$RX 400 rx50 23 learn1 distr"
/etc/mkfs /dev/r$RX 400 rx50 23 learn1 distr
if test $? != 0
then S=1
fi
/etc/mount /dev/$RX /bvusr
cd /bvusr
/etc/mount /dev/hp14 /bvos -r
cp /bvos/bin/learn .
cp /bvos/lib/learn/Linfo .
cp /bvos/lib/learn/Xinfo .
cd /bvos/lib/learn/C
ar r /bvusr/C.a *
cd /bvos/lib/learn/editor
ar r /bvusr/editor.a *
cd /bvusr
chog bin *
chmod 644 *
chmod 755 learn
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
/etc/umount /dev/$RX
if test $S != 0
then exit 1
fi
fsck /dev/r$RX
echo ""
echo "LEARN #1 diskette completed"
;;
learn2) S=0
echo ""
echo "Mount LEARN #2 diskette."
echo ""
ready
echo "/etc/mkfs /dev/r$RX 400 rx50 23 learn2 distr"
/etc/mkfs /dev/r$RX 400 rx50 23 learn2 distr
if test $? != 0
then S=1
fi
/etc/mount /dev/$RX /bvusr
cd /bvusr
/etc/mount /dev/hp14 /bvos -r
cp /bvos/lib/learn/lcount .
cp /bvos/lib/learn/tee .
cd /bvos/lib/learn/eqn
ar r /bvusr/eqn.a *
cd /bvos/lib/learn/vi
ar r /bvusr/vi.a *
cd /bvos/lib/learn/files
ar r /bvusr/files.a *
cd /bvos/lib/learn/macros
ar r /bvusr/macros.a *
cd /bvos/lib/learn/morefiles
ar r /bvusr/morefiles.a *
cd /bvusr
chog bin *
chmod 644 *
chmod 755 lcount tee
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
/etc/umount /dev/$RX
if test $S != 0
then exit 1
fi
fsck /dev/r$RX
echo ""
echo "LEARN #2 diskette completed"
;;
docprep1) S=0
echo ""
echo "Mount DOCPREP #1 diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./bin/nroff \
./bin/roff \
./bin/troff \
./bin/tbl40 \
./bin/tbl70 \
./bin/eqn \
./bin/neqn \
./bin/checkeq \
./bin/refer70 \
./bin/refer40 \
./bin/checkmm \
./bin/mm \
./bin/mmt \
./bin/mvt \
./bin/osdd
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "DOCPREP #1 diskette completed"
;;
docprep2) S=0
echo ""
echo "Mount DOCPREP #2 diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX \
./lib/refer/hunt70 \
./lib/refer/hunt40 \
./lib/refer/inv \
./lib/refer/mkey \
./dict/papers \
./lib/help/term \
./lib/help/text \
./lib/suftab \
./lib/tmac \
./lib/font \
./lib/ms \
./lib/me \
./lib/term
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "DOCPREP #2 diskette completed"
;;
docprep3) S=0
echo ""
echo "Mount DOCPREP #3 diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX ./lib/macros
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "DOCPREP #3 diskette completed"
;;
games) S=0
echo ""
echo "Mount GAMES diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX ./games
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "GAMES diskette completed"
;;
orphans) S=0
echo ""
echo "Mount ORPHANS diskette."
echo ""
ready
/etc/mount /dev/hp14 /bvos -r
cd /bvos
tar cbf 10 /dev/r$RX ./orphan
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp14
if test $S != 0
then exit 1
fi
echo ""
echo "ORPHANS diskette completed"
;;
man1) S=0
echo ""
echo "Mount MANUALS #1 diskette."
echo ""
ready
/etc/mount /dev/hp16 /bvproto -r
cd /bvproto
# 290 Kbytes
tar cbf 10 /dev/r$RX ./man/man1/[a-l]*
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp16
if test $S != 0
then exit 1
fi
echo ""
echo "MANUALS #1 diskette completed"
;;
man2) S=0
echo ""
echo "Mount MANUALS #2 diskette."
echo ""
ready
/etc/mount /dev/hp16 /bvproto -r
cd /bvproto
# 270 Kbytes
tar cbf 10 /dev/r$RX ./man/man1/[m-z]*
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp16
if test $S != 0
then exit 1
fi
echo ""
echo "MANUALS #2 diskette completed"
;;
man3) S=0
echo ""
echo "Mount MANUALS #3 diskette."
echo ""
ready
/etc/mount /dev/hp16 /bvproto -r
cd /bvproto
# 290 Kbytes
tar cbf 10 /dev/r$RX ./man/man2 ./man/man4
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp16
if test $S != 0
then exit 1
fi
echo ""
echo "MANUALS #3 diskette completed"
;;
man4) S=0
echo ""
echo "Mount MANUALS #4 diskette."
echo ""
ready
/etc/mount /dev/hp16 /bvproto -r
cd /bvproto
# 315 Kbytes
tar cbf 10 /dev/r$RX ./man/man3
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp16
if test $S != 0
then exit 1
fi
echo ""
echo "MANUALS #4 diskette completed"
;;
man5) S=0
echo ""
echo "Mount MANUALS #5 diskette."
echo ""
ready
/etc/mount /dev/hp16 /bvproto -r
cd /bvproto
# 290 Kbytes
tar cbf 10 /dev/r$RX ./man/man5 ./man/man6 ./man/man7 ./man/man8
if test $? != 0
then S=1
fi
cd /
/etc/umount /dev/hp16
if test $S != 0
then exit 1
fi
echo ""
echo "MANUALS #5 diskette completed"
;;
*) exit 1 ;;
esac