[pups] ultrix-3.x install using simh?

[Brad Parker]

Hi,

Has anyone tried to install the ultrix-3.x distribution using simh?

I hacked a little program to build a tape image.  It boots fine.  I told
the ultrix install I wanted to install for an 11/34 on a RL02.  It seems
to install fine and then reboot on the RL02 but hang in the shell after
the boot (see below).

I know using an RL02 with an 34 is optimistic :-) it's just that what I
have for actual hardware.

any idea if this is an simh problem or an ultrix problem or user error?

-brad

output:

...
****** BOOTING ULTRIX-11 SYSTEM TO SINGLE-USER MODE ******

Sizing Memory...  

Boot: rl(0,0)unix    (CTRL/C will abort auto-boot)

rl(0,0)unix: 14784+17026+8192+8000+8064+8192+8128+8128+8128+8192+8192+8064+7744+
6976

ULTRIX-11 Kernel V3.0

realmem = 253952
buffers = 25600
clists  = 1600
usermem = 95232
maxumem = 95232
erase = delete, kill = ^U, intr = ^C