[pups] Problems booting PDP11/40 using vtserver

Fred N. van Kempen Fred.van.Kempen at microwalt.nl
Tue Feb 5 03:36:47 AEST 2002


.. and I'm actually still alive, although only barely... :)

I'll respond to Michael in email, and summarize here..

--f

> -----Original Message-----
> From: Warren Toomey [mailto:wkt at minnie.tuhs.org]
> Sent: maandag 28 januari 2002 23:09
> To: Michael Werner
> Cc: PUPS mailing list
> Subject: Re: [pups] Problems booting PDP11/40 using vtserver
> 
> 
> In article by Michael Werner:
> > I have my PDP11/40 connected to a MicroVAX 2 (running NetBSD/vax
> > 1.5.2) via serial line and want to boot a 2.9BSD or 2.11BSD 
> using the
> > vtserver software.
> > When I toggle in vtserver's boot code, the first file is 
> being loaded
> > correctly by the PDP. Then, following the instructions in vtserver
> > documentation, the serial line should be used as a serial 
> console - and
> > some text should appear! And this is the problem: I don't 
> get any output.
> > So, my question: Does anybody know what's going wrong here?
> > Thanks in advance - Michi
> 
> I've passed the baton of Vtserver development over to Fred van Kempen.
> However, which version of Vtserver are you using?
> 
> Cheers,
> 	Warren
> _______________________________________________
> PUPS mailing list
> PUPS at minnie.tuhs.org
> http://minnie.tuhs.org/mailman/listinfo/pups
> 


            InterNetworking en Network Security Consultant
   MicroWalt Corporation (Netherlands), Korte Heul 95, 1403 ND BUSSUM
  Phone +31 (35) 6980059 FAX +31 (35) 6980215  http://WWW.MicroWalt.NL/

Dit  bericht  en  eventuele bijlagen is  uitsluitend  bestemd  voor  de
geadresseerde.  Openbaarmaking,   vermenigvuldiging,  verspreiding  aan
derden  is  niet  toegestaan.   Er   wordt   geen  verantwoordelijkheid 
genomen  voor de juiste en  volledige  overbrenging van  de inhoud  van
dit bericht, noch voor de tijdige ontvangst ervan.



More information about the TUHS mailing list