V10/cmd/gcc/cccp.c
/* C Compatible Compiler Preprocessor (CCCP)
Copyright (C) 1986, 1987, Free Software Foundation, Inc.
Written by Paul Rubin, June 1986
Adapted to ANSI C, Richard Stallman, Jan 1987
NO WARRANTY
BECAUSE THIS PROGRAM IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY
NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC,
RICHARD M. STALLMAN AND/OR OTHER PARTIES PROVIDE THIS PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.
STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., AND/OR ANY OTHER PARTY
WHO MAY MODIFY AND REDISTRIBUTE THIS PROGRAM AS PERMITTED BELOW, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY LOST PROFITS, LOST MONIES, OR
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR
DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) THIS
PROGRAM, EVEN IF YOU HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
GENERAL PUBLIC LICENSE TO COPY
1. You may copy and distribute verbatim copies of this source file
as you receive it, in any medium, provided that you conspicuously
and appropriately publish on each copy a valid copyright notice
"Copyright (C) 1987, Free Software Foundation"; and include
following the copyright notice a verbatim copy of the above disclaimer
of warranty and of this License. You may charge a distribution fee for the
physical act of transferring a copy.
2. You may modify your copy or copies of this source file or
any portion of it, and copy and distribute such modifications under
the terms of Paragraph 1 above, provided that you also do the following:
a) cause the modified files to carry prominent notices stating
that you changed the files and the date of any change; and
b) cause the whole of any work that you distribute or publish,
that in whole or in part contains or is a derivative of this
program or any part thereof, to be licensed at no charge to all
third parties on terms identical to those contained in this
License Agreement (except that you may choose to grant more extensive
warranty protection to some or all third parties, at your option).
c) You may charge a distribution fee for the physical act of
transferring a copy, and you may at your option offer warranty
protection in exchange for a fee.
Mere aggregation of another unrelated program with this program (or its
derivative) on a volume of a storage or distribution medium does not bring
the other program under the scope of these terms.
3. You may copy and distribute this program (or a portion or derivative
of it, under Paragraph 2) in object code or executable form under the terms
of Paragraphs 1 and 2 above provided that you also do one of the following:
a) accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of
Paragraphs 1 and 2 above; or,
b) accompany it with a written offer, valid for at least three
years, to give any third party free (except for a nominal
shipping charge) a complete machine-readable copy of the
corresponding source code, to be distributed under the terms of
Paragraphs 1 and 2 above; or,
c) accompany it with the information you received as to where the
corresponding source code may be obtained. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form alone.)
For an executable file, complete source code means all the source code for
all modules it contains; but, as a special exception, it need not include
source code for modules which are standard libraries that accompany the
operating system on which the executable file runs.
4. You may not copy, sublicense, distribute or transfer this program
except as expressly provided under this License Agreement. Any attempt
otherwise to copy, sublicense, distribute or transfer this program is void and
your rights to use the program under this License agreement shall be
automatically terminated. However, parties who have received computer
software programs from you with this License Agreement will not have
their licenses terminated so long as such parties remain in full compliance.
5. If you wish to incorporate parts of this program into other free
programs whose distribution conditions are different, write to the Free
Software Foundation at 675 Mass Ave, Cambridge, MA 02139. We have not yet
worked out a simple rule that can be stated here, but we will often permit
this. We will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of
software.
In other words, you are welcome to use, share and improve this program.
You are forbidden to forbid anyone else to use, share and improve
what you give them. Help stamp out software-hoarding! */
typedef unsigned char U_CHAR;
#ifdef EMACS
#define NO_SHORTNAMES
#include "../src/config.h"
#ifdef open
#undef open
#undef read
#undef write
#endif /* open */
#endif /* EMACS */
#ifndef EMACS
#include "config.h"
#endif /* not EMACS */
/* In case config.h defines these. */
#undef bcopy
#undef bzero
#undef bcmp
#include <sys/types.h>
#include <sys/stat.h>
#include <ctype.h>
#include <stdio.h>
#ifndef VMS
#include <sys/file.h>
#ifndef USG
#include <sys/time.h> /* for __DATE__ and __TIME__ */
#include <sys/resource.h>
#else
#define index strchr
#define rindex strrchr
#include <time.h>
#include <fcntl.h>
#endif /* USG */
#endif /* not VMS */
/* VMS-specific definitions */
#ifdef VMS
#include <time.h>
#include <errno.h> /* This defines "errno" properly */
#include <perror.h> /* This defines sys_errlist/sys_nerr properly */
#define O_RDONLY 0 /* Open arg for Read/Only */
#define O_WRONLY 1 /* Open arg for Write/Only */
#define read(fd,buf,size) VAX11_C_read(fd,buf,size)
#define write(fd,buf,size) VAX11_C_write(fd,buf,size)
#ifdef __GNUC__
#define BSTRING /* VMS/GCC supplies the bstring routines */
#endif __GNUC__
#endif /* VMS */
/* External declarations. */
void bcopy (), bzero ();
int bcmp ();
extern char version_string[];
/* Forward declarations. */
int do_define (), do_line (), do_include (), do_undef (), do_error (),
do_pragma (), do_if (), do_xifdef (), do_else (),
do_elif (), do_endif (), do_sccs ();
struct hashnode *install ();
struct hashnode *lookup ();
char *xmalloc (), *xrealloc (), *xcalloc ();
void fatal (), pfatal_with_name (), perror_with_name ();
int grow_outbuf ();
int handle_directive ();
void memory_full ();
U_CHAR *macarg1 ();
char *macarg ();
U_CHAR *skip_to_end_of_comment ();
U_CHAR *skip_quoted_string ();
#ifndef FATAL_EXIT_CODE
#define FATAL_EXIT_CODE 33 /* gnu cc command understands this */
#endif
#ifndef SUCCESS_EXIT_CODE
#define SUCCESS_EXIT_CODE 0 /* 0 means success on Unix. */
#endif
/* Name under which this program was invoked. */
char *progname;
/* Current maximum length of directory names in the search path
for include files. (Altered as we get more of them.) */
int max_include_len = sizeof("/usr/local/lib/gcc-include");
/* Nonzero means copy comments into the output file. */
int put_out_comments = 0;
/* Nonzero means don't process the ANSI trigraph sequences. */
int no_trigraphs = 0;
/* Nonzero means print the names of included files rather than
the preprocessed output. 1 means just the #include "...",
2 means #include <...> as well. */
int print_deps = 0;
/* Nonzero means don't output line number information. */
int no_line_commands;
/* Nonzero means inhibit output of the preprocessed text
and instead output the definitions of all user-defined macros
in a form suitable for use as input to cccp. */
int dump_macros;
/* Nonzero means give all the error messages the ANSI standard requires. */
int pedantic;
/* Nonzero means warn if slash-star appears in a comment. */
int warn_comments;
/* Nonzero means try to imitate old fashioned non-ANSI preprocessor. */
int traditional;
/* Nonzero causes output not to be done,
but directives such as #define that have side effects
are still obeyed. */
int no_output;
/* I/O buffer structure.
The `fname' field is nonzero for source files and #include files
and for the dummy text used for -D and -U.
It is zero for rescanning results of macro expansion
and for expanding macro arguments. */
#define INPUT_STACK_MAX 200
struct file_buf {
char *fname;
int lineno;
int length;
U_CHAR *buf;
U_CHAR *bufp;
/* Macro that this level is the expansion of.
Included so that we can reenable the macro
at the end of this level. */
struct hashnode *macro;
/* Value of if_stack at start of this file.
Used to prohibit unmatched #endif (etc) in an include file. */
struct if_stack *if_stack;
/* Object to be freed at end of input at this level. */
U_CHAR *free;
} instack[INPUT_STACK_MAX];
/* Current nesting level of input sources.
`instack[indepth]' is the level currently being read. */
int indepth = -1;
typedef struct file_buf FILE_BUF;
/* The output buffer. Its LENGTH field is the amount of room allocated
for the buffer, not the number of chars actually present. To get
that, subtract outbuf.buf from outbuf.bufp. */
#define OUTBUF_SIZE 10 /* initial size of output buffer */
FILE_BUF outbuf;
/* Grow output buffer OBUF points at
so it can hold at least NEEDED more chars. */
#define check_expand(OBUF, NEEDED) \
(((OBUF)->length - ((OBUF)->bufp - (OBUF)->buf) <= (NEEDED)) \
? grow_outbuf ((OBUF), (NEEDED)) : 0)
struct directory_stack
{
struct directory_stack *next;
char *fname;
};
/* #include "file" looks in source file dir, then stack. */
/* #include <file> just looks in the stack. */
/* -I directories are added to the end, then the defaults are added. */
struct directory_stack include_defaults[] =
{
#ifndef VMS
#ifdef CPLUSPLUS
/* Pick up GNU C++ specific include files. */
{ &include_defaults[1], "/usr/local/lib/g++-include" },
/* Borrow AT&T C++ head files, if available. */
{ &include_defaults[2], "/usr/include/CC" },
/* Use GNU CC specific header files. */
{ &include_defaults[3], "/usr/local/lib/gcc-include" },
#else
{ &include_defaults[1], "/usr/local/lib/gcc-include" },
#endif
{ 0, "/usr/include" }
#else
{ &include_defaults[1], "GNU_CC_INCLUDE:" }, /* GNU includes */
{ &include_defaults[2], "SYS$SYSROOT:[SYSLIB.]" }, /* VAX-11 "C" includes */
{ 0, "" }, /* This makes normal VMS filespecs work OK */
#endif /* VMS */
};
struct directory_stack *include = 0; /* First dir to search */
/* First dir to search for <file> */
struct directory_stack *first_bracket_include = 0;
struct directory_stack *last_include = 0; /* Last in chain */
/* Structure allocated for every #define. For a simple replacement
such as
#define foo bar ,
nargs = -1, the `pattern' list is null, and the expansion is just
the replacement text. Nargs = 0 means a functionlike macro with no args,
e.g.,
#define getchar() getc (stdin) .
When there are args, the expansion is the replacement text with the
args squashed out, and the reflist is a list describing how to
build the output from the input: e.g., "3 chars, then the 1st arg,
then 9 chars, then the 3rd arg, then 0 chars, then the 2nd arg".
The chars here come from the expansion. Whatever is left of the
expansion after the last arg-occurrence is copied after that arg.
Note that the reflist can be arbitrarily long---
its length depends on the number of times the arguments appear in
the replacement text, not how many args there are. Example:
#define f(x) x+x+x+x+x+x+x would have replacement text "++++++" and
pattern list
{ (0, 1), (1, 1), (1, 1), ..., (1, 1), NULL }
where (x, y) means (nchars, argno). */
typedef struct definition DEFINITION;
struct definition {
int nargs;
int length; /* length of expansion string */
U_CHAR *expansion;
struct reflist {
struct reflist *next;
char stringify; /* nonzero if this arg was preceded by a
# operator. */
char raw_before; /* Nonzero if a ## operator before arg. */
char raw_after; /* Nonzero if a ## operator after arg. */
int nchars; /* Number of literal chars to copy before
this arg occurrence. */
int argno; /* Number of arg to substitute (origin-0) */
} *pattern;
/* Names of macro args, concatenated in reverse order
with comma-space between them.
The only use of this is that we warn on redefinition
if this differs between the old and new definitions. */
U_CHAR *argnames;
};
/* different kinds of things that can appear in the value field
of a hash node. Actually, this may be useless now. */
union hashval {
int ival;
char *cpval;
DEFINITION *defn;
};
/* The structure of a node in the hash table. The hash table
has entries for all tokens defined by #define commands (type T_MACRO),
plus some special tokens like __LINE__ (these each have their own
type, and the appropriate code is run when that type of node is seen.
It does not contain control words like "#define", which are recognized
by a separate piece of code. */
/* different flavors of hash nodes --- also used in keyword table */
enum node_type {
T_DEFINE = 1, /* the `#define' keyword */
T_INCLUDE, /* the `#include' keyword */
T_IFDEF, /* the `#ifdef' keyword */
T_IFNDEF, /* the `#ifndef' keyword */
T_IF, /* the `#if' keyword */
T_ELSE, /* `#else' */
#if 0
/* cpp can pass #pragma through unchanged. */
T_PRAGMA, /* `#pragma' */
#endif
T_ELIF, /* `#else' */
T_UNDEF, /* `#undef' */
T_LINE, /* `#line' */
T_ERROR, /* `#error' */
T_ENDIF, /* `#endif' */
T_SCCS, /* `#sccs', used on system V. */
T_SPECLINE, /* special symbol `__LINE__' */
T_DATE, /* `__DATE__' */
T_FILE, /* `__FILE__' */
T_VERSION, /* `__VERSION__' */
T_TIME, /* `__TIME__' */
T_CONST, /* Constant value, used by `__STDC__' */
T_MACRO, /* macro defined by `#define' */
T_DISABLED, /* macro temporarily turned off for rescan */
T_SPEC_DEFINED, /* special `defined' macro for use in #if statements */
T_UNUSED /* Used for something not defined. */
};
struct hashnode {
struct hashnode *next; /* double links for easy deletion */
struct hashnode *prev;
struct hashnode **bucket_hdr; /* also, a back pointer to this node's hash
chain is kept, in case the node is the head
of the chain and gets deleted. */
enum node_type type; /* type of special token */
int length; /* length of token, for quick comparison */
U_CHAR *name; /* the actual name */
union hashval value; /* pointer to expansion, or whatever */
};
typedef struct hashnode HASHNODE;
/* Some definitions for the hash table. The hash function MUST be
computed as shown in hashf () below. That is because the rescan
loop computes the hash value `on the fly' for most tokens,
in order to avoid the overhead of a lot of procedure calls to
the hashf () function. Hashf () only exists for the sake of
politeness, for use when speed isn't so important. */
#define HASHSIZE 1403
HASHNODE *hashtab[HASHSIZE];
#define HASHSTEP(old, c) ((old << 2) + c)
#define MAKE_POS(v) (v & ~0x80000000) /* make number positive */
/* Symbols to predefine. */
#ifdef CPP_PREDEFINES
char *predefs = CPP_PREDEFINES;
#else
char *predefs = "";
#endif
/* `struct directive' defines one #-directive, including how to handle it. */
struct directive {
int length; /* Length of name */
int (*func)(); /* Function to handle directive */
char *name; /* Name of directive */
enum node_type type; /* Code which describes which directive. */
char angle_brackets; /* Nonzero => don't delete comments. */
};
/* Here is the actual list of #-directives, most-often-used first. */
struct directive directive_table[] = {
{ 6, do_define, "define", T_DEFINE},
{ 2, do_if, "if", T_IF},
{ 5, do_xifdef, "ifdef", T_IFDEF},
{ 6, do_xifdef, "ifndef", T_IFNDEF},
{ 5, do_endif, "endif", T_ENDIF},
{ 4, do_else, "else", T_ELSE},
{ 4, do_elif, "elif", T_ELIF},
{ 4, do_line, "line", T_LINE},
{ 7, do_include, "include", T_INCLUDE, 1},
{ 5, do_undef, "undef", T_UNDEF},
{ 5, do_error, "error", T_ERROR},
#ifdef SCCS_DIRECTIVE
{ 4, do_sccs, "sccs", T_SCCS},
#endif
#if 0
{ 6, do_pragma, "pragma", T_PRAGMA},
#endif
{ -1, 0, "", T_UNUSED},
};
/* table to tell if char can be part of a C identifier. */
U_CHAR is_idchar[256];
/* table to tell if char can be first char of a c identifier. */
U_CHAR is_idstart[256];
/* table to tell if c is horizontal space. */
U_CHAR is_hor_space[256];
/* table to tell if c is horizontal or vertical space. */
U_CHAR is_space[256];
#define SKIP_WHITE_SPACE(p) do { while (is_hor_space[*p]) p++; } while (0)
#define SKIP_ALL_WHITE_SPACE(p) do { while (is_space[*p]) p++; } while (0)
int errors = 0; /* Error counter for exit code */
/* Nonzero if have already warned about use of `$'. */
int dollar_seen = 0;
FILE_BUF expand_to_temp_buffer ();
DEFINITION *collect_expansion ();
/* Stack of conditionals currently in progress
(including both successful and failing conditionals). */
struct if_stack {
struct if_stack *next; /* for chaining to the next stack frame */
char *fname; /* copied from input when frame is made */
int lineno; /* similarly */
int if_succeeded; /* true if a leg of this if-group
has been passed through rescan */
enum node_type type; /* type of last directive seen in this group */
};
typedef struct if_stack IF_STACK_FRAME;
IF_STACK_FRAME *if_stack = NULL;
/* Buffer of -M output. */
char *deps_buffer;
/* Number of bytes allocated in above. */
int deps_allocated_size;
/* Number of bytes used. */
int deps_size;
/* Number of bytes since the last newline. */
int deps_column;
/* Nonzero means -I- has been seen,
so don't look for #include "foo" the source-file directory. */
int ignore_srcdir;
int
main (argc, argv)
int argc;
char **argv;
{
int st_mode;
long st_size;
char *in_fname, *out_fname;
int f, i;
FILE_BUF *fp;
char **pend_files = (char **) xmalloc (argc * sizeof (char *));
char **pend_defs = (char **) xmalloc (argc * sizeof (char *));
char **pend_undefs = (char **) xmalloc (argc * sizeof (char *));
int inhibit_predefs = 0;
int no_standard_includes = 0;
#ifdef RLIMIT_STACK
/* Get rid of any avoidable limit on stack size. */
{
struct rlimit rlim;
/* Set the stack limit huge so that alloca (particularly stringtab
* in dbxread.c) does not fail. */
getrlimit (RLIMIT_STACK, &rlim);
rlim.rlim_cur = rlim.rlim_max;
setrlimit (RLIMIT_STACK, &rlim);
}
#endif /* RLIMIT_STACK defined */
progname = argv[0];
in_fname = NULL;
out_fname = NULL;
initialize_random_junk ();
no_line_commands = 0;
no_trigraphs = 1;
dump_macros = 0;
no_output = 0;
bzero (pend_files, argc * sizeof (char *));
bzero (pend_defs, argc * sizeof (char *));
bzero (pend_undefs, argc * sizeof (char *));
/* Process switches and find input file name. */
for (i = 1; i < argc; i++) {
if (argv[i][0] != '-') {
if (out_fname != NULL)
fatal ("Usage: %s [switches] input output\n", argv[0]);
else if (in_fname != NULL) {
out_fname = argv[i];
if (! freopen (out_fname, "w", stdout))
pfatal_with_name (out_fname);
} else
in_fname = argv[i];
} else {
switch (argv[i][1]) {
case 'i':
if (argv[i][2] != 0)
pend_files[i] = argv[i] + 2;
else
pend_files[i] = argv[i+1], i++;
break;
case 'o':
if (out_fname != NULL)
fatal ("Output filename specified twice\n");
out_fname = argv[++i];
if (! freopen (out_fname, "w", stdout))
pfatal_with_name (out_fname);
break;
case 'p':
pedantic = 1;
break;
case 't':
traditional = 1;
break;
case 'W':
warn_comments = 1;
break;
case 'M':
if (!strcmp (argv[i], "-M"))
print_deps = 2;
else if (!strcmp (argv[i], "-MM"))
print_deps = 1;
deps_allocated_size = 200;
deps_buffer = (char *) xmalloc (deps_allocated_size);
deps_buffer[0] = 0;
deps_size = 0;
deps_column = 0;
break;
case 'd':
dump_macros = 1;
no_output = 1;
break;
case 'v':
{
fprintf (stderr, "GNU CPP version %s\n", version_string);
}
break;
case 'D':
{
char *p, *p1;
if (argv[i][2] != 0)
p = argv[i] + 2;
else
p = argv[++i];
if ((p1 = (char *) index (p, '=')) != NULL)
*p1 = ' ';
pend_defs[i] = p;
}
break;
case 'U': /* JF #undef something */
if (argv[i][2] != 0)
pend_undefs[i] = argv[i] + 2;
else
pend_undefs[i] = argv[i+1], i++;
break;
case 'C':
put_out_comments = 1;
break;
case 'E': /* -E comes from cc -E; ignore it. */
break;
case 'P':
no_line_commands = 1;
break;
case 'T': /* Enable ANSI trigraphs */
no_trigraphs = 0;
break;
case 'I': /* Add directory to path for includes. */
{
struct directory_stack *dirtmp;
if (! ignore_srcdir && !strcmp (argv[i] + 2, "-"))
ignore_srcdir;
else {
dirtmp = (struct directory_stack *)
xmalloc (sizeof (struct directory_stack));
dirtmp->next = 0; /* New one goes on the end */
if (include == 0)
include = dirtmp;
else
last_include->next = dirtmp;
last_include = dirtmp; /* Tail follows the last one */
if (argv[i][2] != 0)
dirtmp->fname = argv[i] + 2;
else
dirtmp->fname = argv[++i];
if (strlen (dirtmp->fname) > max_include_len)
max_include_len = strlen (dirtmp->fname);
if (ignore_srcdir && first_bracket_include == 0)
first_bracket_include = dirtmp;
}
}
break;
case 'n':
/* -nostdinc causes no default include directories.
You must specify all include-file directories with -I. */
no_standard_includes = 1;
break;
case 'u':
/* Sun compiler passes undocumented switch "-undef".
Let's assume it means to inhibit the predefined symbols. */
inhibit_predefs = 1;
break;
case '\0': /* JF handle '-' as file name meaning stdin or stdout */
if (in_fname == NULL) {
in_fname = "";
break;
} else if (out_fname == NULL) {
out_fname = "stdout";
break;
} /* else fall through into error */
default:
fatal ("Invalid option `%s'\n", argv[i]);
}
}
}
/* Do standard #defines that identify processor type. */
if (!inhibit_predefs) {
char *p = (char *) alloca (strlen (predefs) + 1);
strcpy (p, predefs);
while (*p) {
char *q;
if (p[0] != '-' || p[1] != 'D')
abort ();
q = &p[2];
while (*p && *p != ' ') p++;
if (*p != 0)
*p++= 0;
make_definition (q);
}
}
/* Do defines specified with -D. */
for (i = 1; i < argc; i++)
if (pend_defs[i])
make_definition (pend_defs[i]);
/* Do undefines specified with -U. */
for (i = 1; i < argc; i++)
if (pend_undefs[i])
make_undef (pend_undefs[i]);
/* Unless -fnostdinc,
tack on the standard include file dirs to the specified list */
if (!no_standard_includes) {
if (include == 0)
include = include_defaults;
else
last_include->next = include_defaults;
}
/* Initialize output buffer */
outbuf.buf = (U_CHAR *) xmalloc (OUTBUF_SIZE);
outbuf.bufp = outbuf.buf;
outbuf.length = OUTBUF_SIZE;
/* Scan the -i files before the main input.
Much like #including them, but with no_output set
so that only their macro definitions matter. */
no_output++;
for (i = 1; i < argc; i++)
if (pend_files[i]) {
int fd = open (pend_files[i], O_RDONLY, 0666);
if (fd < 0) {
perror_with_name (pend_files[i]);
return FATAL_EXIT_CODE;
}
finclude (fd, pend_files[i], &outbuf);
}
no_output--;
/* Create an input stack level for the main input file
and copy the entire contents of the file into it. */
fp = &instack[++indepth];
/* JF check for stdin */
if (in_fname == NULL || *in_fname == 0) {
in_fname = "";
f = 0;
} else if ((f = open (in_fname, O_RDONLY)) < 0)
goto perror;
/* For -M, print the expected object file name
as the target of this Make-rule. */
if (print_deps) {
if (*in_fname == 0)
deps_output ("-: ", 0);
else {
int len;
char *p = in_fname;
char *p1 = p;
/* Discard all directory prefixes from P. */
while (*p1)
{
if (*p1 == '/')
p = p1;
p1++;
}
/* Output P, but remove known suffixes. */
len = strlen (p);
if (p[len - 2] == '.' && p[len - 1] == 'c')
deps_output (p, len - 2);
else if (p[len - 3] == '.'
&& p[len - 2] == 'c'
&& p[len - 1] == 'c')
deps_output (p, len - 3);
else
deps_output (p, 0);
/* Supply our own suffix. */
deps_output (".o : ", 0);
deps_output (in_fname, 0);
deps_output (" ", 0);
}
}
file_size_and_mode (f, &st_mode, &st_size);
fp->fname = in_fname;
fp->lineno = 1;
/* JF all this is mine about reading pipes and ttys */
if ((st_mode & S_IFMT) != S_IFREG) {
/* Read input from a file that is not a normal disk file.
We cannot preallocate a buffer with the correct size,
so we must read in the file a piece at the time and make it bigger. */
int size;
int bsize;
int cnt;
U_CHAR *bufp;
bsize = 2000;
size = 0;
fp->buf = (U_CHAR *) xmalloc (bsize + 2);
bufp = fp->buf;
for (;;) {
cnt = read (f, bufp, bsize - size);
if (cnt < 0) goto perror; /* error! */
if (cnt == 0) break; /* End of file */
size += cnt;
bufp += cnt;
if (bsize == size) { /* Buffer is full! */
bsize *= 2;
fp->buf = (U_CHAR *) xrealloc (fp->buf, bsize + 2);
bufp = fp->buf + size; /* May have moved */
}
}
fp->length = size;
} else {
/* Read a file whose size we can determine in advance.
For the sake of VMS, st_size is just an upper bound. */
long i;
fp->length = 0;
fp->buf = (U_CHAR *) xmalloc (st_size + 2);
while (st_size > 0) {
i = read (f, fp->buf + fp->length, st_size);
if (i <= 0) {
if (i == 0) break;
goto perror;
}
fp->length += i;
st_size -= i;
}
}
fp->bufp = fp->buf;
fp->if_stack = if_stack;
/* Unless inhibited, convert trigraphs in the input. */
if (!no_trigraphs)
trigraph_pcp (fp);
/* Make sure data ends with a newline. And put a null after it. */
if (fp->length > 0 && fp->buf[fp->length-1] != '\n')
fp->buf[fp->length++] = '\n';
fp->buf[fp->length] = '\0';
output_line_command (fp, &outbuf, 0);
/* Scan the input, processing macros and directives. */
rescan (&outbuf, 0);
/* Now we have processed the entire input
Write whichever kind of output has been requested. */
if (dump_macros)
dump_all_macros ();
else if (print_deps)
puts (deps_buffer);
else if (write (fileno (stdout), outbuf.buf, outbuf.bufp - outbuf.buf) < 0)
fatal ("I/O error on output");
if (ferror (stdout))
fatal ("I/O error on output");
if (errors)
exit (FATAL_EXIT_CODE);
exit (SUCCESS_EXIT_CODE);
perror:
pfatal_with_name (in_fname);
}
/* Pre-C-Preprocessor to translate ANSI trigraph idiocy in BUF
before main CCCP processing. Name `pcp' is also in honor of the
drugs the trigraph designers must have been on.
Using an extra pass through the buffer takes a little extra time,
but is infinitely less hairy than trying to handle ??/" inside
strings, etc. everywhere, and also makes sure that trigraphs are
only translated in the top level of processing. */
trigraph_pcp (buf)
FILE_BUF *buf;
{
register U_CHAR c, *fptr, *bptr, *sptr;
int len;
fptr = bptr = sptr = buf->buf;
while ((sptr = (U_CHAR *) index (sptr, '?')) != NULL) {
if (*++sptr != '?')
continue;
switch (*++sptr) {
case '=':
c = '#';
break;
case '(':
c = '[';
break;
case '/':
c = '\\';
break;
case ')':
c = ']';
break;
case '\'':
c = '^';
break;
case '<':
c = '{';
break;
case '!':
c = '|';
break;
case '>':
c = '}';
break;
case '-':
c = '~';
break;
case '?':
sptr--;
continue;
default:
continue;
}
len = sptr - fptr - 2;
if (bptr != fptr && len > 0)
bcopy (fptr, bptr, len); /* BSD doc says bcopy () works right
for overlapping strings. In ANSI
C, this will be memmove (). */
bptr += len;
*bptr++ = c;
fptr = ++sptr;
}
len = buf->length - (fptr - buf->buf);
if (bptr != fptr && len > 0)
bcopy (fptr, bptr, len);
buf->length -= fptr - bptr;
buf->buf[buf->length] = '\0';
}
/* Move all backslash-newline pairs out of embarrassing places.
Exchange all such pairs following BP
with any potentially-embarrasing characters that follow them.
Potentially-embarrassing characters are / and *
(because a backslash-newline inside a comment delimiter
would cause it not to be recognized). */
newline_fix (bp)
U_CHAR *bp;
{
register U_CHAR *p = bp;
register int count = 0;
/* First count the backslash-newline pairs here. */
while (*p++ == '\\' && *p++ == '\n')
count++;
p = bp + count * 2;
/* What follows the backslash-newlines is not embarrassing. */
if (count == 0 || (*p != '/' && *p != '*'))
return;
/* Copy all potentially embarrassing characters
that follow the backslash-newline pairs
down to where the pairs originally started. */
while (*p == '*' || *p == '/')
*bp++ = *p++;
/* Now write the same number of pairs after the embarrassing chars. */
while (count-- > 0) {
*bp++ = '\\';
*bp++ = '\n';
}
}
/* Like newline_fix but for use within a directive-name.
Move any backslash-newlines up past any following symbol constituents. */
name_newline_fix (bp)
U_CHAR *bp;
{
register U_CHAR *p = bp;
register int count = 0;
/* First count the backslash-newline pairs here. */
while (*p++ == '\\' && *p++ == '\n')
count++;
p = bp + count * 2;
/* What follows the backslash-newlines is not embarrassing. */
if (count == 0 || !is_idchar[*p])
return;
/* Copy all potentially embarrassing characters
that follow the backslash-newline pairs
down to where the pairs originally started. */
while (is_idchar[*p])
*bp++ = *p++;
/* Now write the same number of pairs after the embarrassing chars. */
while (count-- > 0) {
*bp++ = '\\';
*bp++ = '\n';
}
}
/*
* The main loop of the program.
*
* Read characters from the input stack, transferring them to the
* output buffer OP.
*
* Macros are expanded and push levels on the input stack.
* At the end of such a level it is popped off and we keep reading.
* At the end of any other kind of level, we return.
* #-directives are handled, except within macros.
*
* If OUTPUT_MARKS is nonzero, keep Newline markers found in the input
* and insert them when appropriate. This is set while scanning macro
* arguments before substitution. It is zero when scanning for final output.
* There are three types of Newline markers:
* * Newline - follows a macro name that was not expanded
* because it appeared inside an expansion of the same macro.
* This marker prevents future expansion of that identifier.
* When the input is rescanned into the final output, these are deleted.
* These are also deleted by ## concatenation.
* * Newline Space (or Newline and any other whitespace character)
* stands for a place that tokens must be separated or whitespace
* is otherwise desirable, but where the ANSI standard specifies there
* is no whitespace. This marker turns into a Space (or whichever other
* whitespace char appears in the marker) in the final output,
* but it turns into nothing in an argument that is stringified with #.
* Such stringified arguments are the only place where the ANSI standard
* specifies with precision that whitespace may not appear.
*
* During this function, IP->bufp is kept cached in IBP for speed of access.
* Likewise, OP->bufp is kept in OBP. Before calling a subroutine
* IBP, IP and OBP must be copied back to memory. IP and IBP are
* copied back with the RECACHE macro. OBP must be copied back from OP->bufp
* explicitly, and before RECACHE, since RECACHE uses OBP.
*/
rescan (op, output_marks)
FILE_BUF *op;
int output_marks;
{
/* Character being scanned in main loop. */
register U_CHAR c;
/* Length of pending accumulated identifier. */
register int ident_length = 0;
/* Hash code of pending accumulated identifier. */
register int hash = 0;
/* Current input level (&instack[indepth]). */
FILE_BUF *ip;
/* Pointer for scanning input. */
register U_CHAR *ibp;
/* Pointer to end of input. End of scan is controlled by LIMIT. */
register U_CHAR *limit;
/* Pointer for storing output. */
register U_CHAR *obp;
/* REDO_CHAR is nonzero if we are processing an identifier
after backing up over the terminating character.
Sometimes we process an identifier without backing up over
the terminating character, if the terminating character
is not special. Backing up is done so that the terminating character
will be dispatched on again once the identifier is dealt with. */
int redo_char = 0;
/* 1 if within an identifier inside of which a concatenation
marker (Newline -) has been seen. */
int concatenated = 0;
/* While scanning a comment or a string constant,
this records the line it started on, for error messages. */
int start_line;
/* Record position of last `real' newline. */
U_CHAR *beg_of_line;
/* Pop the innermost input stack level, assuming it is a macro expansion. */
#define POPMACRO \
do { ip->macro->type = T_MACRO; \
if (ip->free) free (ip->free); \
--indepth; } while (0)
/* Reload `rescan's local variables that describe the current
level of the input stack. */
#define RECACHE \
do { ip = &instack[indepth]; \
ibp = ip->bufp; \
limit = ip->buf + ip->length; \
op->bufp = obp; \
check_expand (op, limit - ibp); \
beg_of_line = 0; \
obp = op->bufp; } while (0)
if (no_output && instack[indepth].fname != 0)
skip_if_group (&instack[indepth], 1);
obp = op->bufp;
RECACHE;
beg_of_line = ibp;
/* Our caller must always put a null after the end of
the input at each input stack level. */
if (*limit != 0)
abort ();
while (1) {
c = *ibp++;
*obp++ = c;
switch (c) {
case '\\':
if (ibp >= limit)
break;
if (*ibp == '\n') {
/* Always merge lines ending with backslash-newline,
even in middle of identifier. */
++ibp;
++ip->lineno;
--obp; /* remove backslash from obuf */
break;
}
/* Otherwise, backslash suppresses specialness of following char,
so copy it here to prevent the switch from seeing it.
But first get any pending identifier processed. */
if (ident_length > 0)
goto specialchar;
*obp++ = *ibp++;
break;
case '#':
/* If this is expanding a macro definition, don't recognize
preprocessor directives. */
if (ip->macro != 0)
goto randomchar;
if (ident_length)
goto specialchar;
/* # keyword: a # must be first nonblank char on the line */
if (beg_of_line == 0)
goto randomchar;
{
U_CHAR *bp;
/* Scan from start of line, skipping whitespace, comments
and backslash-newlines, and see if we reach this #.
If not, this # is not special. */
bp = beg_of_line;
while (1) {
if (is_hor_space[*bp])
bp++;
else if (*bp == '\\' && bp[1] == '\n')
bp += 2;
else if (*bp == '/' && bp[1] == '*') {
bp += 2;
while (!(*bp == '*' && bp[1] == '/'))
bp++;
bp += 2;
}
#ifdef CPLUSPLUS
else if (*bp == '/' && bp[1] == '/') {
bp += 2;
while (*bp++ != '\n') ;
}
#endif
else break;
}
if (bp + 1 != ibp)
goto randomchar;
}
/* This # can start a directive. */
--obp; /* Don't copy the '#' */
ip->bufp = ibp;
op->bufp = obp;
if (! handle_directive (ip, op)) {
/* Not a known directive: treat it as ordinary text.
IP, OP, IBP, etc. have not been changed. */
if (no_output && instack[indepth].fname) {
/* If not generating expanded output,
what we do with ordinary text is skip it.
Discard everything until next # directive. */
skip_if_group (&instack[indepth], 1);
RECACHE;
beg_of_line = ibp;
break;
}
++obp; /* Copy the '#' after all */
goto randomchar;
}
/* A # directive has been successfully processed. */
/* If not generating expanded output, ignore everything until
next # directive. */
if (no_output && instack[indepth].fname)
skip_if_group (&instack[indepth], 1);
obp = op->bufp;
RECACHE;
beg_of_line = ibp;
break;
case '\"': /* skip quoted string */
case '\'':
/* A single quoted string is treated like a double -- some
programs (e.g., troff) are perverse this way */
if (ident_length)
goto specialchar;
start_line = ip->lineno;
/* Skip ahead to a matching quote. */
while (1) {
if (ibp >= limit)
{
error_with_line (line_for_error (start_line),
"unterminated string constant");
break;
}
*obp++ = *ibp;
switch (*ibp++) {
case '\n':
++ip->lineno;
++op->lineno;
break;
case '\\':
if (ibp >= limit)
break;
if (*ibp == '\n')
{
/* Backslash newline is replaced by nothing at all,
but keep the line counts correct. */
--obp;
++ibp;
++ip->lineno;
}
else {
/* ANSI stupidly requires that in \\ the second \
is *not* prevented from combining with a newline. */
while (*ibp == '\\' && ibp[1] == '\n') {
ibp += 2;
++ip->lineno;
}
*obp++ = *ibp++;
}
break;
case '\"':
case '\'':
if (ibp[-1] == c)
goto while2end;
break;
}
}
while2end:
break;
case '/':
if (*ibp == '\\' && ibp[1] == '\n')
newline_fix (ibp);
#ifdef CPLUSPLUS
if (*ibp == '/')
{
/* C++ style comment... */
start_line = ip->lineno;
--ibp; /* Back over the slash */
--obp;
/* Comments are equivalent to spaces. */
if (! put_out_comments)
*obp++ = ' ';
else {
/* must fake up a comment here */
*obp++ = '/';
*obp++ = '/';
}
{
U_CHAR *before_bp = ibp+2;
while (ibp < limit) {
if (*ibp++ == '\n') {
ibp--;
if (put_out_comments) {
bcopy (before_bp, obp, ibp - before_bp);
obp += ibp - before_bp;
}
break;
}
}
break;
}
}
#endif
if (*ibp != '*')
goto randomchar;
if (ip->macro != 0)
goto randomchar;
if (ident_length)
goto specialchar;
/* We have a comment. Skip it, optionally copying it to output. */
start_line = ip->lineno;
++ibp; /* Skip the star. */
/* Comments are equivalent to spaces.
Note that we already output the slash; we might not want it.
For -traditional, a comment is equivalent to nothing. */
if (! put_out_comments)
{
if (traditional)
obp--;
else
obp[-1] = ' ';
}
else
*obp++ = '*';
{
U_CHAR *before_bp = ibp;
while (ibp < limit) {
switch (*ibp++) {
case '/':
if (warn_comments && ibp < limit && *ibp == '*')
warning("`/*' within comment");
break;
case '*':
if (*ibp == '\\' && ibp[1] == '\n')
newline_fix (ibp);
if (ibp >= limit || *ibp == '/')
goto comment_end;
break;
case '\n':
++ip->lineno;
/* Copy the newline into the output buffer, in order to
avoid the pain of a #line every time a multiline comment
is seen. */
if (!put_out_comments)
*obp++ = '\n';
++op->lineno;
}
}
comment_end:
if (ibp >= limit)
error_with_line (line_for_error (start_line),
"unterminated comment");
else {
ibp++;
if (put_out_comments) {
bcopy (before_bp, obp, ibp - before_bp);
obp += ibp - before_bp;
}
}
}
break;
case '$':
if (pedantic)
{
if (! dollar_seen)
warning ("ANSI C forbids `$' in identifier (first use here)");
dollar_seen = 1;
}
goto letter;
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
/* If digit is not part of identifier, it starts a number,
which means that following letters are not an identifier.
"0x5" does not refer to an identifier "x5".
So copy all alphanumerics that follow without accumulating
as an identifier. Periods also, for sake of "3.e7". */
if (ident_length == 0) {
while (ibp < limit) {
c = *ibp++;
if (!isalnum (c) && c != '.') {
--ibp;
break;
}
*obp++ = c;
}
break;
}
/* fall through */
case '_':
case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
case 'g': case 'h': case 'i': case 'j': case 'k': case 'l':
case 'm': case 'n': case 'o': case 'p': case 'q': case 'r':
case 's': case 't': case 'u': case 'v': case 'w': case 'x':
case 'y': case 'z':
case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
case 'Y': case 'Z':
letter:
ident_length++;
/* Compute step of hash function, to avoid a proc call on every token */
hash = HASHSTEP (hash, c);
break;
case '\n':
/* If reprocessing a macro expansion, newline is a special marker. */
if (ip->macro != 0) {
/* Newline White is a "funny space" to separate tokens that are
supposed to be separate but without space between.
Here While means any horizontal whitespace character.
Newline - marks a recursive macro use that is not
supposed to be expandable. */
if (*ibp == '-') {
/* Newline - inhibits expansion of preceding token.
If expanding a macro arg, we keep the newline -.
In final output, it is deleted. */
if (! concatenated) {
ident_length = 0;
hash = 0;
}
ibp++;
if (!output_marks) {
obp--;
} else {
/* If expanding a macro arg, keep the newline -. */
*obp++ = '-';
}
} else if (is_space[*ibp]) {
/* Newline Space does not prevent expansion of preceding token
so expand the preceding token and then come back. */
if (ident_length > 0)
goto specialchar;
/* If generating final output, newline space makes a space. */
if (!output_marks) {
obp[-1] = *ibp++;
/* And Newline Newline makes a newline, so count it. */
if (obp[-1] == '\n')
op->lineno++;
} else {
/* If expanding a macro arg, keep the newline space.
If the arg gets stringified, newline space makes nothing. */
*obp++ = *ibp++;
}
} else abort (); /* Newline followed by something random? */
break;
}
/* If there is a pending identifier, handle it and come back here. */
if (ident_length > 0)
goto specialchar;
beg_of_line = ibp;
/* Update the line counts and output a #line if necessary. */
++ip->lineno;
++op->lineno;
if (ip->lineno != op->lineno) {
op->bufp = obp;
output_line_command (ip, op, 1);
check_expand (op, ip->length - (ip->bufp - ip->buf));
obp = op->bufp;
}
break;
/* Come here either after (1) a null character that is part of the input
or (2) at the end of the input, because there is a null there. */
case 0:
if (ibp <= limit)
/* Our input really contains a null character. */
goto randomchar;
/* At end of a macro-expansion level, pop it and read next level. */
if (ip->macro != 0) {
obp--;
ibp--;
POPMACRO;
RECACHE;
break;
}
/* If we don't have a pending identifier,
return at end of input. */
if (ident_length == 0)
{
obp--;
ibp--;
op->bufp = obp;
ip->bufp = ibp;
goto ending;
}
/* If we do have a pending identifier, just consider this null
a special character and arrange to dispatch on it again.
The second time, IDENT_LENGTH will be zero so we will return. */
/* Fall through */
specialchar:
/* Handle the case of a character such as /, ', " or null
seen following an identifier. Back over it so that
after the identifier is processed the special char
will be dispatched on again. */
ibp--;
obp--;
redo_char = 1;
default:
randomchar:
if (ident_length > 0) {
register HASHNODE *hp;
/* We have just seen an identifier end. If it's a macro, expand it.
IDENT_LENGTH is the length of the identifier
and HASH is its hash code.
The identifier has already been copied to the output,
so if it is a macro we must remove it.
If REDO_CHAR is 0, the char that terminated the identifier
has been skipped in the output and the input.
OBP-IDENT_LENGTH-1 points to the identifier.
If the identifier is a macro, we must back over the terminator.
If REDO_CHAR is 1, the terminating char has already been
backed over. OBP-IDENT_LENGTH points to the identifier. */
for (hp = hashtab[MAKE_POS (hash) % HASHSIZE]; hp != NULL;
hp = hp->next) {
if (hp->length == ident_length) {
U_CHAR *obufp_before_macroname;
int op_lineno_before_macroname;
register int i = ident_length;
register U_CHAR *p = hp->name;
register U_CHAR *q = obp - i;
int disabled;
if (! redo_char)
q--;
do { /* All this to avoid a strncmp () */
if (*p++ != *q++)
goto hashcollision;
} while (--i);
/* We found a use of a macro name.
see if the context shows it is a macro call. */
/* Back up over terminating character if not already done. */
if (! redo_char)
{
ibp--;
obp--;
}
obufp_before_macroname = obp - ident_length;
op_lineno_before_macroname = op->lineno;
/* Record whether the macro is disabled. */
disabled = hp->type == T_DISABLED;
/* This looks like a macro ref, but if the macro was disabled,
just copy its name and put in a marker if requested. */
if (disabled)
{
if (output_marks) {
check_expand (op, limit - ibp + 2);
*obp++ = '\n';
*obp++ = '-';
}
break;
}
/* If macro wants an arglist, verify that a '(' follows.
first skip all whitespace, copying it to the output
after the macro name. Then, if there is no '(',
decide this is not a macro call and leave things that way. */
if ((hp->type == T_MACRO || hp->type == T_DISABLED)
&& hp->value.defn->nargs >= 0)
{
while (1) {
/* Scan forward over whitespace, copying it to the output. */
if (ibp == limit && ip->macro != 0) {
POPMACRO;
RECACHE;
}
else if (is_space[*ibp]) {
*obp++ = *ibp++;
if (ibp[-1] == '\n')
{
if (ip->macro == 0) {
/* Newline in a file. Count it. */
++ip->lineno;
++op->lineno;
} else if (!output_marks) {
/* A newline mark, and we don't want marks
in the output. If it is newline-hyphen,
discard it entirely. Otherwise, it is
newline-whitechar, so keep the whitechar. */
obp--;
if (*ibp == '-')
ibp++;
else {
if (*ibp == '\n')
++op->lineno;
*obp++ = *ibp++;
}
} else {
/* A newline mark; copy both chars to the output. */
*obp++ = *ibp++;
}
}
}
else break;
}
if (*ibp != '(')
break;
}
/* This is now known to be a macro call.
Discard the macro name from the output,
along with any following whitespace just copied. */
obp = obufp_before_macroname;
op->lineno = op_lineno_before_macroname;
/* Expand the macro, reading arguments as needed,
and push the expansion on the input stack. */
ip->bufp = ibp;
op->bufp = obp;
macroexpand (hp, op);
/* Reexamine input stack, since macroexpand has pushed
a new level on it. */
obp = op->bufp;
RECACHE;
break;
}
hashcollision:
;
} /* End hash-table-search loop */
ident_length = hash = 0; /* Stop collecting identifier */
redo_char = 0;
concatenated = 0;
} /* End if (ident_length > 0) */
} /* End switch */
} /* End per-char loop */
/* Come here to return -- but first give an error message
if there was an unterminated successful conditional. */
ending:
if (if_stack != ip->if_stack) {
char *str;
switch (if_stack->type) {
case T_IF:
str = "if";
break;
case T_IFDEF:
str = "ifdef";
break;
case T_IFNDEF:
str = "ifndef";
break;
case T_ELSE:
str = "else";
break;
case T_ELIF:
str = "elif";
break;
}
error_with_line (line_for_error (if_stack->lineno),
"unterminated #%s conditional", str);
}
if_stack = ip->if_stack;
}
/*
* Rescan a string into a temporary buffer and return the result
* as a FILE_BUF. Note this function returns a struct, not a pointer.
*
* OUTPUT_MARKS nonzero means keep Newline markers found in the input
* and insert such markers when appropriate. See `rescan' for details.
* OUTPUT_MARKS is 1 for macroexpanding a macro argument separately
* before substitution; it is 0 for other uses.
*/
static FILE_BUF
expand_to_temp_buffer (buf, limit, output_marks)
U_CHAR *buf, *limit;
int output_marks;
{
register FILE_BUF *ip;
FILE_BUF obuf;
int length = limit - buf;
U_CHAR *buf1;
int odepth = indepth;
if (length < 0)
abort ();
/* Set up the input on the input stack. */
buf1 = (U_CHAR *) alloca (length + 1);
{
register U_CHAR *p1 = buf;
register U_CHAR *p2 = buf1;
while (p1 != limit)
*p2++ = *p1++;
}
buf1[length] = 0;
++indepth;
ip = &instack[indepth];
ip->fname = 0;
ip->macro = 0;
ip->free = 0;
ip->length = length;
ip->buf = ip->bufp = buf1;
ip->if_stack = if_stack;
/* Set up to receive the output. */
obuf.length = length * 2 + 100; /* Usually enough. Why be stingy? */
obuf.bufp = obuf.buf = (U_CHAR *) xmalloc (obuf.length);
obuf.fname = 0;
obuf.macro = 0;
obuf.free = 0;
ip->lineno = obuf.lineno = 1;
/* Scan the input, create the output. */
rescan (&obuf, output_marks);
/* Pop input stack to original state. */
--indepth;
if (indepth != odepth)
abort ();
/* Record the output. */
obuf.length = obuf.bufp - obuf.buf;
return obuf;
}
/*
* Process a # directive. Expects IP->bufp to point to the '#', as in
* `#define foo bar'. Passes to the command handler
* (do_define, do_include, etc.): the addresses of the 1st and
* last chars of the command (starting immediately after the #
* keyword), plus op and the keyword table pointer. If the command
* contains comments it is copied into a temporary buffer sans comments
* and the temporary buffer is passed to the command handler instead.
* Likewise for backslash-newlines.
*
* Returns nonzero if this was a known # directive.
* Otherwise, returns zero, without advancing the input pointer.
*/
int
handle_directive (ip, op)
FILE_BUF *ip, *op;
{
register U_CHAR *bp, *cp;
register struct directive *kt;
register int ident_length;
U_CHAR *resume_p;
/* Nonzero means we must copy the entire command
to get rid of comments or backslash-newlines. */
int copy_command = 0;
U_CHAR *ident, *after_ident;
bp = ip->bufp;
/* Skip whitespace and \-newline. */
while (1) {
if (is_hor_space[*bp])
bp++;
else if (*bp == '\\' && bp[1] == '\n') {
bp += 2; ip->lineno++;
} else break;
}
/* Now find end of directive name.
If we encounter a backslash-newline, exchange it with any following
symbol-constituents so that we end up with a contiguous name. */
cp = bp;
while (1) {
if (is_idchar[*cp])
cp++;
else {
if (*cp == '\\' && cp[1] == '\n')
name_newline_fix (cp);
if (is_idchar[*cp])
cp++;
else break;
}
}
ident_length = cp - bp;
ident = bp;
after_ident = cp;
/*
* Decode the keyword and call the appropriate expansion
* routine, after moving the input pointer up to the next line.
*/
for (kt = directive_table; kt->length > 0; kt++) {
if (kt->length == ident_length && !strncmp (kt->name, ident, ident_length)) {
register U_CHAR *buf;
register U_CHAR *limit = ip->buf + ip->length;
int unterminated = 0;
/* Find the end of this command (first newline not backslashed
and not in a string or comment).
Set COPY_COMMAND if the command must be copied
(it contains a backslash-newline or a comment). */
buf = bp = after_ident;
while (bp < limit) {
register U_CHAR c = *bp++;
switch (c) {
case '\\':
if (bp < limit) {
if (*bp == '\n')
{
ip->lineno++;
copy_command = 1;
}
bp++;
}
break;
case '\'':
case '\"':
bp = skip_quoted_string (bp - 1, limit, ip->lineno, &ip->lineno, ©_command, &unterminated);
/* Don't bother calling the directive if we already got an error
message due to unterminated string. Skip everything and pretend
we called the directive. */
if (unterminated) {
ip->bufp = bp;
return 1;
}
break;
/* <...> is special for #include. */
case '<':
if (!kt->angle_brackets)
break;
while (*bp && *bp != '>') bp++;
break;
case '/':
if (*bp == '\\' && bp[1] == '\n')
newline_fix (bp);
if (*bp == '*'
#ifdef CPLUSPLUS
|| *bp == '/'
#endif
) {
U_CHAR *obp = bp - 1;
ip->bufp = bp + 1;
skip_to_end_of_comment (ip, &ip->lineno);
bp = ip->bufp;
/* No need to copy the command because of a comment at the end;
just don't include the comment in the directive. */
if (bp == limit || *bp == '\n') {
bp = obp;
goto endloop1;
}
copy_command++;
}
break;
case '\n':
--bp; /* Point to the newline */
ip->bufp = bp;
goto endloop1;
}
}
ip->bufp = bp;
endloop1:
resume_p = ip->bufp;
/* BP is the end of the directive.
RESUME_P is the next interesting data after the directive.
A comment may come between. */
if (copy_command) {
register U_CHAR *xp = buf;
/* Need to copy entire command into temp buffer before dispatching */
cp = (U_CHAR *) alloca (bp - buf + 5); /* room for cmd plus
some slop */
buf = cp;
/* Copy to the new buffer, deleting comments
and backslash-newlines (and whitespace surrounding the latter). */
while (xp < bp) {
register U_CHAR c = *xp++;
*cp++ = c;
switch (c) {
case '\n':
break;
/* <...> is special for #include. */
case '<':
if (!kt->angle_brackets)
break;
while (*bp && *bp != '>') bp++;
break;
case '\\':
if (*xp == '\n') {
xp++;
cp--;
if (cp != buf && is_space[cp[-1]]) {
while (cp != buf && is_space[cp[-1]]) cp--;
cp++;
SKIP_WHITE_SPACE (xp);
} else if (is_space[*xp]) {
*cp++ = *xp++;
SKIP_WHITE_SPACE (xp);
}
}
break;
case '\'':
case '\"':
{
register U_CHAR *bp1
= skip_quoted_string (xp - 1, limit, ip->lineno, 0, 0, 0);
while (xp != bp1)
*cp++ = *xp++;
}
break;
case '/':
if (*xp == '*'
#ifdef CPLUSPLUS
|| *xp == '/'
#endif
) {
if (traditional)
cp--;
else
cp[-1] = ' ';
ip->bufp = xp + 1;
skip_to_end_of_comment (ip, 0);
xp = ip->bufp;
}
}
}
/* Null-terminate the copy. */
*cp = 0;
}
else
cp = bp;
ip->bufp = resume_p;
/* Call the appropriate command handler. buf now points to
either the appropriate place in the input buffer, or to
the temp buffer if it was necessary to make one. cp
points to the first char after the contents of the (possibly
copied) command, in either case. */
(*kt->func) (buf, cp, op, kt);
check_expand (op, ip->length - (ip->bufp - ip->buf));
return 1;
}
}
return 0;
}
static char *monthnames[] = {"jan", "feb", "mar", "apr", "may", "jun",
"jul", "aug", "sep", "oct", "nov", "dec",
};
/*
* expand things like __FILE__. Place the expansion into the output
* buffer *without* rescanning.
*/
special_symbol (hp, op)
HASHNODE *hp;
FILE_BUF *op;
{
char *buf;
int i, len;
FILE_BUF *ip = NULL;
static struct tm *timebuf = NULL;
struct tm *localtime ();
int paren = 0; /* For special `defined' keyword */
for (i = indepth; i >= 0; i--)
if (instack[i].fname != NULL) {
ip = &instack[i];
break;
}
if (ip == NULL) {
error ("cccp error: not in any file?!");
return; /* the show must go on */
}
switch (hp->type) {
case T_FILE:
buf = (char *) alloca (3 + strlen (ip->fname));
sprintf (buf, "\"%s\"", ip->fname);
break;
case T_VERSION:
buf = (char *) alloca (3 + strlen (version_string));
sprintf (buf, "\"%s\"", version_string);
break;
case T_CONST:
buf = (char *) alloca (4 * sizeof (int));
sprintf (buf, "%d", hp->value.ival);
break;
case T_SPECLINE:
buf = (char *) alloca (10);
sprintf (buf, "%d", ip->lineno);
break;
case T_DATE:
case T_TIME:
if (timebuf == NULL) {
i = time (0);
timebuf = localtime (&i);
}
buf = (char *) alloca (20);
if (hp->type == T_DATE)
sprintf (buf, "\"%s %2d %4d\"", monthnames[timebuf->tm_mon],
timebuf->tm_mday, timebuf->tm_year + 1900);
else
sprintf (buf, "\"%02d:%02d:%02d\"", timebuf->tm_hour, timebuf->tm_min,
timebuf->tm_sec);
break;
case T_SPEC_DEFINED:
buf = " 0 "; /* Assume symbol is not defined */
ip = &instack[indepth];
SKIP_WHITE_SPACE (ip->bufp);
if (*ip->bufp == '(') {
paren++;
ip->bufp++; /* Skip over the paren */
SKIP_WHITE_SPACE (ip->bufp);
}
if (!is_idstart[*ip->bufp])
goto oops;
if (lookup (ip->bufp, -1, -1))
buf = " 1 ";
while (is_idchar[*ip->bufp])
++ip->bufp;
SKIP_WHITE_SPACE (ip->bufp);
if (paren) {
if (*ip->bufp != ')')
goto oops;
++ip->bufp;
}
break;
oops:
error ("`defined' must be followed by ident or (ident)");
break;
default:
error ("cccp error: invalid special hash type"); /* time for gdb */
abort ();
}
len = strlen (buf);
check_expand (op, len);
bcopy (buf, op->bufp, len);
op->bufp += len;
return;
}
/* Routines to handle #directives */
/*
* Process include file by reading it in and calling rescan.
* Expects to see "fname" or <fname> on the input.
*/
do_include (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
char *fname; /* Dynamically allocated fname buffer */
U_CHAR *fbeg, *fend; /* Beginning and end of fname */
struct directory_stack *stackp = include; /* Chain of dirs to search */
struct directory_stack dsp[1]; /* First in chain, if #include "..." */
int flen;
int f; /* file number */
int retried = 0; /* Have already tried macro
expanding the include line*/
FILE_BUF trybuf; /* It got expanded into here */
int system_header_p = 0; /* 0 for "...", 1 for <...> */
f= -1; /* JF we iz paranoid! */
get_filename:
fbeg = buf;
SKIP_WHITE_SPACE (fbeg);
/* Discard trailing whitespace so we can easily see
if we have parsed all the significant chars we were given. */
while (limit != fbeg && is_hor_space[limit[-1]]) limit--;
switch (*fbeg++) {
case '\"':
fend = fbeg;
while (fend != limit && *fend != '\"')
fend++;
if (*fend == '\"' && fend + 1 == limit) {
FILE_BUF *fp;
/* We have "filename". Figure out directory this source
file is coming from and put it on the front of the list. */
/* If -I- was specified, don't search current dir, only spec'd ones. */
if (ignore_srcdir) break;
for (fp = &instack[indepth]; fp >= instack; fp--)
{
int n;
char *ep,*nam;
extern char *rindex ();
if ((nam = fp->fname) != NULL)
{
/* Found a named file. Figure out dir of the file,
and put it in front of the search list. */
dsp[0].next = stackp;
stackp = dsp;
#ifndef VMS
ep = rindex (nam, '/');
#else /* VMS */
ep = rindex (nam, ']');
if (ep == NULL) ep = rindex (nam, '>');
if (ep == NULL) ep = rindex (nam, ':');
if (ep != NULL) ep++;
#endif /* VMS */
if (ep != NULL) {
n = ep - nam;
dsp[0].fname = (char *) alloca (n + 1);
strncpy (dsp[0].fname, nam, n);
dsp[0].fname[n] = '\0';
if (n > max_include_len) max_include_len = n;
} else {
dsp[0].fname = 0; /* Current directory */
}
break;
}
}
break;
}
goto fail;
case '<':
fend = fbeg;
while (fend != limit && *fend != '>') fend++;
if (*fend == '>' && fend + 1 == limit) {
system_header_p = 1;
/* If -I-, start with the first -I dir after the -I-. */
if (first_bracket_include)
stackp = first_bracket_include;
break;
}
goto fail;
default:
fail:
if (retried) {
error ("#include expects \"fname\" or <fname>");
return;
} else {
trybuf = expand_to_temp_buffer (buf, limit, 0);
buf = (U_CHAR *) alloca (trybuf.bufp - trybuf.buf + 1);
bcopy (trybuf.buf, buf, trybuf.bufp - trybuf.buf);
limit = buf + (trybuf.bufp - trybuf.buf);
free (trybuf.buf);
retried++;
goto get_filename;
}
}
flen = fend - fbeg;
fname = (char *) alloca (max_include_len + flen + 2);
/* + 2 above for slash and terminating null. */
/* If specified file name is absolute, just open it. */
if (*fbeg == '/') {
strncpy (fname, fbeg, flen);
fname[flen] = 0;
f = open (fname, O_RDONLY);
} else {
/* Search directory path, trying to open the file.
Copy each filename tried into FNAME. */
for (; stackp; stackp = stackp->next) {
if (stackp->fname) {
strcpy (fname, stackp->fname);
strcat (fname, "/");
fname[strlen (fname) + flen] = 0;
} else {
fname[0] = 0;
}
strncat (fname, fbeg, flen);
#ifdef VMS
/* Change this 1/2 Unix 1/2 VMS file specification into a
full VMS file specification */
if (stackp->fname && (stackp->fname[0] != 0)) {
/* Fix up the filename */
hack_vms_include_specification (fname);
} else {
/* This is a normal VMS filespec, so use it unchanged. */
strncpy (fname, fbeg, flen);
fname[flen] = 0;
}
#endif /* VMS */
if ((f = open (fname, O_RDONLY)) >= 0)
break;
}
}
/* For -M, print the name of the included file. */
if (print_deps > system_header_p)
{
deps_output (fname, strlen (fname));
deps_output (" ", 0);
}
if (f < 0) {
strncpy (fname, fbeg, flen);
fname[flen] = 0;
error ("can't find include file `%s'", fname);
} else {
finclude (f, fname, op);
close (f);
}
}
/* Process the contents of include file FNAME, already open on descriptor F,
with output to OP. */
finclude (f, fname, op)
int f;
char *fname;
FILE_BUF *op;
{
long st_size;
long i;
FILE_BUF *fp; /* For input stack frame */
int success = 0;
if (file_size_and_mode (f, (int *)0, &st_size) < 0)
goto nope; /* Impossible? */
fp = &instack[indepth + 1];
bzero (fp, sizeof (FILE_BUF));
fp->buf = (U_CHAR *) alloca (st_size + 2);
fp->fname = fname;
fp->length = 0;
fp->lineno = 1;
fp->bufp = fp->buf;
fp->if_stack = if_stack;
/* Read the file contents, knowing that st_size is an upper bound
on the number of bytes we can read. */
while (st_size > 0) {
i = read (f, fp->buf + fp->length, st_size);
if (i <= 0) {
if (i == 0) break;
goto nope;
}
fp->length += i;
st_size -= i;
}
if (!no_trigraphs)
trigraph_pcp (fp);
if (fp->length > 0 && fp->buf[fp->length-1] != '\n')
fp->buf[fp->length++] = '\n';
fp->buf[fp->length] = '\0';
success = 1;
indepth++;
output_line_command (fp, op, 0);
rescan (op, 0);
indepth--;
output_line_command (&instack[indepth], op, 0);
nope:
close (f);
if (!success) {
perror_with_name (fname);
}
}
/* The arglist structure is built by do_define to tell
collect_definition where the argument names begin. That
is, for a define like "#define f(x,y,z) foo+x-bar*y", the arglist
would contain pointers to the strings x, y, and z.
Collect_definition would then build a DEFINITION node,
with reflist nodes pointing to the places x, y, and z had
appeared. So the arglist is just convenience data passed
between these two routines. It is not kept around after
the current #define has been processed and entered into the
hash table. */
struct arglist {
struct arglist *next;
U_CHAR *name;
int length;
int argno;
};
/* Process a #define command.
BUF points to the contents of the #define command, as a continguous string.
LIMIT points to the first character past the end of the definition.
KEYWORD is the keyword-table entry for #define. */
do_define (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
U_CHAR *bp; /* temp ptr into input buffer */
U_CHAR *symname; /* remember where symbol name starts */
int sym_length; /* and how long it is */
DEFINITION *defn;
int arglengths = 0; /* Accumulate lengths of arg names
plus number of args. */
int hashcode;
bp = buf;
while (is_hor_space[*bp])
bp++;
if (!is_idstart[*bp])
warning ("macro name starts with a digit");
symname = bp; /* remember where it starts */
while (is_idchar[*bp] && bp < limit) {
if (*bp == '$' && pedantic) {
if (! dollar_seen)
warning ("ANSI C forbids `$' in identifier (first use here)");
dollar_seen = 1;
}
bp++;
}
sym_length = bp - symname;
/* lossage will occur if identifiers or control keywords are broken
across lines using backslash. This is not the right place to take
care of that. */
if (*bp == '(') {
struct arglist *arg_ptrs = NULL;
int argno = 0;
bp++; /* skip '(' */
SKIP_WHITE_SPACE (bp);
/* Loop over macro argument names. */
while (*bp != ')') {
struct arglist *temp;
temp = (struct arglist *) alloca (sizeof (struct arglist));
temp->name = bp;
temp->next = arg_ptrs;
temp->argno = argno++;
arg_ptrs = temp;
if (!is_idstart[*bp])
warning ("parameter name starts with a digit in #define");
/* Find the end of the arg name. */
while (is_idchar[*bp]) {
if (*bp == '$' && pedantic) {
if (! dollar_seen)
warning ("ANSI C forbids `$' in identifier (first use here)");
dollar_seen = 1;
}
bp++;
}
temp->length = bp - temp->name;
arglengths += temp->length + 2;
SKIP_WHITE_SPACE (bp);
if (temp->length == 0 || (*bp != ',' && *bp != ')')) {
error ("badly punctuated parameter list in #define");
goto nope;
}
if (*bp == ',') {
bp++;
SKIP_WHITE_SPACE (bp);
}
if (bp >= limit) {
error ("unterminated parameter list in #define");
goto nope;
}
}
++bp; /* skip paren */
/* Skip exactly one space or tab if any. */
if (bp < limit && (*bp == ' ' || *bp == '\t')) ++bp;
/* now everything from bp before limit is the definition. */
defn = collect_expansion (bp, limit, argno, arg_ptrs);
/* Now set defn->argnames to the result of concatenating
the argument names in reverse order
with comma-space between them. */
defn->argnames = (U_CHAR *) xmalloc (arglengths + 1);
{
struct arglist *temp;
int i = 0;
for (temp = arg_ptrs; temp; temp = temp->next)
{
bcopy (temp->name, &defn->argnames[i], temp->length);
i += temp->length;
if (temp->next != 0) {
defn->argnames[i++] = ',';
defn->argnames[i++] = ' ';
}
}
defn->argnames[i] = 0;
}
} else {
/* simple expansion or empty definition; gobble it */
if (is_hor_space[*bp])
++bp; /* skip exactly one blank/tab char */
/* now everything from bp before limit is the definition. */
defn = collect_expansion (bp, limit, -1, 0);
defn->argnames = (U_CHAR *) "";
}
hashcode = hashf (symname, sym_length, HASHSIZE);
{
HASHNODE *hp;
if ((hp = lookup (symname, sym_length, hashcode)) != NULL) {
if (hp->type != T_MACRO
|| compare_defs (defn, hp->value.defn)) {
U_CHAR *msg; /* what pain... */
msg = (U_CHAR *) alloca (sym_length + 20);
bcopy (symname, msg, sym_length);
strcpy (msg + sym_length, " redefined");
warning (msg);
}
/* Replace the old definition. */
hp->type = T_MACRO;
hp->value.defn = defn;
} else
install (symname, sym_length, T_MACRO, defn, hashcode);
}
return 0;
nope:
return 1;
}
/*
* return zero if two DEFINITIONs are isomorphic
*/
static
compare_defs (d1, d2)
DEFINITION *d1, *d2;
{
register struct reflist *a1, *a2;
register U_CHAR *p1 = d1->expansion;
register U_CHAR *p2 = d2->expansion;
int first = 1;
if (d1->nargs != d2->nargs)
return 1;
if (strcmp (d1->argnames, d2->argnames))
return 1;
for (a1 = d1->pattern, a2 = d2->pattern; a1 && a2;
a1 = a1->next, a2 = a2->next) {
if (!((a1->nchars == a2->nchars && ! strncmp (p1, p2, a1->nchars))
|| ! comp_def_part (first, p1, a1->nchars, p2, a2->nchars, 0))
|| a1->argno != a2->argno
|| a1->stringify != a2->stringify
|| a1->raw_before != a2->raw_before
|| a1->raw_after != a2->raw_after)
return 1;
first = 0;
p1 += a1->nchars;
p2 += a2->nchars;
}
if (a1 != a2)
return 1;
if (comp_def_part (first, p1, d1->length - (p1 - d1->expansion),
p2, d2->length - (p2 - d2->expansion), 1))
return 1;
return 0;
}
/* Return 1 if two parts of two macro definitions are effectively different.
One of the parts starts at BEG1 and has LEN1 chars;
the other has LEN2 chars at BEG2.
Any sequence of whitespace matches any other sequence of whitespace.
FIRST means these parts are the first of a macro definition;
so ignore leading whitespace entirely.
LAST means these parts are the last of a macro definition;
so ignore trailing whitespace entirely. */
comp_def_part (first, beg1, len1, beg2, len2, last)
int first;
U_CHAR *beg1, *beg2;
int len1, len2;
int last;
{
register U_CHAR *end1 = beg1 + len1;
register U_CHAR *end2 = beg2 + len2;
if (first) {
while (beg1 != end1 && is_space[*beg1]) beg1++;
while (beg2 != end2 && is_space[*beg2]) beg2++;
}
if (last) {
while (beg1 != end1 && is_space[end1[-1]]) end1--;
while (beg2 != end2 && is_space[end2[-1]]) end2--;
}
while (beg1 != end1 && beg2 != end2) {
if (is_space[*beg1] && is_space[*beg2]) {
while (beg1 != end1 && is_space[*beg1]) beg1++;
while (beg2 != end2 && is_space[*beg2]) beg2++;
} else if (*beg1 == *beg2) {
beg1++; beg2++;
} else break;
}
return (beg1 != end1) || (beg2 != end2);
}
/* Read a replacement list for a macro with parameters.
Build the DEFINITION structure.
Reads characters of text starting at BUF until LIMIT.
ARGLIST specifies the formal parameters to look for
in the text of the definition; NARGS is the number of args
in that list, or -1 for a macro name that wants no argument list.
MACRONAME is the macro name itself (so we can avoid recursive expansion)
and NAMELEN is its length in characters.
Note that comments and backslash-newlines have already been deleted
from the argument. */
/* Leading and trailing Space, Tab, etc. are converted to markers
Newline Space, Newline Tab, etc.
Newline Space makes a space in the final output
but is discarded if stringified. (Newline Tab is similar but
makes a Tab instead.)
If there is no trailing whitespace, a Newline Space is added at the end
to prevent concatenation that would be contrary to the standard. */
static DEFINITION *
collect_expansion (buf, end, nargs, arglist)
U_CHAR *buf, *end;
int nargs;
struct arglist *arglist;
{
DEFINITION *defn;
register U_CHAR *p, *limit, *lastp, *exp_p;
struct reflist *endpat = NULL;
/* Pointer to first nonspace after last ## seen. */
U_CHAR *concat = 0;
/* Pointer to first nonspace after last single-# seen. */
U_CHAR *stringify = 0;
/* Scan thru the replacement list, ignoring comments and quoted
strings, picking up on the macro calls. It does a linear search
thru the arg list on every potential symbol. Profiling might say
that something smarter should happen. */
if (end < buf)
abort ();
defn = (DEFINITION *) xcalloc (1, sizeof (DEFINITION) + 2 * (end - buf + 2));
defn->nargs = nargs;
exp_p = defn->expansion = (U_CHAR *) defn + sizeof (DEFINITION);
lastp = exp_p;
/* Speed this loop up later? */
p = buf;
limit = end;
/* Find the beginning of the trailing whitespace. */
while (p < limit && is_space[limit[-1]]) limit--;
/* Convert leading whitespace to Newline-markers. */
while (p < limit && is_space[*p]) {
*exp_p++ = '\n';
*exp_p++ = *p++;
}
/* Process the main body of the definition. */
while (p < limit) {
int skipped_arg = 0;
register U_CHAR c = *p++;
*exp_p++ = c;
switch (c) {
case '\'':
case '\"':
if (!traditional) {
for (; p < limit && *p != c; p++) {
*exp_p++ = *p;
if (*p == '\\') {
*exp_p++ = *++p;
}
}
*exp_p++ = *p++;
}
break;
/* Special hack: if a \# is written in the #define
include a # in the definition. This is useless for C code
but useful for preprocessing other things. */
case '\\':
if (p < limit && *p == '#') {
/* Pass through this # */
exp_p--;
*exp_p++ = *p++;
}
break;
case '#':
if (p < limit && *p == '#') {
/* ##: concatenate preceding and following tokens. */
/* Take out the first #, discard preceding whitespace. */
exp_p--;
while (exp_p > lastp && is_hor_space[exp_p[-1]])
--exp_p;
/* Skip the second #. */
p++;
/* Discard following whitespace. */
SKIP_WHITE_SPACE (p);
concat = p;
} else {
/* Single #: stringify following argument ref.
Don't leave the # in the expansion. */
exp_p--;
SKIP_WHITE_SPACE (p);
if (p == limit || ! is_idstart[*p] || nargs <= 0)
error ("# operator should be followed by a macro argument name\n");
else
stringify = p;
}
break;
}
if (is_idchar[c] && nargs > 0) {
U_CHAR *id_beg = p - 1;
int id_len;
--exp_p;
while (p != limit && is_idchar[*p]) p++;
id_len = p - id_beg;
if (is_idstart[c]) {
register struct arglist *arg;
for (arg = arglist; arg != NULL; arg = arg->next) {
struct reflist *tpat;
if (arg->name[0] == c
&& arg->length == id_len
&& strncmp (arg->name, id_beg, id_len) == 0) {
/* make a pat node for this arg and append it to the end of
the pat list */
tpat = (struct reflist *) xmalloc (sizeof (struct reflist));
tpat->next = NULL;
tpat->stringify = stringify == id_beg;
tpat->raw_before = concat == id_beg;
tpat->raw_after = 0;
if (endpat == NULL)
defn->pattern = tpat;
else
endpat->next = tpat;
endpat = tpat;
tpat->argno = arg->argno;
tpat->nchars = exp_p - lastp;
{
register U_CHAR *p1 = p;
SKIP_WHITE_SPACE (p1);
if (p1 + 2 <= limit && p1[0] == '#' && p1[1] == '#')
tpat->raw_after = 1;
}
lastp = exp_p; /* place to start copying from next time */
skipped_arg = 1;
break;
}
}
}
/* If this was not a macro arg, copy it into the expansion. */
if (! skipped_arg) {
register U_CHAR *lim1 = p;
p = id_beg;
while (p != lim1)
*exp_p++ = *p++;
if (stringify == id_beg)
error ("# operator should be followed by a macro argument name\n");
}
}
}
if (limit < end) {
/* Convert trailing whitespace to Newline-markers. */
while (limit < end && is_space[*limit]) {
*exp_p++ = '\n';
*exp_p++ = *limit++;
}
} else if (!traditional) {
/* There is no trailing whitespace, so invent some. */
*exp_p++ = '\n';
*exp_p++ = ' ';
}
*exp_p = '\0';
defn->length = exp_p - defn->expansion;
#if 0
/* This isn't worth the time it takes. */
/* give back excess storage */
defn->expansion = (U_CHAR *) xrealloc (defn->expansion, defn->length + 1);
#endif
return defn;
}
#ifdef DEBUG
/*
* debugging routine ---- return a ptr to a string containing
* first n chars of s. Returns a ptr to a static object
* since I happen to know it will fit.
*/
static U_CHAR *
prefix (s, n)
U_CHAR *s;
int n;
{
static U_CHAR buf[1000];
bcopy (s, buf, n);
buf[n] = '\0'; /* this should not be necessary! */
return buf;
}
#endif
/*
* interpret #line command. Remembers previously seen fnames
* in its very own hash table.
*/
#define FNAME_HASHSIZE 37
do_line (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
register U_CHAR *bp;
FILE_BUF *ip = &instack[indepth];
FILE_BUF tem;
int new_lineno;
/* Expand any macros. */
tem = expand_to_temp_buffer (buf, limit, 0);
/* Point to macroexpanded line, which is null-terminated now. */
bp = tem.buf;
SKIP_WHITE_SPACE (bp);
if (!isdigit (*bp)) {
error ("invalid format #line command");
return;
}
/* The Newline at the end of this line remains to be processed.
To put the next line at the specified line number,
we must store a line number now that is one less. */
new_lineno = atoi (bp) - 1;
/* skip over the line number. */
while (isdigit (*bp))
bp++;
if (*bp && !is_space[*bp]) {
error ("invalid format #line command");
return;
}
SKIP_WHITE_SPACE (bp);
if (*bp == '\"') {
static HASHNODE *fname_table[FNAME_HASHSIZE];
HASHNODE *hp, **hash_bucket;
U_CHAR *fname;
int fname_length;
fname = ++bp;
while (*bp && *bp != '\"')
bp++;
if (*bp != '\"') {
error ("invalid format #line command");
return;
}
fname_length = bp - fname;
bp++;
SKIP_WHITE_SPACE (bp);
if (*bp) {
error ("invalid format #line command");
return;
}
hash_bucket =
&fname_table[hashf (fname, fname_length, FNAME_HASHSIZE)];
for (hp = *hash_bucket; hp != NULL; hp = hp->next)
if (hp->length == fname_length &&
strncmp (hp->value.cpval, fname, fname_length) == 0) {
ip->fname = hp->value.cpval;
break;
}
if (hp == 0) {
/* Didn't find it; cons up a new one. */
hp = (HASHNODE *) xcalloc (1, sizeof (HASHNODE) + fname_length + 1);
hp->next = *hash_bucket;
*hash_bucket = hp;
hp->length = fname_length;
ip->fname = hp->value.cpval = ((char *) hp) + sizeof (HASHNODE);
bcopy (fname, hp->value.cpval, fname_length);
}
} else if (*bp) {
error ("invalid format #line command");
return;
}
ip->lineno = new_lineno;
output_line_command (ip, op, 0);
check_expand (op, ip->length - (ip->bufp - ip->buf));
}
/*
* remove all definitions of symbol from symbol table.
* according to un*x /lib/cpp, it is not an error to undef
* something that has no definitions, so it isn't one here either.
*/
do_undef (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
HASHNODE *hp;
SKIP_WHITE_SPACE (buf);
while ((hp = lookup (buf, -1, -1)) != NULL) {
if (hp->type != T_MACRO)
error ("undefining `%s'", hp->name);
delete_macro (hp);
}
}
/*
* Report a fatal error detected by the program we are processing.
* Use the text of the line in the error message, then terminate.
* (We use error() because it prints the filename & line#.)
*/
do_error (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
int length = limit - buf;
char *copy = (char *) xmalloc (length + 1);
bcopy (buf, copy, length);
copy[length] = 0;
SKIP_WHITE_SPACE (copy);
error ("#error %s", copy);
exit (FATAL_EXIT_CODE);
}
#if 0
/* This was a fun hack, but #pragma seems to start to be useful.
By failing to recognize it, we pass it through unchanged to cc1. */
/*
* the behavior of the #pragma directive is implementation defined.
* this implementation defines it as follows.
*/
do_pragma ()
{
close (0);
if (open ("/dev/tty", O_RDONLY) != 0)
goto nope;
close (1);
if (open ("/dev/tty", O_WRONLY) != 1)
goto nope;
execl ("/usr/games/hack", "#pragma", 0);
execl ("/usr/games/rogue", "#pragma", 0);
execl ("/usr/new/emacs", "-f", "hanoi", "9", "-kill", 0);
execl ("/usr/local/emacs", "-f", "hanoi", "9", "-kill", 0);
nope:
fatal ("You are in a maze of twisty compiler features, all different");
}
#endif
/* Just ignore #sccs, on systems where we define it at all. */
do_sccs ()
{}
/*
* handle #if command by
* 1) inserting special `defined' keyword into the hash table
* that gets turned into 0 or 1 by special_symbol (thus,
* if the luser has a symbol called `defined' already, it won't
* work inside the #if command)
* 2) rescan the input into a temporary output buffer
* 3) pass the output buffer to the yacc parser and collect a value
* 4) clean up the mess left from steps 1 and 2.
* 5) call conditional_skip to skip til the next #endif (etc.),
* or not, depending on the value from step 3.
*/
do_if (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
int value;
FILE_BUF *ip = &instack[indepth];
value = eval_if_expression (buf, limit - buf);
conditional_skip (ip, value == 0, T_IF);
}
/*
* handle a #elif directive by not changing if_stack either.
* see the comment above do_else.
*/
do_elif (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
int value;
FILE_BUF *ip = &instack[indepth];
if (if_stack == instack[indepth].if_stack) {
error ("#elif not within a conditional");
return;
} else {
if (if_stack->type != T_IF && if_stack->type != T_ELIF) {
error ("#elif after #else");
fprintf (stderr, " (matches line %d", if_stack->lineno);
if (if_stack->fname != NULL && ip->fname != NULL &&
strcmp (if_stack->fname, ip->fname) != 0)
fprintf (stderr, ", file %s", if_stack->fname);
fprintf (stderr, ")\n");
}
if_stack->type = T_ELIF;
}
if (if_stack->if_succeeded)
skip_if_group (ip, 0);
else {
value = eval_if_expression (buf, limit - buf);
if (value == 0)
skip_if_group (ip, 0);
else {
++if_stack->if_succeeded; /* continue processing input */
output_line_command (ip, op, 1);
}
}
}
/*
* evaluate a #if expression in BUF, of length LENGTH,
* then parse the result as a C expression and return the value as an int.
*/
static int
eval_if_expression (buf, length)
U_CHAR *buf;
int length;
{
FILE_BUF temp_obuf;
HASHNODE *save_defined;
int value;
save_defined = install ("defined", -1, T_SPEC_DEFINED, 0, -1);
temp_obuf = expand_to_temp_buffer (buf, buf + length, 0);
delete_macro (save_defined); /* clean up special symbol */
value = parse_c_expression (temp_obuf.buf);
free (temp_obuf.buf);
return value;
}
/*
* routine to handle ifdef/ifndef. Try to look up the symbol,
* then do or don't skip to the #endif/#else/#elif depending
* on what directive is actually being processed.
*/
do_xifdef (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
int skip;
FILE_BUF *ip = &instack[indepth];
U_CHAR *end;
/* Discard leading and trailing whitespace. */
SKIP_WHITE_SPACE (buf);
while (limit != buf && is_hor_space[limit[-1]]) limit--;
/* Find the end of the identifier at the beginning. */
for (end = buf; is_idchar[*end]; end++);
if (end == buf)
{
skip = (keyword->type == T_IFDEF);
if (! traditional)
warning (end == limit ? "#%s with no argument"
: "#%s argument starts with punctuation",
keyword->name);
}
else
{
if (pedantic && buf[0] >= '0' && buf[0] <= '9')
warning ("#%s argument starts with a digit", keyword->name);
else if (end != limit && !traditional)
warning ("garbage at end of #%s argument", keyword->name);
skip = (lookup (buf, end-buf, -1) == NULL) ^ (keyword->type == T_IFNDEF);
}
conditional_skip (ip, skip, T_IF);
}
/*
* push TYPE on stack; then, if SKIP is nonzero, skip ahead.
*/
static
conditional_skip (ip, skip, type)
FILE_BUF *ip;
int skip;
enum node_type type;
{
IF_STACK_FRAME *temp;
temp = (IF_STACK_FRAME *) xcalloc (1, sizeof (IF_STACK_FRAME));
temp->fname = ip->fname;
temp->lineno = ip->lineno;
temp->next = if_stack;
if_stack = temp;
if_stack->type = type;
if (skip != 0) {
skip_if_group (ip, 0);
return;
} else {
++if_stack->if_succeeded;
output_line_command (ip, &outbuf, 1);
}
}
/*
* skip to #endif, #else, or #elif. adjust line numbers, etc.
* leaves input ptr at the sharp sign found.
* If ANY is nonzero, return at next directive of any sort.
*/
static
skip_if_group (ip, any)
FILE_BUF *ip;
int any;
{
register U_CHAR *bp = ip->bufp, *cp;
register U_CHAR *endb = ip->buf + ip->length;
struct directive *kt;
IF_STACK_FRAME *save_if_stack = if_stack; /* don't pop past here */
U_CHAR *beg_of_line = bp;
while (bp < endb) {
switch (*bp++) {
case '/': /* possible comment */
if (*bp == '\\' && bp[1] == '\n')
newline_fix (bp);
if (*bp == '*'
#ifdef CPLUSPLUS
|| *bp == '/'
#endif
) {
ip->bufp = ++bp;
bp = skip_to_end_of_comment (ip, &ip->lineno);
}
break;
case '\"':
case '\'':
if (!traditional)
bp = skip_quoted_string (bp - 1, endb, ip->lineno, &ip->lineno, 0, 0);
break;
case '\n':
++ip->lineno;
beg_of_line = bp;
break;
case '#':
ip->bufp = bp - 1;
/* # keyword: a # must be first nonblank char on the line */
if (beg_of_line == 0)
break;
/* Scan from start of line, skipping whitespace, comments
and backslash-newlines, and see if we reach this #.
If not, this # is not special. */
bp = beg_of_line;
while (1) {
if (is_hor_space[*bp])
bp++;
else if (*bp == '\\' && bp[1] == '\n')
bp += 2;
else if (*bp == '/' && bp[1] == '*') {
bp += 2;
while (!(*bp == '*' && bp[1] == '/'))
bp++;
bp += 2;
}
#ifdef CPLUSPLUS
else if (*bp == '/' && bp[1] == '/') {
bp += 2;
while (*bp++ != '\n') ;
}
#endif
else break;
}
if (bp != ip->bufp) {
bp = ip->bufp + 1; /* Reset bp to after the #. */
break;
}
bp = ip->bufp + 1; /* point at '#' */
/* Skip whitespace and \-newline. */
while (1) {
if (is_hor_space[*bp])
bp++;
else if (*bp == '\\' && bp[1] == '\n')
bp += 2;
else break;
}
cp = bp;
/* Now find end of directive name.
If we encounter a backslash-newline, exchange it with any following
symbol-constituents so that we end up with a contiguous name. */
while (1) {
if (is_idchar[*bp])
bp++;
else {
if (*bp == '\\' && bp[1] == '\n')
name_newline_fix (bp);
if (is_idchar[*bp])
bp++;
else break;
}
}
for (kt = directive_table; kt->length >= 0; kt++) {
IF_STACK_FRAME *temp;
if (strncmp (cp, kt->name, kt->length) == 0
&& !is_idchar[cp[kt->length]]) {
/* If we are asked to return on next directive,
do so now. */
if (any)
return;
switch (kt->type) {
case T_IF:
case T_IFDEF:
case T_IFNDEF:
temp = (IF_STACK_FRAME *) xcalloc (1, sizeof (IF_STACK_FRAME));
temp->next = if_stack;
if_stack = temp;
temp->lineno = ip->lineno;
temp->fname = ip->fname;
temp->type = kt->type;
break;
case T_ELSE:
case T_ENDIF:
if (pedantic && if_stack != save_if_stack)
validate_else (bp);
case T_ELIF:
if (if_stack == instack[indepth].if_stack) {
error ("#%s not within a conditional", kt->name);
break;
}
else if (if_stack == save_if_stack)
return; /* found what we came for */
if (kt->type != T_ENDIF) {
if (if_stack->type == T_ELSE)
error ("#else or #elif after #else");
if_stack->type = kt->type;
break;
}
temp = if_stack;
if_stack = if_stack->next;
free (temp);
break;
}
break;
}
}
}
}
ip->bufp = bp;
/* after this returns, rescan will exit because ip->bufp
now points to the end of the buffer.
rescan is responsible for the error message also. */
}
/*
* handle a #else directive. Do this by just continuing processing
* without changing if_stack ; this is so that the error message
* for missing #endif's etc. will point to the original #if. It
* is possible that something different would be better.
*/
do_else (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
FILE_BUF *ip = &instack[indepth];
if (pedantic) {
SKIP_WHITE_SPACE (buf);
if (buf != limit)
warning ("text following #else violates ANSI standard");
}
if (if_stack == instack[indepth].if_stack) {
error ("#else not within a conditional");
return;
} else {
if (if_stack->type != T_IF && if_stack->type != T_ELIF) {
error ("#else after #else");
fprintf (stderr, " (matches line %d", if_stack->lineno);
if (strcmp (if_stack->fname, ip->fname) != 0)
fprintf (stderr, ", file %s", if_stack->fname);
fprintf (stderr, ")\n");
}
if_stack->type = T_ELSE;
}
if (if_stack->if_succeeded)
skip_if_group (ip, 0);
else {
++if_stack->if_succeeded; /* continue processing input */
output_line_command (ip, op, 1);
}
}
/*
* unstack after #endif command
*/
do_endif (buf, limit, op, keyword)
U_CHAR *buf, *limit;
FILE_BUF *op;
struct directive *keyword;
{
if (pedantic) {
SKIP_WHITE_SPACE (buf);
if (buf != limit)
warning ("text following #endif violates ANSI standard");
}
if (if_stack == instack[indepth].if_stack)
error ("unbalanced #endif");
else {
IF_STACK_FRAME *temp = if_stack;
if_stack = if_stack->next;
free (temp);
output_line_command (&instack[indepth], op, 1);
}
}
/* When an #else or #endif is found while skipping failed conditional,
if -pedantic was specified, this is called to warn about text after
the command name. P points to the first char after the command name. */
validate_else (p)
register U_CHAR *p;
{
/* Advance P over whitespace and comments. */
while (1) {
if (*p == '\\' && p[1] == '\n')
p += 2;
if (is_hor_space[*p])
p++;
else if (*p == '/') {
if (p[1] == '\\' && p[2] == '\n')
newline_fix (p + 1);
if (p[1] == '*') {
p += 2;
/* Don't bother warning about unterminated comments
since that will happen later. Just be sure to exit. */
while (*p) {
if (p[1] == '\\' && p[2] == '\n')
newline_fix (p + 1);
if (*p == '*' && p[1] == '/') {
p += 2;
break;
}
p++;
}
}
#ifdef CPLUSPLUS
else if (p[1] == '/') {
p += 2;
while (*p && *p++ != '\n') ;
}
#endif
} else break;
}
if (*p && *p != '\n')
warning ("text following #else or #endif violates ANSI standard");
}
/*
* Skip a comment, assuming the input ptr immediately follows the
* initial slash-star. Bump line counter as necessary.
* (The canonical line counter is &ip->lineno).
* Don't use this routine (or the next one) if bumping the line
* counter is not sufficient to deal with newlines in the string.
*/
U_CHAR *
skip_to_end_of_comment (ip, line_counter)
register FILE_BUF *ip;
int *line_counter; /* place to remember newlines, or NULL */
{
register U_CHAR *limit = ip->buf + ip->length;
register U_CHAR *bp = ip->bufp;
FILE_BUF *op = &outbuf; /* JF */
int output = put_out_comments && !line_counter;
/* JF this line_counter stuff is a crock to make sure the
comment is only put out once, no matter how many times
the comment is skipped. It almost works */
if (output) {
*op->bufp++ = '/';
*op->bufp++ = '*';
}
#ifdef CPLUSPLUS
if (bp[-1] == '/') {
if (output)
{
while (bp < limit)
if ((*op->bufp++ = *bp++) == '\n')
{
bp--;
break;
}
op->bufp[-1] = '*';
*op->bufp++ = '/';
*op->bufp++ = '\n';
}
else
{
while (bp < limit) {
if (*bp++ == '\n')
{
bp--;
break;
}
}
}
ip->bufp = bp;
return bp;
}
#endif
while (bp < limit) {
if (output)
*op->bufp++ = *bp;
switch (*bp++) {
case '\n':
if (line_counter != NULL)
++*line_counter;
if (output)
++op->lineno;
break;
case '*':
if (*bp == '\\' && bp[1] == '\n')
newline_fix (bp);
if (*bp == '/') {
if (output)
*op->bufp++ = '/';
ip->bufp = ++bp;
return bp;
}
break;
}
}
ip->bufp = bp;
return bp;
}
/*
* Skip over a quoted string. BP points to the opening quote.
* Returns a pointer after the closing quote. Don't go past LIMIT.
* START_LINE is the line number of the starting point (but it need
* not be valid if the starting point is inside a macro expansion).
*
* The input stack state is not changed.
*
* If COUNT_NEWLINES is nonzero, it points to an int to increment
* for each newline passed.
*
* If BACKSLASH_NEWLINES_P is nonzero, store 1 thru it
* if we pass a backslash-newline.
*
* If EOFP is nonzero, set *EOFP to 1 if the string is unterminated.
*/
U_CHAR *
skip_quoted_string (bp, limit, start_line, count_newlines, backslash_newlines_p, eofp)
register U_CHAR *bp;
register U_CHAR *limit;
int start_line;
int *count_newlines;
int *backslash_newlines_p;
int *eofp;
{
register U_CHAR c, match;
match = *bp++;
while (1) {
if (bp >= limit) {
error_with_line (line_for_error (start_line),
"unterminated string constant");
if (eofp)
*eofp = 1;
break;
}
c = *bp++;
if (c == '\\') {
while (*bp == '\\' && bp[1] == '\n') {
if (backslash_newlines_p)
*backslash_newlines_p = 1;
if (count_newlines)
++*count_newlines;
bp += 2;
}
if (*bp == '\n' && count_newlines) {
if (backslash_newlines_p)
*backslash_newlines_p = 1;
++*count_newlines;
}
bp++;
} else if (c == '\n') {
if (count_newlines)
++*count_newlines;
} else if (c == match)
break;
}
return bp;
}
/*
* write out a #line command, for instance, after an #include file.
* If CONDITIONAL is nonzero, we can omit the #line if it would
* appear to be a no-op, and we can output a few newlines instead
* if we want to increase the line number by a small amount.
*/
static
output_line_command (ip, op, conditional)
FILE_BUF *ip, *op;
int conditional;
{
int len;
char line_cmd_buf[500];
if (no_line_commands
|| ip->fname == NULL
|| no_output) {
op->lineno = ip->lineno;
return;
}
if (conditional) {
if (ip->lineno == op->lineno)
return;
/* If the inherited line number is a little too small,
output some newlines instead of a #line command. */
if (ip->lineno > op->lineno && ip->lineno < op->lineno + 8) {
check_expand (op, 10);
while (ip->lineno > op->lineno) {
*op->bufp++ = '\n';
op->lineno++;
}
return;
}
}
#ifdef OUTPUT_LINE_COMMANDS
sprintf (line_cmd_buf, "#line %d \"%s\"\n", ip->lineno, ip->fname);
#else
sprintf (line_cmd_buf, "# %d \"%s\"\n", ip->lineno, ip->fname);
#endif
len = strlen (line_cmd_buf);
check_expand (op, len + 1);
if (op->bufp > op->buf && op->bufp[-1] != '\n')
*op->bufp++ = '\n';
bcopy (line_cmd_buf, op->bufp, len);
op->bufp += len;
op->lineno = ip->lineno;
}
/* This structure represents one parsed argument in a macro call.
`raw' points to the argument text as written (`raw_length' is its length).
`expanded' points to the argument's macro-expansion
(its length is `expand_length').
`stringified_length' is the length the argument would have
if stringified.
`free1' and `free2', if nonzero, point to blocks to be freed
when the macro argument data is no longer needed. */
struct argdata {
U_CHAR *raw, *expanded;
int raw_length, expand_length;
int stringified_length;
U_CHAR *free1, *free2;
char newlines;
char comments;
};
/* Expand a macro call.
HP points to the symbol that is the macro being called.
Put the result of expansion onto the input stack
so that subsequent input by our caller will use it.
If macro wants arguments, caller has already verified that
an argument list follows; arguments come from the input stack. */
macroexpand (hp, op)
HASHNODE *hp;
FILE_BUF *op;
{
int nargs;
DEFINITION *defn = hp->value.defn;
register U_CHAR *xbuf;
int xbuf_len;
int start_line = instack[indepth].lineno;
/* it might not actually be a macro. */
if (hp->type != T_MACRO)
{
special_symbol (hp, op);
return;
}
nargs = defn->nargs;
if (nargs >= 0)
{
register int i;
struct argdata *args;
char *parse_error = 0;
args = (struct argdata *) alloca ((nargs + 1) * sizeof (struct argdata));
for (i = 0; i < nargs; i++) {
args[i].raw = args[i].expanded = (U_CHAR *) "";
args[i].raw_length = args[i].expand_length
= args[i].stringified_length = 0;
args[i].free1 = args[i].free2 = 0;
}
/* Parse all the macro args that are supplied. I counts them.
The first NARGS args are stored in ARGS.
The rest are discarded. */
i = 0;
do {
/* Discard the open-parenthesis or comma before the next arg. */
++instack[indepth].bufp;
if (parse_error = macarg ((i < nargs || (nargs == 0 && i == 0)) ? &args[i] : 0))
{
error_with_line (line_for_error (start_line), parse_error);
break;
}
i++;
} while (*instack[indepth].bufp != ')');
if (nargs == 0 && i == 1) {
register U_CHAR *bp = args[0].raw;
register U_CHAR *lim = bp + args[0].raw_length;
while (bp != lim && is_space[*bp]) bp++;
if (bp != lim)
error ("arguments given to macro `%s'", hp->name);
} else if (i < nargs)
error ("only %d args to macro `%s'", i, hp->name);
else if (i > nargs)
error ("too many (%d) args to macro `%s'", i, hp->name);
/* Swallow the closeparen. */
++instack[indepth].bufp;
/* If macro wants zero args, we parsed the arglist for checking only.
Read directly from the macro definition. */
if (nargs == 0) {
xbuf = defn->expansion;
xbuf_len = defn->length;
} else {
register U_CHAR *exp = defn->expansion;
register int offset; /* offset in expansion,
copied a piece at a time */
register int totlen; /* total amount of exp buffer filled so far */
register struct reflist *ap;
/* Macro really takes args. Compute the expansion of this call. */
/* Compute length in characters of the macro's expansion. */
xbuf_len = defn->length;
for (ap = defn->pattern; ap != NULL; ap = ap->next) {
if (ap->stringify)
xbuf_len += args[ap->argno].stringified_length;
else if (ap->raw_before || ap->raw_after)
xbuf_len += args[ap->argno].raw_length;
else
xbuf_len += args[ap->argno].expand_length;
}
xbuf = (U_CHAR *) xmalloc (xbuf_len + 1);
/* Generate in XBUF the complete expansion
with arguments substituted in.
TOTLEN is the total size generated so far.
OFFSET is the index in the definition
of where we are copying from. */
offset = totlen = 0;
for (ap = defn->pattern; ap != NULL; ap = ap->next) {
register struct argdata *arg = &args[ap->argno];
for (i = 0; i < ap->nchars; i++)
xbuf[totlen++] = exp[offset++];
if (ap->stringify != 0) {
int arglen = arg->raw_length;
int escaped = 0;
int in_string = 0;
int c;
i = 0;
while (i < arglen
&& (c = arg->raw[i], is_space[c]))
i++;
while (i < arglen
&& (c = arg->raw[arglen - 1], is_space[c]))
arglen--;
xbuf[totlen++] = '\"'; /* insert beginning quote */
for (; i < arglen; i++) {
c = arg->raw[i];
/* Special markers Newline Space and Newline Newline
generate nothing for a stringified argument. */
if (c == '\n') {
i++;
continue;
}
/* Internal sequences of whitespace are replaced by one space. */
if (is_space[c]) {
while (c = arg->raw[i+1], is_space[c]) i++;
c = ' ';
}
if (escaped)
escaped = 0;
else {
if (c == '\\')
escaped = 1;
if (in_string && c == in_string)
in_string = 0;
else if (c == '\"' || c == '\'')
in_string = c;
}
/* Escape these chars */
if (c == '\"' || (in_string && c == '\\'))
xbuf[totlen++] = '\\';
if (isprint (c))
xbuf[totlen++] = c;
else {
sprintf (&xbuf[totlen], "\\%03o", (unsigned int) c);
totlen += 4;
}
}
xbuf[totlen++] = '\"'; /* insert ending quote */
} else if (ap->raw_before || ap->raw_after) {
U_CHAR *p1 = arg->raw;
U_CHAR *l1 = p1 + arg->raw_length;
if (ap->raw_before) {
while (p1 != l1 && is_space[*p1]) p1++;
while (p1 != l1 && is_idchar[*p1])
xbuf[totlen++] = *p1++;
/* Delete any no-reexpansion marker that follows
an identifier at the beginning of the argument
if the argument is concatenated with what precedes it. */
if (p1[0] == '\n' && p1[1] == '-')
p1 += 2;
}
if (ap->raw_after) {
/* Arg is concatenated after: delete trailing whitespace,
whitespace markers, and no-reexpansion markers. */
while (p1 != l1) {
if (is_space[l1[-1]]) l1--;
else if (l1[-1] == '-') {
U_CHAR *p2 = l1 - 1;
/* If a `-' is preceded by an odd number of newlines then it
and the last newline are a no-reexpansion marker. */
while (p2 != p1 && p2[-1] == '\n') p2--;
if ((l1 - 1 - p2) & 1) {
l1 -= 2;
}
else break;
}
else break;
}
}
bcopy (p1, xbuf + totlen, l1 - p1);
totlen += l1 - p1;
} else {
bcopy (arg->expanded, xbuf + totlen, arg->expand_length);
totlen += arg->expand_length;
}
if (totlen > xbuf_len)
abort ();
}
/* if there is anything left of the definition
after handling the arg list, copy that in too. */
for (i = offset; i < defn->length; i++)
xbuf[totlen++] = exp[i];
xbuf[totlen] = 0;
xbuf_len = totlen;
for (i = 0; i < nargs; i++) {
if (args[i].free1 != 0)
free (args[i].free1);
if (args[i].free2 != 0)
free (args[i].free2);
}
}
}
else
{
xbuf = defn->expansion;
xbuf_len = defn->length;
}
/* Now put the expansion on the input stack
so our caller will commence reading from it. */
{
register FILE_BUF *ip2;
ip2 = &instack[++indepth];
ip2->fname = 0;
ip2->lineno = 0;
ip2->buf = xbuf;
ip2->length = xbuf_len;
ip2->bufp = xbuf;
ip2->free = (nargs > 0) ? xbuf : 0;
ip2->macro = hp;
ip2->if_stack = if_stack;
if (!traditional)
hp->type = T_DISABLED;
}
}
/*
* Parse a macro argument and store the info on it into *ARGPTR.
* Return nonzero to indicate a syntax error.
*/
char *
macarg (argptr)
register struct argdata *argptr;
{
FILE_BUF *ip = &instack[indepth];
int paren = 0;
int newlines = 0;
int comments = 0;
/* Try to parse as much of the argument as exists at this
input stack level. */
U_CHAR *bp = macarg1 (ip->bufp, ip->buf + ip->length,
&paren, &newlines, &comments);
/* If we find the end of the argument at this level,
set up *ARGPTR to point at it in the input stack. */
if (!(ip->fname != 0 && (newlines != 0 || comments != 0))
&& bp != ip->buf + ip->length) {
if (argptr != 0) {
argptr->raw = ip->bufp;
argptr->raw_length = bp - ip->bufp;
}
ip->bufp = bp;
} else {
/* This input stack level ends before the macro argument does.
We must pop levels and keep parsing.
Therefore, we must allocate a temporary buffer and copy
the macro argument into it. */
int bufsize = bp - ip->bufp;
int extra = newlines;
U_CHAR *buffer = (U_CHAR *) xmalloc (bufsize + extra + 1);
int final_start = 0;
bcopy (ip->bufp, buffer, bufsize);
ip->bufp = bp;
ip->lineno += newlines;
while (bp == ip->buf + ip->length) {
if (instack[indepth].macro == 0) {
free (buffer);
return "Unterminated macro call";
}
ip->macro->type = T_MACRO;
free (ip->buf);
ip = &instack[--indepth];
newlines = 0;
comments = 0;
bp = macarg1 (ip->bufp, ip->buf + ip->length, &paren,
&newlines, &comments);
final_start = bufsize;
bufsize += bp - ip->bufp;
extra += newlines;
buffer = (U_CHAR *) xrealloc (buffer, bufsize + extra + 1);
bcopy (ip->bufp, buffer + bufsize - (bp - ip->bufp), bp - ip->bufp);
ip->bufp = bp;
ip->lineno += newlines;
}
/* Now, if arg is actually wanted, record its raw form,
discarding comments and duplicating newlines in whatever
part of it did not come from a macro expansion.
EXTRA space has been preallocated for duplicating the newlines.
FINAL_START is the index of the start of that part. */
if (argptr != 0) {
argptr->raw = buffer;
argptr->raw_length = bufsize;
argptr->free1 = buffer;
argptr->newlines = newlines;
argptr->comments = comments;
if ((newlines || comments) && ip->fname != 0)
argptr->raw_length
= final_start +
discard_comments (argptr->raw + final_start,
argptr->raw_length - final_start,
newlines);
argptr->raw[argptr->raw_length] = 0;
if (argptr->raw_length > bufsize + extra)
abort ();
}
}
/* If we are not discarding this argument,
macroexpand it and compute its length as stringified.
All this info goes into *ARGPTR. */
if (argptr != 0) {
FILE_BUF obuf;
register U_CHAR *buf, *lim;
register int totlen;
obuf = expand_to_temp_buffer (argptr->raw,
argptr->raw + argptr->raw_length,
1);
argptr->expanded = obuf.buf;
argptr->expand_length = obuf.length;
argptr->free2 = obuf.buf;
buf = argptr->raw;
lim = buf + argptr->raw_length;
while (buf != lim && is_space[*buf])
buf++;
while (buf != lim && is_space[lim[-1]])
lim--;
totlen = 2; /* Count opening and closing quote. */
while (buf != lim) {
register U_CHAR c = *buf++;
totlen++;
/* Internal sequences of whitespace are replaced by one space. */
if (is_space[c])
SKIP_ALL_WHITE_SPACE (buf);
else if (c == '\"' || c == '\\') /* escape these chars */
totlen++;
else if (!isprint (c))
totlen += 3;
}
argptr->stringified_length = totlen;
}
return 0;
}
/* Scan text from START (inclusive) up to LIMIT (exclusive),
counting parens in *DEPTHPTR,
and return if reach LIMIT
or before a `)' that would make *DEPTHPTR negative
or before a comma when *DEPTHPTR is zero.
Single and double quotes are matched and termination
is inhibited within them. Comments also inhibit it.
Value returned is pointer to stopping place.
Increment *NEWLINES each time a newline is passed.
Set *COMMENTS to 1 if a comment is seen. */
U_CHAR *
macarg1 (start, limit, depthptr, newlines, comments)
U_CHAR *start;
register U_CHAR *limit;
int *depthptr, *newlines, *comments;
{
register U_CHAR *bp = start;
while (bp < limit) {
switch (*bp) {
case '(':
(*depthptr)++;
break;
case ')':
if (--(*depthptr) < 0)
return bp;
break;
case '\n':
++*newlines;
break;
case '/':
if (bp[1] == '\\' && bp[2] == '\n')
newline_fix (bp + 1);
#ifdef CPLUSPLUS
if (bp[1] == '/') {
*comments = 1;
bp += 2;
while (bp < limit && *bp++ != '\n') ;
++*newlines;
break;
}
#endif
if (bp[1] != '*' || bp + 1 >= limit)
break;
*comments = 1;
bp += 2;
while (bp + 1 < limit) {
if (bp[0] == '*'
&& bp[1] == '\\' && bp[2] == '\n')
newline_fix (bp + 1);
if (bp[0] == '*' && bp[1] == '/')
break;
if (*bp == '\n') ++*newlines;
bp++;
}
break;
case '\'':
case '\"':
{
int quotec;
for (quotec = *bp++; bp + 1 < limit && *bp != quotec; bp++) {
if (*bp == '\\') {
bp++;
if (*bp == '\n')
++*newlines;
while (*bp == '\\' && bp[1] == '\n') {
bp += 2;
}
} else if (*bp == '\n')
++*newlines;
}
}
break;
case ',':
if ((*depthptr) == 0)
return bp;
break;
}
bp++;
}
return bp;
}
/* Discard comments and duplicate newlines
in the string of length LENGTH at START,
except inside of string constants.
The string is copied into itself with its beginning staying fixed.
NEWLINES is the number of newlines that must be duplicated.
We assume that that much extra space is available past the end
of the string. */
int
discard_comments (start, length, newlines)
U_CHAR *start;
int length;
int newlines;
{
register U_CHAR *ibp;
register U_CHAR *obp;
register U_CHAR *limit;
register int c;
/* If we have newlines to duplicate, copy everything
that many characters up. Then, in the second part,
we will have room to insert the newlines
while copying down.
NEWLINES may actually be too large, because it counts
newlines in string constants, and we don't duplicate those.
But that does no harm. */
if (newlines > 0) {
ibp = start + length;
obp = ibp + newlines;
limit = start;
while (limit != ibp)
*--obp = *--ibp;
}
ibp = start + newlines;
limit = start + length + newlines;
obp = start;
while (ibp < limit) {
*obp++ = c = *ibp++;
switch (c) {
case '\n':
/* Duplicate the newline. */
*obp++ = '\n';
break;
case '/':
if (*ibp == '\\' && ibp[1] == '\n')
newline_fix (ibp);
/* Delete any comment. */
#ifdef CPLUSPLUS
if (ibp[0] == '/') {
obp--;
ibp++;
while (ibp < limit && *ibp++ != '\n') ;
break;
}
#endif
if (ibp[0] != '*' || ibp + 1 >= limit)
break;
obp--;
ibp++;
while (ibp + 1 < limit) {
if (ibp[0] == '*'
&& ibp[1] == '\\' && ibp[2] == '\n')
newline_fix (ibp + 1);
if (ibp[0] == '*' && ibp[1] == '/')
break;
ibp++;
}
ibp += 2;
break;
case '\'':
case '\"':
/* Notice and skip strings, so that we don't
think that comments start inside them,
and so we don't duplicate newlines in them. */
{
int quotec = c;
while (ibp < limit)
{
*obp++ = c = *ibp++;
if (c == quotec)
break;
if (c == '\\' && ibp < limit) {
while (*ibp == '\\' && ibp[1] == '\n')
ibp += 2;
*obp++ = *ibp++;
}
}
}
break;
}
}
return obp - start;
}
/*
* error - print error message and increment count of errors.
*/
error (msg, arg1, arg2, arg3)
U_CHAR *msg;
{
int i;
FILE_BUF *ip = NULL;
for (i = indepth; i >= 0; i--)
if (instack[i].fname != NULL) {
ip = &instack[i];
break;
}
if (ip != NULL)
fprintf (stderr, "%s:%d: ", ip->fname, ip->lineno);
fprintf (stderr, msg, arg1, arg2, arg3);
fprintf (stderr, "\n", msg);
errors++;
return 0;
}
/* Print error message but don't count it. */
warning (msg, arg1, arg2, arg3)
U_CHAR *msg;
{
int i;
FILE_BUF *ip = NULL;
for (i = indepth; i >= 0; i--)
if (instack[i].fname != NULL) {
ip = &instack[i];
break;
}
if (ip != NULL)
fprintf (stderr, "%s:%d: ", ip->fname, ip->lineno);
fprintf (stderr, "warning: ");
fprintf (stderr, msg, arg1, arg2, arg3);
fprintf (stderr, "\n", msg);
return 0;
}
error_with_line (line, msg, arg1, arg2, arg3)
int line;
U_CHAR *msg;
{
int i;
FILE_BUF *ip = NULL;
for (i = indepth; i >= 0; i--)
if (instack[i].fname != NULL) {
ip = &instack[i];
break;
}
if (ip != NULL)
fprintf (stderr, "%s:%d: ", ip->fname, line);
fprintf (stderr, msg, arg1, arg2, arg3);
fprintf (stderr, "\n", msg);
errors++;
return 0;
}
/* Return the line at which an error occurred.
The error is not necessarily associated with the current spot
in the input stack, so LINE says where. LINE will have been
copied from ip->lineno for the current input level.
If the current level is for a file, we return LINE.
But if the current level is not for a file, LINE is meaningless.
In that case, we return the lineno of the innermost file. */
int
line_for_error (line)
int line;
{
int i;
int line1 = line;
for (i = indepth; i >= 0; ) {
if (instack[i].fname != 0)
return line1;
i--;
if (i < 0)
return 0;
line1 = instack[i].lineno;
}
}
/*
* If OBUF doesn't have NEEDED bytes after OPTR, make it bigger.
*
* As things stand, nothing is ever placed in the output buffer to be
* removed again except when it's KNOWN to be part of an identifier,
* so flushing and moving down everything left, instead of expanding,
* should work ok.
*/
int
grow_outbuf (obuf, needed)
register FILE_BUF *obuf;
register int needed;
{
register U_CHAR *p;
int minsize;
if (obuf->length - (obuf->bufp - obuf->buf) > needed)
return;
/* Make it at least twice as big as it is now. */
obuf->length *= 2;
/* Make it have at least 150% of the free space we will need. */
minsize = (3 * needed) / 2 + (obuf->bufp - obuf->buf);
if (minsize > obuf->length)
obuf->length = minsize;
if ((p = (U_CHAR *) xrealloc (obuf->buf, obuf->length)) == NULL)
memory_full ();
obuf->bufp = p + (obuf->bufp - obuf->buf);
obuf->buf = p;
}
/* Symbol table for macro names and special symbols */
/*
* install a name in the main hash table, even if it is already there.
* name stops with first non alphanumeric, except leading '#'.
* caller must check against redefinition if that is desired.
* delete_macro () removes things installed by install () in fifo order.
* this is important because of the `defined' special symbol used
* in #if, and also if pushdef/popdef directives are ever implemented.
*
* If LEN is >= 0, it is the length of the name.
* Otherwise, compute the length by scanning the entire name.
*
* If HASH is >= 0, it is the precomputed hash code.
* Otherwise, compute the hash code.
*/
HASHNODE *
install (name, len, type, value, hash)
U_CHAR *name;
int len;
enum node_type type;
int value;
int hash;
/* watch out here if sizeof (U_CHAR *) != sizeof (int) */
{
register HASHNODE *hp;
register int i, bucket;
register U_CHAR *p, *q;
if (len < 0) {
p = name;
while (is_idchar[*p])
p++;
len = p - name;
}
if (hash < 0)
hash = hashf (name, len, HASHSIZE);
i = sizeof (HASHNODE) + len + 1;
hp = (HASHNODE *) xmalloc (i);
bucket = hash;
hp->bucket_hdr = &hashtab[bucket];
hp->next = hashtab[bucket];
hashtab[bucket] = hp;
hp->prev = NULL;
if (hp->next != NULL)
hp->next->prev = hp;
hp->type = type;
hp->length = len;
hp->value.ival = value;
hp->name = ((U_CHAR *) hp) + sizeof (HASHNODE);
p = hp->name;
q = name;
for (i = 0; i < len; i++)
*p++ = *q++;
hp->name[len] = 0;
return hp;
}
/*
* find the most recent hash node for name name (ending with first
* non-identifier char) installed by install
*
* If LEN is >= 0, it is the length of the name.
* Otherwise, compute the length by scanning the entire name.
*
* If HASH is >= 0, it is the precomputed hash code.
* Otherwise, compute the hash code.
*/
HASHNODE *
lookup (name, len, hash)
U_CHAR *name;
int len;
int hash;
{
register U_CHAR *bp;
register HASHNODE *bucket;
if (len < 0) {
for (bp = name; is_idchar[*bp]; bp++) ;
len = bp - name;
}
if (hash < 0)
hash = hashf (name, len, HASHSIZE);
bucket = hashtab[hash];
while (bucket) {
if (bucket->length == len && strncmp (bucket->name, name, len) == 0)
return bucket;
bucket = bucket->next;
}
return NULL;
}
/*
* Delete a hash node. Some weirdness to free junk from macros.
* More such weirdness will have to be added if you define more hash
* types that need it.
*/
/* Note that the DEFINITION of a macro is removed from the hash table
but its storage is not freed. This would be a storage leak
except that it is not reasonable to keep undefining and redefining
large numbers of macros many times.
In any case, this is necessary, because a macro can be #undef'd
in the middle of reading the arguments to a call to it.
If #undef freed the DEFINITION, that would crash. */
delete_macro (hp)
HASHNODE *hp;
{
if (hp->prev != NULL)
hp->prev->next = hp->next;
if (hp->next != NULL)
hp->next->prev = hp->prev;
/* make sure that the bucket chain header that
the deleted guy was on points to the right thing afterwards. */
if (hp == *hp->bucket_hdr)
*hp->bucket_hdr = hp->next;
#if 0
if (hp->type == T_MACRO) {
DEFINITION *d = hp->value.defn;
struct reflist *ap, *nextap;
for (ap = d->pattern; ap != NULL; ap = nextap) {
nextap = ap->next;
free (ap);
}
free (d);
}
#endif
free (hp);
}
/*
* return hash function on name. must be compatible with the one
* computed a step at a time, elsewhere
*/
int
hashf (name, len, hashsize)
register U_CHAR *name;
register int len;
int hashsize;
{
register int r = 0;
while (len--)
r = HASHSTEP (r, *name++);
return MAKE_POS (r) % hashsize;
}
/* Dump all macro definitions as #defines to stdout. */
dump_all_macros ()
{
int bucket;
for (bucket = 0; bucket < HASHSIZE; bucket++) {
register HASHNODE *hp;
for (hp = hashtab[bucket]; hp; hp= hp->next) {
if (hp->type == T_MACRO) {
register DEFINITION *defn = hp->value.defn;
struct reflist *ap;
int offset;
int concat;
/* Print the definition of the macro HP. */
printf ("#define %s", hp->name);
if (defn->nargs >= 0) {
int i;
printf ("(");
for (i = 0; i < defn->nargs; i++) {
dump_arg_n (defn, i);
if (i + 1 < defn->nargs)
printf (", ");
}
printf (")");
}
printf (" ");
offset = 0;
concat = 0;
for (ap = defn->pattern; ap != NULL; ap = ap->next) {
dump_defn_1 (defn->expansion, offset, ap->nchars);
if (ap->nchars != 0)
concat = 0;
offset += ap->nchars;
if (ap->stringify)
printf (" #");
if (ap->raw_before && !concat)
printf (" ## ");
concat = 0;
dump_arg_n (defn, ap->argno);
if (ap->raw_after) {
printf (" ## ");
concat = 1;
}
}
dump_defn_1 (defn->expansion, offset, defn->length - offset);
printf ("\n");
}
}
}
return NULL;
}
/* Output to stdout a substring of a macro definition.
BASE is the beginning of the definition.
Output characters START thru LENGTH.
Discard newlines outside of strings, thus
converting funny-space markers to ordinary spaces. */
dump_defn_1 (base, start, length)
U_CHAR *base;
int start;
int length;
{
U_CHAR *p = base + start;
U_CHAR *limit = base + start + length;
while (p < limit) {
if (*p != '\n')
putchar (*p);
else if (*p == '\"' || *p =='\'') {
U_CHAR *p1 = skip_quoted_string (p, limit, 0, 0, 0);
fwrite (p, p1 - p, 1, stdout);
p = p1 - 1;
}
p++;
}
}
/* Print the name of argument number ARGNUM of macro definition DEFN.
Recall that DEFN->argnames contains all the arg names
concatenated in reverse order with comma-space in between. */
dump_arg_n (defn, argnum)
DEFINITION *defn;
int argnum;
{
register U_CHAR *p = defn->argnames;
while (argnum + 1 < defn->nargs) {
p = (U_CHAR *) index (p, ' ') + 1;
argnum++;
}
while (*p && *p != ',') {
putchar (*p);
p++;
}
}
/*
* initialize random junk in the hash table and maybe other places
*/
initialize_random_junk ()
{
register int i;
/*
* Set up is_idchar and is_idstart tables. These should be
* faster than saying (is_alpha (c) || c == '_'), etc.
* Must do set up these things before calling any routines tthat
* refer to them.
*/
for (i = 'a'; i <= 'z'; i++) {
++is_idchar[i - 'a' + 'A'];
++is_idchar[i];
++is_idstart[i - 'a' + 'A'];
++is_idstart[i];
}
for (i = '0'; i <= '9'; i++)
++is_idchar[i];
++is_idchar['_'];
++is_idstart['_'];
++is_idchar['$'];
++is_idstart['$'];
/* horizontal space table */
++is_hor_space[' '];
++is_hor_space['\t'];
++is_hor_space['\v'];
++is_hor_space['\f'];
++is_space[' '];
++is_space['\t'];
++is_space['\v'];
++is_space['\f'];
++is_space['\n'];
install ("__LINE__", -1, T_SPECLINE, 0, -1);
install ("__DATE__", -1, T_DATE, 0, -1);
install ("__FILE__", -1, T_FILE, 0, -1);
install ("__VERSION__", -1, T_VERSION, 0, -1);
install ("__TIME__", -1, T_TIME, 0, -1);
install ("__STDC__", -1, T_CONST, 1, -1);
/* install ("__GNU__", -1, T_CONST, 1, -1); */
/* This is supplied using a -D by the compiler driver
so that it is present only when truly compiling with GNU C. */
}
/*
* process a given definition string, for initialization
* If STR is just an identifier, define it with value 1.
* If STR has anything after the identifier, then it should
* be identifier-space-definition.
*/
make_definition (str)
U_CHAR *str;
{
FILE_BUF *ip;
struct directive *kt;
U_CHAR *buf, *p;
buf = str;
p = str;
while (is_idchar[*p]) p++;
if (*p == 0) {
buf = (U_CHAR *) alloca (p - buf + 4);
strcpy (buf, str);
strcat (buf, " 1");
}
ip = &instack[++indepth];
ip->fname = "*Initialization*";
ip->buf = ip->bufp = buf;
ip->length = strlen (buf);
ip->lineno = 1;
ip->macro = 0;
ip->free = 0;
ip->if_stack = if_stack;
for (kt = directive_table; kt->type != T_DEFINE; kt++)
;
/* pass NULL as output ptr to do_define since we KNOW it never
does any output.... */
do_define (buf, buf + strlen (buf) , NULL, kt);
--indepth;
}
/* JF, this does the work for the -U option */
make_undef (str)
U_CHAR *str;
{
FILE_BUF *ip;
struct directive *kt;
ip = &instack[++indepth];
ip->fname = "*undef*";
ip->buf = ip->bufp = str;
ip->length = strlen (str);
ip->lineno = 1;
ip->macro = 0;
ip->free = 0;
ip->if_stack = if_stack;
for (kt = directive_table; kt->type != T_UNDEF; kt++)
;
do_undef (str,str + strlen (str) - 1, NULL, kt);
--indepth;
}
/* Add output to `deps_buffer' for the -M switch.
STRING points to the text to be output.
SIZE is the number of bytes, or 0 meaning output until a null.
If SIZE is nonzero, we break the line first, if it is long enough. */
deps_output (string, size)
char *string;
int size;
{
if (size != 0 && deps_column > 50)
{
deps_output ("\\\n ", 0);
deps_column = 0;
}
if (size == 0)
size = strlen (string);
if (deps_size + size + 1 > deps_allocated_size)
{
deps_allocated_size = deps_size + size + 50;
deps_allocated_size *= 2;
deps_buffer = (char *) xrealloc (deps_buffer, deps_allocated_size);
}
bcopy (string, &deps_buffer[deps_size], size);
deps_size += size;
deps_column += size;
deps_buffer[deps_size] = 0;
}
#ifndef BSD
#ifndef BSTRING
void
bzero (b, length)
register char *b;
register int length;
{
#ifdef VMS
short zero = 0;
long max_str = 65535;
while (length > max_str)
{
(void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b);
length -= max_str;
b += max_str;
}
(void) LIB$MOVC5 (&zero, &zero, &zero, &length, b);
#else
while (length-- > 0)
*b++ = 0;
#endif /* not VMS */
}
void
bcopy (b1, b2, length)
register char *b1;
register char *b2;
register int length;
{
#ifdef VMS
long max_str = 65535;
while (length > max_str)
{
(void) LIB$MOVC3 (&max_str, b1, b2);
length -= max_str;
b1 += max_str;
b2 += max_str;
}
(void) LIB$MOVC3 (&length, b1, b2);
#else
while (length-- > 0)
*b2++ = *b1++;
#endif /* not VMS */
}
int
bcmp (b1, b2, length) /* This could be a macro! */
register char *b1;
register char *b2;
register int length;
{
#ifdef VMS
struct dsc$descriptor_s src1 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b1};
struct dsc$descriptor_s src2 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b2};
return STR$COMPARE (&src1, &src2);
#else
while (length-- > 0)
if (*b1++ != *b2++)
return 1;
return 0;
#endif /* not VMS */
}
#endif /* not BSTRING */
#endif /* not BSD */
void
fatal (str, arg)
char *str, *arg;
{
fprintf (stderr, "%s: ", progname);
fprintf (stderr, str, arg);
fprintf (stderr, "\n");
exit (FATAL_EXIT_CODE);
}
void
perror_with_name (name)
char *name;
{
extern int errno, sys_nerr;
extern char *sys_errlist[];
fprintf (stderr, "%s: ", progname);
if (errno < sys_nerr)
fprintf (stderr, "%s for `%s'\n", sys_errlist[errno], name);
else
fprintf (stderr, "cannot open `%s'\n", sys_errlist[errno], name);
}
void
pfatal_with_name (name)
char *name;
{
perror_with_name (name);
exit (FATAL_EXIT_CODE);
}
void
memory_full ()
{
fatal ("Memory exhausted.");
}
char *
xmalloc (size)
int size;
{
extern char *malloc ();
register char *ptr = malloc (size);
if (ptr != 0) return (ptr);
memory_full ();
/*NOTREACHED*/
}
char *
xrealloc (old, size)
char *old;
int size;
{
extern char *realloc ();
register char *ptr = realloc (old, size);
if (ptr != 0) return (ptr);
memory_full ();
/*NOTREACHED*/
}
char *
xcalloc (number, size)
int number, size;
{
extern char *malloc ();
register int total = number * size;
register char *ptr = malloc (total);
if (ptr != 0)
{
if (total > 100)
bzero (ptr, total);
else {
/* It's not too long, so loop, zeroing by longs.
It must be safe because malloc values are always well aligned. */
register long *zp = (long *) ptr;
register long *zl = (long *) (ptr + total - 4);
register int i = total - 4;
while (zp < zl)
*zp++ = 0;
if (i < 0)
i = 0;
while (i < total)
ptr[i++] = 0;
}
return ptr;
}
memory_full ();
/*NOTREACHED*/
}
/* Get the file-mode and data size of the file open on FD
and store them in *MODE_POINTER and *SIZE_POINTER. */
int
file_size_and_mode (fd, mode_pointer, size_pointer)
int fd;
int *mode_pointer;
long int *size_pointer;
{
struct stat sbuf;
if (fstat (fd, &sbuf) < 0) return (-1);
#ifdef VMS
#ifdef __GNUC__
#ifdef stat_alignment_fix
/* Fix the size data in the stat buffer (this is temporary!) */
sbuf.st_size = (stat_alignment_fix(&(sbuf))->st_size);
#endif stat_alignment_fix
#endif __GNUC__
#endif VMS
if (mode_pointer) *mode_pointer = sbuf.st_mode;
if (size_pointer) *size_pointer = sbuf.st_size;
return 0;
}
#ifdef VMS
/* Under VMS we need to fix up the "include" specification
filename so that everything following the 1st slash is
changed into its correct VMS file specification. */
hack_vms_include_specification (fname)
char *fname;
{
register char *cp, *cp1, *cp2;
char Local[512];
extern char *index (), *rindex ();
/* Ignore leading "./"s */
while (fname[0] == '.' && fname[1] == '/')
strcpy (fname, fname+2);
/* Look for the boundary between the VMS and UNIX filespecs */
cp = rindex (fname, ']'); /* Look for end of dirspec. */
if (cp == 0) cp == rindex (fname, '>'); /* ... Ditto */
if (cp == 0) cp == rindex (fname, ':'); /* Look for end of devspec. */
if (cp) {
cp++;
} else {
cp = index (fname, '/'); /* Look for the "/" */
}
/* See if we found that 1st slash */
if (cp == 0) return; /* Nothing to do!!! */
if (*cp != '/') return; /* Nothing to do!!! */
/* Point to the UNIX filename part (which needs to be fixed!) */
cp1 = cp+1;
/* If the directory spec is not rooted, we can just copy
the UNIX filename part and we are done */
if (((cp - fname) > 2)
&& ((cp[-1] == ']') || (cp[-1] == '>'))
&& (cp[-2] != '.')) {
strcpy (cp, cp1);
return;
}
/* If there are no other slashes then the filename will be
in the "root" directory. Otherwise, we need to add
directory specifications. */
if (index (cp1, '/') == 0) {
/* Just add "[000000]" as the directory string */
strcpy (Local, "[000000]");
cp2 = Local + strlen (Local);
} else {
/* Open the directory specification */
cp2 = Local;
*cp2++ = '[';
/* As long as there are still subdirectories to add, do them. */
while (index (cp1, '/') != 0) {
/* If this token is "." we can ignore it */
if ((cp1[0] == '.') && (cp1[1] == '/')) {
cp1 += 2;
continue;
}
/* Add a subdirectory spec. */
if (cp2 != Local+1) *cp2++ = '.';
/* If this is ".." then the spec becomes "-" */
if ((cp1[0] == '.') && (cp1[1] == '.') && (cp[2] == '/')) {
/* Add "-" and skip the ".." */
*cp2++ = '-';
cp1 += 3;
continue;
}
/* Copy the subdirectory */
while (*cp1 != '/') *cp2++= *cp1++;
cp1++; /* Skip the "/" */
}
/* Close the directory specification */
*cp2++ = ']';
}
/* Now add the filename */
while (*cp1) *cp2++ = *cp1++;
*cp2 = 0;
/* Now append it to the original VMS spec. */
strcpy (cp, Local);
return;
}
#endif /* VMS */
#ifdef VMS
/* These are the read/write replacement routines for
VAX-11 "C". They make read/write behave enough
like their UNIX counterparts that CCCP will work */
int
read (fd, buf, size)
int fd;
char *buf;
int size;
{
#undef read /* Get back the REAL read routine */
register int i;
register int total = 0;
/* Read until the buffer is exhausted */
while (size > 0) {
/* Limit each read to 32KB */
i = (size > (32*1024)) ? (32*1024) : size;
i = read (fd, buf, i);
if (i <= 0) {
if (i == 0) return (total);
return(i);
}
/* Account for this read */
total += i;
buf += i;
size -= i;
}
return (total);
}
int
write (fd, buf, size)
int fd;
char *buf;
int size;
{
#undef write /* Get back the REAL write routine */
int i;
int j;
/* Limit individual writes to 32Kb */
i = size;
while (i > 0) {
j = (i > (32*1024)) ? (32*1024) : i;
if (write (fd, buf, j) < 0) return (-1);
/* Account for the data written */
buf += j;
i -= j;
}
return (size);
}
#endif /* VMS */