V6/usr/man/man1/stty.1

Compare this file to the similar file:
Show the results in this format:
.th STTY I 6/12/72
.sh NAME
stty \*- set typewriter options
.sh SYNOPSIS
.bd stty
[ option ... ]
.sh DESCRIPTION
.it Stty
sets certain I/O options on the current output typewriter.
With no argument, it reports the current settings of the options.
The option strings are
selected from the following set:
.s3
.lp +10 10
\fBeven\fR	allow even parity
.lp +10 10
\fB\*-even\fR	disallow even parity
.lp +10 10
\fBodd\fR	allow odd parity
.lp +10 10
\fB\*-odd\fR	disallow odd parity
.lp +10 10
\fBraw\fR	raw mode input
(no erase, kill, interrupt, quit, EOT; parity bit passed back)
.lp +10 10
\fB\*-raw\fR	negate raw mode
.lp +10 10
\fBcooked\fR	same as `\-raw'
.lp +10 10
\fB\*-nl\fR	allow carriage return for new-line,
and output CR-LF for carriage return or new-line
.lp +10 10
\fBnl\fR	accept only new-line to end lines
.lp +10 10
\fBecho\fR	echo back every character typed
.lp +10 10
\fB\*-echo\fR	do not echo characters
.lp +10 10
\fBlcase\fR	map upper case to lower case
.lp +10 10
\fB\*-lcase\fR	do not map case
.lp +10 10
\fB\*-tabs\fR	replace tabs by spaces when printing
.lp +10 10
\fBtabs\fR	preserve tabs
.lp +10 10
\fBek\fR	reset erase and kill characters back to normal # and @.
.lp +10 10
\fBerase\fI c\fR	set erase character to
.it c.
.lp +10 10
\fBkill\fI c\fR	set kill character to
.it c.
.lp +10 10
\fBcr0 cr1 cr2 cr3\fR
.br
select style of delay for carriage return (see below)
.lp +10 10
\fBnl0 nl1 nl2 nl3\fR
.br
select style of delay for linefeed (see below)
.lp +10 10
\fBtab0 tab1 tab2 tab3\fR
.br
select style of delay for tab (see below)
.lp +10 10
\fBff0 ff1\fR
.br
select style of delay for form feed (see below)
.lp +10 10
\fBtty33\fR	set all modes suitable for Teletype model 33
.lp +10 10
\fBtty37\fR	set all modes suitable for Teletype model 37
.lp +10 10
\fBvt05\fR	set all modes suitable for DEC VT05 terminal
.lp +10 10
\fBtn300\fR	set all modes suitable for GE Terminet 300
.lp +10 10
\fBti700\fR	set all modes suitable for Texas Instruments 700 terminal
.lp +10 10
\fBtek\fR	set all modes suitable for Tektronix 4014 terminal
.lp +10 10
\fBhup\fR	hang up dataphone on last close.
.lp +10 10
\fB\-hup\fR	do not hang up dataphone on last close.
.lp +10 10
\fB0\fR	hang up phone line immediately
.lp +10 10
\fB50 75 110 134 150 200 300 600 1200 1800 2400 4800 9600 exta extb\fR
.br
Set typewriter baud rate to the number given, if possible.
(These are the speeds supported by the DH-11 interface).
.s3
.i0
.dt
The various delay algorithms are tuned to various kinds of terminals.
In general the specifications ending in `0' mean no delay for the
corresponding character.
.sh "SEE ALSO"
stty (II)
.sh BUGS