Ultrix-3.1/src/cmd/uucp/uucp.h
/**********************************************************************
* Copyright (c) Digital Equipment Corporation 1984, 1985, 1986. *
* All Rights Reserved. *
* Reference "/usr/src/COPYRIGHT" for applicable restrictions. *
**********************************************************************/
/*
* SCCSID: @(#)uucp.h 3.0 4/22/86
*/
#include "stdio.h"
/*
* Determine local uucp name of this machine.
* Define one of the following:
*
* For UCB 4.1A and later systems, you will have the gethostname(2) call.
* If this call exists, define GETHOST.
*
* If your site has <whoami.h>, but you do not want to read
* that file every time uucp runs, you can compile sysname into uucp.
* This is faster and more reliable, but binaries do not port.
* If you want to do that, define CCWHOAMI.
*
* Some systems put the local uucp name in a single-line file
* named /etc/uucpname or /local/uucpname.
* If your site does that, define UUNAME.
*
* Systems running 3Com's UNET will have the getmyhname() call.
* If you want to, define GETMYHNAME.
*
* You should also define MYNANE to be your uucp name.
*
* For each of the above that are defined, uucp checks them in order.
* It stops on the first method that returns a non null name.
* If everything else fails, it uses "unknown" for the system name
* If yours is a BTL system III, IV, or so-on site,
* #define SYSIII. Conditional compilations should produce the right
* code, but if it doesn't (the compiler will probably complain loudly),
* make the needed adjustments and guard the code with
* #ifdef SYSIII, (code for system III), #else, (code for V7), #endif
*/
/* If your site is running V7M11 #define V7M11 */
/* If your site is running anything less than 4.1c BSD then the
* new directory calls must be simulated by installing the directory
* library and #define NDIR
*/
#ifdef V7M11
#define NDIR
#endif
/* define CCWHOAMI if <whoami.h> should be used by uucpname */
/* define GETHOST if gethostname() should be used to get uucpname */
#define GETHOST
/* define UUNAME if /etc/uucpname should be read to get uucpname */
/* Used by uucpname.c */
/* define UUDIR for uucp subdirectory code (recommended) */
#define UUDIR
/* define DATAKIT if datakit routine is available */
/* define DIALOUT if dialout routine is available */
/* define the last characters for ACU */
#define ACULAST "-<"
#ifdef VENTEL
/*
* We need a timer to write slowly to ventels.
* define INTERVALTIMER to use 4.2 bsd interval timer.
* define FASTTIMER if you have the nap() system call.
* define FTIME if you have the ftime() system call.
* define BUSYLOOP if you must do a busy loop.
* Look at uucpdelay() in condevs.c for details.
*/
#ifdef V7M11
#define BUSYLOOP
#else
#define FTIME
#endif
#endif
/* define the value of WFMASK - for umask call - used for all uucp work files */
#define WFMASK 0137
/* define the value of LOGMASK - for LOGFILE, SYSLOG, ERRLOG */
#define LOGMASK 0133
/* All files are given at least the following at the final destination */
/* It is also the default mode, so '666' is recommended */
/* and 444 is minimal (minimally useful, maximally annoying) */
#define BASEMODE 0666
/* define UUSTAT if you need "uustat" command */
/* define UUSUB if you need "uusub" command */
/* All users with getuid() <= PRIV_UIDS are 'privileged'. */
/* Was 10, reduced to 3 as suggested by duke!dbl (David Leonard) */
#define PRIV_UIDS 3
#define THISDIR "/usr/spool/uucp"
#define XQTDIR "/usr/spool/uucp/.XQTDIR"
#define SQFILE "/usr/spool/uucp/.SQFILE"
#define SQTMP "/usr/spool/uucp/.SQTMP"
#define SLCKTIME 5400 /* system/device timeout (LCK.. files) */
#define SEQFILE ".SEQF"
#define SYSFILE "/usr/lib/uucp/L.sys"
#define DEVFILE "/usr/lib/uucp/L-devices"
#define DIALFILE "/usr/lib/uucp/L-dialcodes"
#define USERFILE "/usr/lib/uucp/USERFILE"
#define CMDFILE "/usr/lib/uucp/L.cmds"
#define SPOOL "/usr/spool/uucp"
#define SQLOCK "/usr/spool/uucp/LCK.SQ"
#define SYSLOG "/usr/spool/uucp/SYSLOG"
#define PUBDIR "/usr/spool/uucppublic"
#define SEQLOCK "LCK.SEQL"
#define CMDPRE 'C'
#define DATAPRE 'D'
#define XQTPRE 'X'
#define LOGFILE "/usr/spool/uucp/LOGFILE"
#define ERRLOG "/usr/spool/uucp/ERRLOG"
#define RMTDEBUG "AUDIT"
#define SQTIME 60
#define TRYCALLS 2 /* number of tries to dial call */
/*define PROTODEBUG = 1 if testing protocol - introduce errors */
#define DEBUG(l, f, s) if (Debug >= l) fprintf(stderr, f, s); else
#define ASSERT(e, s1, s2, i1) if (!(e)) {\
assert(s1, s2, i1);\
cleanup(FAIL);} else
#define ASSERT2(e, s1, s2, i1) if (!(e)) {\
assert(s1, s2, i1);\
return(FAIL);\
} else
#define ASSERT_NOFAIL(e, s1, s2, i1) if (!(e)) {\
assert(s1, s2, i1);\
} else
#define SAME 0
#define ANYREAD 04
#define ANYWRITE 02
#define FAIL -1
#define SUCCESS 0
#define CNULL (char *) 0
#define STBNULL (struct sgttyb *) 0
#define MASTER 1
#define SLAVE 0
#define MAXFULLNAME 250
#define MAXMSGTIME 60
#define NAMESIZE 15
#define EOTMSG "\04\n\04\n"
#define CALLBACK 1
/* commands */
#define SHELL "/bin/sh"
#define MAIL "mail"
#define UUCICO "/usr/lib/uucp/uucico"
#define UUXQT "/usr/lib/uucp/uuxqt"
#define UUCP "uucp"
#define MAXPH 60 /* Maximum length of a phone number */
/* This structure tells how to get to a device */
struct condev {
char *CU_meth; /* method, such as 'ACU' or 'DIR' */
char *CU_brand; /* brand, such as 'Hayes' or 'Vadic' */
int (*CU_gen)(); /* what to call to search for brands */
int (*CU_open)(); /* what to call to open brand */
int (*CU_clos)(); /* what to call to close brand */
};
/* This structure tells about a device */
struct Devices {
char D_type[20];
char D_line[20];
char D_calldev[20];
char D_class[20];
int D_speed;
char D_brand[20]; /* brand name, as 'Hayes' or 'Vadic' */
};
/* call connect fail stuff */
#define CF_TIME -2
#define CF_LOCK -3
#define CF_NODEV -4
#define CF_DIAL -5
#define CF_LOGIN -6
#define CF_SYSTEM -9
#define CF_TRYANOTHER -99
#define F_NAME 0
#define F_TIME 1
#define F_LINE 2
#define F_CLASS 3 /* an optional prefix and speed */
#define F_PHONE 4
#define F_LOGIN 5
/* system status stuff */
#define SS_OK 0
#define SS_FAIL 4
#define SS_NODEVICE 1
#define SS_CALLBACK 2
#define SS_INPROGRESS 3
#define SS_BADSEQ 5
#define SS_BADLOGIN 8
#define SS_BADCONNECT 9 /* not used */
#define SS_COMPLETE 10 /* not used */
#define SS_HANDSHAKE 11
#define SS_CONN_OK 12
/* fail/retry parameters */
#define RETRYTIME 3300
#define MAXRECALLS 20
/* stuff for command execution */
#define X_RQDFILE 'F' /* file required before execution can begin */
#define X_STDIN 'I' /* file will be used as standard input */
#define X_STDOUT 'O' /* file will be used as standard output */
#define X_CMD 'C' /* command to be executed */
#define X_USER 'U' /* user on remote machine (previous hop) */
#define X_SENDFILE 'S' /* currently not used */
#define X_NONOTI 'N' /* do not return exit status */
#define X_NONZERO 'Z' /* return abnormal exit status, overrides
* X_NONOTI */
#define X_RETURNADDR 'R' /* return address e.g. C!B!A!user */
#define X_INPUT 'B' /* return input on abnormal exit */
#define X_LOCK "/usr/spool/uucp/LCK.XQT"
#define X_LOCKTIME 3600
#define WKDSIZE 100 /* size of work dir name */
extern int Ifn, Ofn;
extern char Rmtname[];
extern char User[];
extern char Loginuser[];
extern char *Thisdir;
extern char *Spool;
extern char Spoolname[];
extern char Seqlock[];
extern char Seqfile[];
extern char Myname[];
extern int Debug;
extern int Pkdebug;
extern int Pkdrvon;
extern int Bspeed;
extern char Wrkdir[];
extern long Retrytime;
extern short Usrf;
extern char Progname[];
extern int (*CU_end)();
extern struct condev condevs[];
#ifdef UUDIR
#define subfile(s) SubFile(s)
#define subdir(d, p) SubDir(d, p)
#define subchdir(d) SubChDir(d)
extern char DLocal[], DLocalX[], *SubFile(), *SubDir();
extern char *Dirlist[];
extern int Subdirs;
#define MAXDIRS 150
#else
#define subfile(s) s
#define subdir(d, p, r) d
#define subchdir(d) chdir(d)
#endif
/* Commonly called routines which return non-int value */
extern char *ttyname(), *strcpy(), *strcat(), *index(), *rindex(),
*fgets(), *calloc(), *malloc(),
*cfgets();
extern long lseek();