Ultrix-3.1/src/cmd/mkconf/mkc_str.c
/**********************************************************************
* Copyright (c) Digital Equipment Corporation 1984, 1985, 1986. *
* All Rights Reserved. *
* Reference "/usr/src/COPYRIGHT" for applicable restrictions. *
**********************************************************************/
static char Sccsid[] = "@(#)mkc_str.c 3.0 4/21/86";
char *stra40[] =
{
"/ low core",
"",
0
};
char *stra70[] =
{
"/ low core",
"",
".data",
0
};
char *stra1[] =
{
"ZERO:",
"",
"br4 = 200",
"br5 = 240",
"br6 = 300",
"br7 = 340",
"",
". = ZERO+0",
0
};
/*
* WARNING WARNING WARNING WARNING WARNING
*
* DO NOT change the following string without
* first checking /usr/src/cmd/cc.c, first
* lines of code after main().
* Location zero identifies the type of kernel.
*/
char *stra2id[] =
{
" svi0; br7+0. / stray vector thru zero logger",
" / loc 0 = 4, says SID kernel",
0
};
/*
* WARNING WARNING WARNING WARNING WARNING
*
* DO NOT change the following string without
* first checking /usr/src/cmd/cc.c, first
* lines of code after main().
* Location zero identifies the type of kernel.
*/
char *stra2ov[] =
{
" 3; br7+0. / BPT to catch jump/vector -> 0",
" / loc 0 = 3, says OV kernel",
0
};
char *stra3[] =
{
"",
"/ trap vectors",
" trap; br7+0. / bus error",
" trap; br7+1. / illegal instruction",
" trap; br7+2. / bpt-trace trap",
" trap; br7+3. / iot trap",
" trap; br7+4. / power fail",
/*@
" trap; br7+5. / emulator trap",
@*/
/*@*/ " ovint; br5+5. / emulator trap",
" start;br7+6. / system (overlaid by 'trap')",
"",
". = ZERO+40",
"",
0,
};
char *strb[] =
{
"",
". = ZERO+240",
" trap; br7+7. / programmed interrupt",
" trap; br7+8. / floating point",
" trap; br7+9. / segmentation violation",
0
};
char *strc[] =
{
"",
"/ floating vectors",
"",
". = ZERO+300",
0,
};
/*
char *osizcmd = {"size ../ovsys/*.o ../ovdev/*.o ../ovnet/*.o > text.sizes"};
char *ssizcmd = "size ../sys/LIB1_id ../dev/LIB2_id ../net/*.o > text.sizes";
*/
char *osizcmd = "(cd ../ovsys; size *.o; cd ../ovdev; size *.o;\
cd ../ovnet; size *.o)> text.sizes";
char *ssizcmd = "(cd ../sys; size LIB1_id; size *.o; cd ../dev;\
size LIB2_id; cd ../net; size *.o )> text.sizes";
char *cmcmd = {"chmod 744 ovload"};
char *strovh[] =
{
"ld -X -k -n -o unix_ov l.o dump_ov.o mch_ov.o c_ov.o dds_ov.o tds_ov.o nds_ov.o dksizes_ov.o \\",
0,
};
char *strovh1[] =
{ "ld -X -k -i -o unix_id l.o dump_id.o mch_id.o c.o dds.o tds.o nds.o dksizes.o \\",
0
};
char *strovl[] =
{
"-L \\",
"\t../ovsys/trap.o \\",
"\t../ovsys/slp.o \\",
/* "\t../ovsys/rdwri.o \\", */
"\t../ovsys/clock.o \\",
/* "\t../ovsys/alloc.o \\", */
"\t../ovsys/sysent.o \\",
"\t../ovsys/prim.o \\",
"\t../ovsys/prf.o \\",
/* "\t../ovsys/pipe.o \\", */
"\tec.o",
0,
};
char *strovl1[] =
{
"-L \\",
"\t../sys/LIB1_id \\",
"\t../dev/LIB2_id \\",
"\tec.o",
0
};
char *strovz[] =
{
"-Z \\",
0,
};
char *strd1[] =
{
"",
"/ Interface to stray vector error logging",
"",
".text",
".globl _sv0, _sv100, _sv200, _sv300, _sv400, _sv500, _sv600, _sv700",
"",
0
};
char *strd2[] =
{
"/ BPT required for jump/vector -> zero error handling.",
"3\t/ BPT - DO NOT MOVE !",
"0\t/ Place holder, DO NOT MOVE !",
"",
0
};
char *strd3[] =
{
"svi0:\tjsr\tr0,call; jmp _sv0\t/stray vector from 0-74",
"svi100:\tjsr\tr0,call; jmp _sv100",
"svi200:\tjsr\tr0,call; jmp _sv200",
"svi300:\tjsr\tr0,call; jmp _sv300",
"svi400:\tjsr\tr0,call; jmp _sv400",
"svi500:\tjsr\tr0,call; jmp _sv500",
"svi600:\tjsr\tr0,call; jmp _sv600",
"svi700:\tjsr\tr0,call; jmp _sv700",
"",
"//////////////////////////////////////////////////////",
"/ interface code to C",
"//////////////////////////////////////////////////////",
"",
".globl call, trap",
0
};
char *strd4[] =
{
"",
"/ Dummy instructions to force loading of certain data",
"/ structures first in BSS, so they can be mapped by the",
"/ first unibus map register (_ub_end used for size check).",
"",
".globl _cfree",
"",
"\tmov\t_cfree,r0\t/ WARNING: _cfree must be first",
"",
0
};
char *stre[] =
{
"#include <sys/param.h>",
"#include <sys/systm.h>",
"#include <sys/buf.h>",
"#include <sys/tty.h>",
"#include <sys/conf.h>",
"#include <sys/proc.h>",
"#include <sys/text.h>",
"#include <sys/dir.h>",
"#include <sys/user.h>",
"#include <sys/file.h>",
"#include <sys/inode.h>",
"#include <sys/acct.h>",
"#include <sys/mount.h>",
"#include <sys/map.h>",
"#include <sys/callo.h>",
"#include <sys/mbuf.h>",
"#include \"dds.h\"",
"",
"int nulldev();",
"int nodev();",
0
};
char *stre1[] =
{
"struct bdevsw bdevsw[] =",
"{",
0,
};
char *strf[] =
{
" 0",
"};",
"",
0,
};
char *strf1[] =
{
"",
"int ttselect(), seltrue();",
"",
"struct cdevsw cdevsw[] =",
"{",
0,
};
char strg[] =
{
" 0\n\
};\n\
int rootdev = makedev(%d, %d);\n\
int swapdev = makedev(%d, %d);\n\
int pipedev = makedev(%d, %d);\n\
int el_dev = makedev(%d, %d);\n\
int nldisp = %d;\n\
daddr_t swplo = %ld;\n\
int nswap = %u;\n\
daddr_t el_sb = %ld;\n\
int el_nb = %u;\n\
"};
char strg1[] =
{
" \n\
struct buf buf[NBUF];\n\
struct inode inode[%d];\n\
struct mount mount[%d];\n"
};
char strg2[] =
{
"struct buf bfreelist;\n\
struct acct acctbuf;\n\
struct inode *acctp;\n\
struct map coremap[%d];\n\
struct map swapmap[%d];\n\
int ub_end;\n\
#ifndef UCB_CLIST\n\
struct cblock cfree[%d];\n\
#else UCB_CLIST\n\
struct cblock *cfree;\n\
#endif UCB_CLIST\n\
char msgbuf[%d];\n"
};
char strg3[] =
{
" \n\
/*\n\
* System table sizes, used by commands like\n\
* ps & pstat to free them from param.h.\n\
*/\n\
\n"
};
char strg4[] =
{
"int nbuf = NBUF;\n\
int nproc = NPROC;\n\
int ninode = %d;\n\
int ntext = NTEXT;\n\
int nofile = NOFILE;\n\
int nsig = NSIG;\n\
int nfile = NFILE;\n\
int nmount = %d;\n\
int mapsize = %d;\n\
int ncall = %d;\n\
int nclist = %d;\n\
int elbsiz = %d;\n\
int maxuprc = %d;\n\
int timezone = (%d*60);\n\
int dstflag = %d;\n\
int ncargs = %d;\n\
int hz = %d;\n\
int msgbufs = %d;\n\
unsigned int maxseg = %u;\n\
long cdlimit = %ld;\n"
};
char *strh[] =
{
" 0",
"};",
"",
"int ttstart();",
"int ntyclose(), ntread(), ntwrite(), ntyinput();",
"int ttioctl();",
0
};
char *strj[] =
{
"struct linesw linesw[] =",
"{",
" nulldev, nulldev, ntread, ntwrite, ttioctl,",
" ntyinput, nodev, nulldev, ttstart, nulldev, /* 0 */",
" nulldev, ntyclose, ntread, ntwrite, ttioctl,",
" ntyinput, nodev, nulldev, ttstart, nulldev, /* 1 */",
0
};
char *strl1[] =
{
"",
"/*",
" * Block I/O mode major device numbers",
" */",
"",
0
};
char *strl2[] =
{
"",
"/*",
" * Character mode major device numbers",
" */",
"",
0
};
char *strm[] =
{
"",
"/*",
" * I/O device CSR addresses",
" * Indexed by RAW major device number",
" */",
"",
"int\tio_csr[] =",
"{",
0
};
char *strm1[] =
{
"",
"/*",
" * I/O device bus addr ext. register offset.",
" * Zero if no BAE register. Index is BLOCK major dev.",
" */",
"",
"char io_bae[] =",
"{",
" 0, /* rk */",
" 0, /* rp */",
" 0, /* ra MBZ */",
" 010, /* rl */",
" 0, /* hx */",
" 0, /* tm */",
" 0, /* tk */",
" 0, /* ts */",
" 034, /* ht */",
" 050, /* hp */",
" 050, /* hm */",
" 050, /* hj */",
" 0, /* hk */",
" 0, /* u1 MBZ */",
" 0, /* u2 MBZ */",
" 0, /* u3 MBZ */",
" 0, /* u4 MBZ */",
"};",
0
};
char *strm2[] =
{
"",
"/*",
" * MSCP disk controller CSR and VECTOR addresses.",
" */",
"",
"#if NUDA > 0",
"int ra_csr[] = {C0_CSR, C1_CSR, C2_CSR, C3_CSR};",
"int ra_ivec[] = {C0_VEC, C1_VEC, C2_VEC, C3_VEC};",
"#else",
"int ra_csr[] = {0,0,0,0};",
"#endif",
"",
"/*",
" * TS magtape controller CSR and VECTOR addresses.",
" */",
"",
"#if NTS > 0",
"int ts_csr[] = {S0_CSR, S1_CSR, S2_CSR, S3_CSR};",
"#else",
"int ts_csr[] = {0,0,0,0};",
"#endif",
"",
"/*",
" * TMSCP magtape controller CSR and VECTOR addresses.",
" */",
"",
"#if NTK > 0",
"int tk_csr[] = {K0_CSR, K1_CSR, K2_CSR, K3_CSR};",
"int tk_ivec[] = {K0_VEC, K1_VEC, K2_VEC, K3_VEC};",
"#else",
"int tk_csr[] = {0,0,0,0};",
"#endif",
0
};
char strn[] =
{
" \n\
/*\n\
* Disk I/O instrumentation, see bio.c\n\
*/\n\
\n\
struct {\n\
int nbufr;\n\
long nread;\n\
long nreada;\n\
long ncache;\n\
long nwrite;\n"
};
char *stro[] =
{
"",
"/*",
" * Dummy unibus map support functions.",
" */",
"",
"int\tmapinit();",
"int\tmapalloc();",
"int\tmapfree();",
"",
"mapinit()",
"{",
"}",
"",
"mapalloc()",
"{",
"}",
"",
"mapfree()",
"{",
"}",
"",
0
};
char *strnofpe[] =
{
"",
"int fpemulation = 2;",
"",
"/*",
" * Dummy function required if floating point simulator",
" * is not used.",
" */",
"",
"fptrap()",
"{",
" return(SIGILL);",
"}",
"",
0
};
char *strfpe[] =
{
"",
"int fpemulation = 1;",
"",
0
};
char *strq[] =
{
"",
"/*",
" * Disk driver data structure sizes header file (dds.h).",
" * Controls number and size of disk data structures in",
" * (dds.c), for MSCP (ra.c) and MASSBUS (hp.c) disk drivers.",
" */",
"",
0
};
char *strgk[] =
{
"",
"int\tgeneric;\t/* generic kernel */",
"",
0
};
/*
* If the utsname structure is changed,
* check the code in the setpar() routine
* in /usr/sys/sas/boot.c. Boot loads the machine
* name into machine[] as PDP-11/##.
*/
char *strutsn[] =
{
"",
"/*",
" * Utsname definition",
" */",
"",
"#include <sys/utsname.h>",
"struct utsname utsname = {",
"\t{'U','L','T','R','I','X','-','1','1'},",
"\t{''},",
"\t{'3'},",
"\t{'0'},",
"\t{''},",
"};",
"",
0
};
char *strmausno[] =
{
"",
"/*",
" * Dummy maus routines and structures",
" */",
"#include <sys/maus.h>",
"maus()",
"{",
" nosys();",
"}",
"mausinit()",
"{",
" return(0);",
"}",
"long",
"mmoff()",
"{",
" u.u_error = ENXIO;",
" return(-1L);",
"}",
" ",
"struct mausmap mausmap[] = {",
" -1, -1",
"};",
"",
0
};
char *strsemno[] =
{
"",
"/*",
" * Dummy semaphore routines",
" */",
"semsys()",
"{",
" nosys();",
"}",
"seminit()",
"{",
"}",
"semexit()",
"{",
"}",
"",
0
};
char *strmsgno[] =
{
"",
"/*",
" * Dummy message routines",
" */",
"msgsys()",
"{",
" nosys();",
"}",
"msginit()",
"{",
" return(0);",
"}",
"",
0
};
char *strflckno[] =
{
"",
"/*",
" * Dummy record/file locking routines",
" */",
"flckinit()",
"{",
" return(0);",
"}",
"cleanlocks()",
"{",
" return(0);",
"}",
"setflck()",
"{",
" return(1);",
"}",
"getflck()",
"{",
" return(1);",
"}",
"",
0
};
char *strshuff[] =
{
"",
"/*",
" * Dummy shuffle routine",
" */",
"shuffle()",
"{",
" wakeup((caddr_t)&runlock);",
"}",
"",
0
};