[TUHS] SCO OpenDesktop 386 2.0.0

[Arthur Krewat]

And now, get a kernel build error.

Looking at it a bit further in a second.


On 3/1/2017 6:13 PM, Arthur Krewat wrote:
> LOL - I beat you to it :) Just did that, and it's going now.
>
>
>
> On 3/1/2017 6:07 PM, Cory Smelosky wrote:
>> Erase the year and replace it with 99 and you can proceed. Or at 
>> least I could...
>>
>> Sent from my iPhone
>>
>> On Mar 1, 2017, at 15:06, Arthur Krewat <krewat at kilonet.net 
>> <mailto:krewat at kilonet.net>> wrote:
>>
>>> In ESXi 5.0, using the updated HBA driver diskette, I got to this 
>>> point and it locked up apparently (see below). Gotta love Y2K
>>>
>>> <nhcellemnelfkmhb.png>
>>>
>>> On 3/1/2017 5:45 PM, Josh Good wrote:
>>>> I got it to install successfully, in VMware Server 1.0.2.
>>>> The solution is to boot normally with the "id.dd" floppy image provided
>>>> by Corey Lindsly, with the ISO image also provided by Corey configured
>>>> as IDE 0:1 (first channel, slave), and with a virtual IDE disk (I'm
>>>> using 8 GB of size) as 0:0 (first channel, master).
>>>>
>>>> This setup leads to the already known IDE driver hanging. It's a
>>>> problem with the IDE driver provided by SCO with UnixWare 2.1. So,
>>>> when the install process asks whether you want to use a "HBA diskette",
>>>> load into your PC emulator's virtual floppy drive the updated "HBA
>>>> diskette" image provided by SCO for UnixWare 2.1.3, which is here:
>>>> ftp://ftp.sco.com/pub/UW21/upd213/hba213.img
>>>>
>>>> This will stop the UnixWare 2.1 IDE driver from hanging, and the
>>>> install process will proceed successfully to completion.
>>>>
>>>> It should work equally well in VirtualBox.
>>>>
>>>> Regards,
>>>>
>>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://minnie.tuhs.org/pipermail/tuhs/attachments/20170301/ddbc43e3/attachment.html>