Rugged 1182

[Tim Shoppa]

>I recently picked up a rack mounted computer that is called a "Rugged
>11/82".  One individual I know has suggested that it is a pdp 11/82 is a
>ruggedized box.  Has anyone on this list seen one of these.

I have seen ruggedized 11/83's, as well as "Industrial 11/83"'s, but
it's not clear yet exactly what you have.  The obvious solution
is to look inside and see what Q-bus and/or Unibus boards are present.

>  Is there any
>software in the PUPS archive that might run on one of these?

Some ruggedized PDP-11 systems didn't have a real Q-bus or Unibus backplane
at all, making it very difficult (if not impossible) to use them
with a standard disk controller.  That's why it's vital that you figure
out what exactly is in your machine.

Assuming that the guts are indeed a Q-bus or Unibus KDJ-based CPU,
you'll be able to run 2.11BSD once you get a compatible disk, load,
and console system up and going on it.

-- 
 Tim Shoppa                        Email: shoppa at trailing-edge.com
 Trailing Edge Technology          WWW:   http://www.trailing-edge.com/
 7328 Bradley Blvd		   Voice: 301-767-5917
 Bethesda, MD, USA 20817           Fax:   301-767-5927

Received: (from major at localhost)
	by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id GAA14657
	for pups-liszt; Tue, 8 Dec 1998 06:42:52 +1100 (EST)