# # -------------------------------- # @(#)homebrew.ti 1.2 (1.8 2/10/83) # # homebrew: HOME MADE TERMINALS # bc|bill croft homebrew, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=^Z, cols#96, home=^^, lines#72, cuf1=^L, cuu1=^K, flash=, nucterm|rayterm|nuc|NUC homebrew, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, clear=^L$<1>, lines#24, cols#80, cuf1=^C, cuu1=^N, home=^B, ll=^K, el=^A, ed=^E, carlock|klc, cr=^M, cud1=^J, ind=^J, bel=^G, il1=^E, am, el=^U, clear=^Z$<100>, cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\177, dl1=^D, ed=, rmir=^T, home=^^, smir=^T, lines#24, cuf1=^L, rmso=^V, smso=^V, cuu1=^K, flash=\EV\EV, ex3000, cr=^M, cud1=^J, ind=^J, bel=^G, lines#24, cols#80, home=^Q, exidy|exidy2500|exidy sorcerer as dm2500, cr=^M, cud1=^J, ind=^J, bel=^G, il1=^P^J^X, am, cub1=^H, el=^W, clear=^^, cup=^L%p2%'`'%^%c%p1%'`'%^%c, cols#64, dch1=\b, dl1=^P^Z^X, smdc=^P, ed=^X, rmir=^X, home=^B, ich1=^\, smir=^P, lines#30, cuf1=^\, ht=^I, smso=^N, rmso=^X, cuu1=^Z, sexidy|exidy smart, cr=^M, cud1=^J, ind=^J, bel=^G, lines#24, cols#64, clear=^L, home=^Q, cuf1=^S, cuu1=^W, cub1=^H, cub1=^A, kcud1=^S, # netx and xitex are almost identical, except for the padding # on clear screen. Hmm. xitex|xitex sct-100, cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=^F^E$<2000>, el=^E$<1600>, clear=^L$<400>, cup=\E=%p1%'@'%+%c%p2%'@'%+%c, cols#64, home=^D, lines#16, cuf1=\E+@A, pad=\200, ri=\E=@@^K, cuu1=^K, netx|netronics, cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=^F^E$<2000>, el=^E$<1600>, clear=^L$<466>, cup=\E=%p1%'@'%+%c%p2%'@'%+%c, cols#64, home=^D, lines#16, cuf1=\E+@A, pad=\200, ri=\E=@@^K, cuu1=^K, # Termcap entry for the Netronics Smartvid 80 column terminal. smartvid|Netronics Smartvid 80, cr=^M, cud1=^J, ind=^J, bel=^G, smacs=\EG@, am, rmacs=\EGB, cub1=^H, cbt=\EI, bw, ed=\EY, el=\ET, clear=^L, cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, dch1=\EW, dl1=\ER, cud1=^J, rmir=\ED, eo, home=^Z, ich1=\EQ, smir=\EC, lines#24, ll=^Z^K, msgr, cuf1=^A, rmso=\EG@, xmc#1, smso=\EGC, ri=^K, ht=\Ei, rmcup=^Z^K, rmul=\EG@, ug#1, ui, cuu1=^K, smul=\EGA, cnorm=^Z^K, xhp, # The following termcap for the Netronics Smarterm has been extensively # tested with vi, and seems to work fine: smarterm|smarterm-s|netronics smarterm 80x24 naked terminal, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, am, cub1=^H, cbt=\EI, ed=\EY, el=\ET, clear=^L, cup=\E=%p1%' '%+%c%p2%' '%+%c$<6>, cols#80, cr=^M, dch1=\EW, dl1=\ER, cud1=^J, rmir=\ED, home=^Z, ich1=\EQ, smir=\EC, lines#24, cuf1=^A, nl=^J, ht=^I, rmul=\EG@, ug#1, ul, smul=\EGA, # ???? ubell|ubellchar, if=/usr/lib/tabset/ubell, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ht=^I, el=\Ed, clear=^Z, cup=\E=%p1%' '%+%c%p2%' '%+%c, cols#80, lines#24, cuf1=^L, cuu1=^K, home=^^, ttywilliams, cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#12, cub1=^Y, cud1=^K, cuu1=^Z, clear=^^, el=^_, am, home=^], cuf1=^X,