2 fas drivers, 1 machine

[Gary Sanders]

Can you install 2 copys of the fas driver in one machines?

What I am trying to do is add a second AST 4 port card and
looking for the best way to do this.

I have 2 AST 4 port cards, 8 bit versions. Right now one is
installed and working fine on irq4/02a0h with fas207, (soon 208). 

Can I run 2 copys of the fas drivers. Set one up on IRQ3 with 01a0 as
the starting address and one on IRQ4 with 02a0 as the start address.
Can I run 2 copys and have the same IRQ with shared address mode set?

Can I reconfigure my current fas driver to start at 01a0 and go up to 02bf
and have a bunch of dummy ports in between the lower and upper 4?

Anyone know of a cheap source for 8 port serial cards.

Many thanks...


-- 
Gary W. Sanders (gws at n8emr or ...!osu-cis!n8emr!gws), 72277,1325
N8EMR @ W8CQK (ip addr) 44.70.0.1 [Ohio AMPR address coordinator]
HAM BBS (1200/2400/9600/V.32/PEP/MNP=L5) 614-895-2553
Voice: 614-895-2552 (eves/weekends)