[pups] Supnik Emulator on Redhat Linux

[Toby Thain]

On 23-Mar-06, at 2:57 PM, Robin wrote:

> Ah,
>
> That’s a good suggestion.  I’ll dig my way round the redhat config  
> stuff and see if I can find one to switch off.
>
>

Look at "iptables".

--Toby


>
>
> Robin
>
>
>
> From: Toby Thain [mailto:toby at smartgames.ca]
> Sent: 23 March 2006 06:37
> To: robinb at ruffnready.co.uk
> Subject: Re: [pups] Supnik Emulator on Redhat Linux
>
>
>
>
>
> On 20-Mar-06, at 1:54 PM, Robin wrote:
>
>
>
>
> Hi,
>
> I have successfully got the supnik emulator up and running on  
> redhat but have hit a problem, which is probably configuration and  
> serves to show how little I know about more recent unices.
>
>
>
> To allow computer to emulator comms I have installed a second card  
> and enabled it under linux.  It is enabled with a different address  
> to the first one 192.168.1.10 and 192.168.1.11.  The emulator can  
> see both of the devices and I have attached device 1 (eth1) as xq0.
>
>
>
> I run up BSD2.11 on the emulator and it attaches to the ether  
> device at start up.
>
>
>
> I can ftp from the emulator to the host and back again if I start  
> ftp on the emulator.
>
>
>
> I can’t telnet to the host.
>
>
>
> I can’t telnet from the host to the emulator.
>
>
>
> I can’t ftp from the host to the emulator.
>
>
>
> I also can’t telnet in from a telnet session to the listening  
> socket set up for a DZ11 (I could before I started trying to get  
> the networking up).
>
>
>
> Ideas anyone?
>
>
>
>
>
> Sounds like firewall to me.
>
>
>
> --Toby
>
>
>
>
>
>
> Robin
>
> _______________________________________________
>
> PUPS mailing list
>
> PUPS at minnie.tuhs.org
>
> http://minnie.tuhs.org/mailman/listinfo/pups
>
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://minnie.tuhs.org/pipermail/tuhs/attachments/20060323/0b493886/attachment.html>