[TUHS] 3bsd tape image
Clem Cole
clemc at ccc.com
Thu Aug 31 00:48:31 AEST 2023
Since 3BSD is V7/V32 based - the TZ is sent in the kernel in sys/param.h
and compiled into it.
The system calls and user service calls in section 2 and 3 are seeded from
the value that the kernel returns.
The TZ environment variable was introduced in the PWB / SYS x editions. It
was in PWB 3 and may have been
added before that. I don't remember when the BSD stream picked it up - it
may not have been until after
the original /usr/group 1984 UNIX standard of the early 1980s - which I
codified it in their environ(5) definition.
The team in CSRG for BSD4.2 developed the time modern timezone database
that we see in most UNIX flavors at this time.
I don't remember where tzset(3) call was introduced, to be honest, it was
some time (in years IIRC)
after the TZ environment variable originally was created.
ᐧ
On Wed, Aug 30, 2023 at 7:12 AM KenUnix <ken.unix.guy at gmail.com> wrote:
> Hi all.
>
> Got a question. With 3BSD I have been unable to find where the time zone
> is set. I have looked at
> date.c, time.h and timebuf.h. In the meantime I fixed date.c to handle Y2K
> dates.
>
> I live on the east coast but the date displays the date as: Wed Aug 30
> 06:55:36 *PDT* 2023 Pacific time.
>
> -Ken
>
> On Tue, Aug 29, 2023 at 1:18 PM KenUnix <ken.unix.guy at gmail.com> wrote:
>
>> Hi all. I made a couple of changes to 3bsd-dboot.ini so it will do the
>> loading for you:
>>
>> set tto 7b
>> set rq dis
>> set lpt dis
>> set rl dis
>> set hk dis
>> set rq dis
>> set rqb dis
>> set rqc dis
>> set rqd dis
>> set ry dis
>> set ts dis
>> set tq dis
>> set dz 7b
>> set dz lines=16
>> att dz -m 2311
>> set rp0 rp06
>> at rp0 rp06.disk
>> set tu0 te16
>> D 30000 00009FDE
>> D 30004 D0512001
>> D 30008 D004A101
>> D 3000C 0400C113
>> D 30010 10008F32
>> D 30014 D40424C1
>> D 30018 8FD00CA1
>> D 3001C 80000000
>> D 30020 320800C1
>> D 30024 A1FE008F
>> D 30028 28C1D410
>> D 3002C 14C1D404
>> D 30030 C139D004
>> D 30034 c1d00400
>> D 30038 e1500404
>> D 3003C 00f75007
>> go 30000 <-- Change below this line and note
>> "go 2" has moved
>> expect "Boot" send "hp(0,0)vmunix\r";c
>> expect "#" send "\004\r";c
>> go 2
>>
>> Enjoy...
>>
>> On Mon, Aug 28, 2023 at 7:03 PM Phil Budne <phil at ultimate.com> wrote:
>>
>>> I got curious, and decided to try booting the 3bsd tape image:
>>> >
>>> http://sourceforge.net/projects/bsd42/files/Install%20tapes/3%20BSD/3bsd.tap.bz2/download
>>>
>>> I didn't try building anything
>>>
>>> Install instructions viewable (once installed, or from
>>> https://www.tuhs.org/Archive/Distributions/UCB/3bsd.tar.gz) via:
>>>
>>> nroff -ms /usr/doc/vmunix/newsetup.t
>>>
>>> ================ 3bsd-tboot.ini
>>>
>>> set tto 7b
>>> ; from https://gunkies.org/wiki/Installing_32V_on_SIMH#tboot.ini
>>> set rq dis
>>> set lpt dis
>>> set rl dis
>>> set hk dis
>>> set rq dis
>>> set rqb dis
>>> set rqc dis
>>> set rqd dis
>>> set ry dis
>>> set ts dis
>>> set tq dis
>>> set dz lines=8
>>> set rp0 rp06
>>> at rp0 rp06.disk
>>> set tu0 te16
>>> at tu0 3bsd.tap
>>> D 30000 20009FDE
>>> D 30004 D0512001
>>> D 30008 3204A101
>>> D 3000C C113C08F
>>> D 30010 A1D40424
>>> D 30014 008FD00C
>>> D 30018 C1800000
>>> D 3001C 8F320800
>>> D 30020 10A1FE00
>>> D 30024 00C139D0
>>> D 30028 04c1d004
>>> D 3002C 07e15004
>>> D 30030 0000f750
>>> go 30000
>>> go 0
>>>
>>> ================ installing from tape
>>>
>>> $ ./simh/BIN/vax780 3bsd-tboot.ini
>>>
>>> VAX 11/780 simulator Open SIMH V4.1-0 Current git commit id:
>>> 348f5f29
>>> /media/INTERNAL/SCRATCH/3bsd/3bsd-tboot.ini-17> at tu0 3bsd.tap
>>> %SIM-INFO: TU0: Tape Image '3bsd.tap' scanned as SIMH format
>>>
>>> HALT instruction, PC: 00030033 (HALT)
>>> =mkfs
>>> file sys size: 7942
>>> file system: hp(0,0)
>>> isize = 5072
>>> m/n = 3 500
>>> =restor
>>> Tape? ht(1,1)
>>> Disk? hp(0,0)
>>> Last chance before scribbling on disk. <RETURN>
>>> End of tape
>>> =boot
>>>
>>> Boot
>>> : hp(0,0)vmunix
>>> 61856+61008+70120 start 0x4B4
>>> VM/UNIX (Berkeley Version 2.7) 2/10/80
>>> real mem = 8323072
>>> avail mem = 8062976
>>> ERASE IS CONTROL-H!!!
>>> # ps ax
>>> PID TTY TIME COMMAND
>>> 0 ? 0:17 swapper
>>> 1 ? 0:00 init.vm
>>> 2 ? 0:00 pagedaemon
>>> 3 co 0:00 - (sh)
>>> 7 co 0:00 ps ax
>>> # vmstat
>>> Procs Virtual Real Page Swap Disk
>>> Cpu
>>> RQ DW PW SL SW AVM TX FRE RE PI PO FR DE SR I O D0 D1 D2 CS US
>>> NI SY ID
>>> 0 0 0 3 0 80 5515518 0 0 0 0 0 0.0 0 0 0 0 0 0 0
>>> 0 0100
>>> # chk /dev/rrp0a
>>> icheck /dev/rrp0a
>>> /dev/rrp0a:
>>> files 154 (r=112,d=12,b=8,c=22)
>>> used 1078 (i=28,ii=0,iii=0,d=1050)
>>> free 6545
>>> missing 0
>>> dcheck /dev/rrp0a
>>> /dev/rrp0a:
>>> entries link cnt
>>> 1 0 0
>>> # /etc/mkfs /dev/rrp0g 145673
>>> isize = 65488
>>> (or 43147 on RM03)
>>> m/n = 3 500
>>> # /etc/mount /dev/rp0g /usr
>>> # cd /usr
>>> # cp /dev/rmt5 /dev/null
>>> # cp /dev/rmt5 /dev/null
>>> # tar xvbf 20 /dev/rmt1
>>> x ./adm/msgbuf, 0 bytes, 0 tape blocks
>>> ....
>>>
>>> # dd if=/usr/mdec/uboot of=/dev/rrp0a bs=1b count=1
>>> 1+0 records in
>>> 1+0 records out
>>>
>>> # passwd root
>>> .....
>>> # sync
>>> # sync
>>> # sync
>>> # <CTRL/E>
>>> simh> quit
>>>
>>> ================ 3bsd-dboot.ini
>>>
>>> ; from https://gunkies.org/wiki/Installing_32V_on_SIMH#dboot.ini
>>> ; (just removed attach tu0)
>>> set tto 7b
>>> set rq dis
>>> set lpt dis
>>> set rl dis
>>> set hk dis
>>> set rq dis
>>> set rqb dis
>>> set rqc dis
>>> set rqd dis
>>> set ry dis
>>> set ts dis
>>> set tq dis
>>> set dz 7b
>>> set dz lines=16
>>> att dz -m 2311
>>> set rp0 rp06
>>> at rp0 rp06.disk
>>> set tu0 te16
>>> D 30000 00009FDE
>>> D 30004 D0512001
>>> D 30008 D004A101
>>> D 3000C 0400C113
>>> D 30010 10008F32
>>> D 30014 D40424C1
>>> D 30018 8FD00CA1
>>> D 3001C 80000000
>>> D 30020 320800C1
>>> D 30024 A1FE008F
>>> D 30028 28C1D410
>>> D 3002C 14C1D404
>>> D 30030 C139D004
>>> D 30034 c1d00400
>>> D 30038 e1500404
>>> D 3003C 00f75007
>>> go 30000
>>> go 2
>>>
>>> ================ boot from disk
>>>
>>> $ ./simh/BIN/vax780 3bsd-dboot.ini
>>>
>>> VAX 11/780 simulator Open SIMH V4.1-0 Current git commit id:
>>> 348f5f29
>>> /media/INTERNAL/SCRATCH/3bsd/3bsd-dboot.ini-15> att dz -m 2311
>>> %SIM-INFO: Listening on port 2311
>>> Modem control activated
>>>
>>> HALT instruction, PC: 00030040 (HALT)
>>>
>>> Boot
>>> : hp(0,0)vmunix
>>> 61856+61008+70120 start 0x4B4
>>> VM/UNIX (Berkeley Version 2.7) 2/10/80
>>> real mem = 8323072
>>> avail mem = 8062976
>>> ERASE IS CONTROL-H!!!
>>> # <CTRL/D>
>>> Sat Sep 27 12:51:17 PDT 1980
>>> entering rc
>>> clearing mtab
>>> mounting /usr on /dev/rp0g
>>> preserving Ex temps and clearing /tmp
>>> starting update
>>> starting cron
>>> leaving rc
>>>
>>>
>>>
>>> Virtual VAX/UNIX (Ernie Co-vax)
>>>
>>> login:
>>>
>>> (was able to log in on console
>>> and tty1 via telnet localhost 2311)
>>>
>>>
>>> ================ shutdown from multi-user
>>>
>>> # kill 1
>>> # ERASE IS CONTROL-H!!!
>>> # sync
>>> # sync
>>> # sync
>>> # <CTRL/E>
>>> Simulation stopped, PC: 8000085F (BLBC 80010FA0,8000085F)
>>> sim> q
>>> Goodbye
>>>
>>
>>
>> --
>> End of line
>> JOB TERMINATED
>>
>>
>>
>
> --
> End of line
> JOB TERMINATED
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tuhs.org/pipermail/tuhs/attachments/20230830/8482e915/attachment-0001.htm>
More information about the TUHS
mailing list