Esix and Colorado Memory Systems "Jumbo" tapedrive

[Martin J. Schedlbauer]

In article <1991Feb9.191226.15362 at ms.uky.edu> jkb at ms.uky.edu (Keith Burton) writes:
>I have a Colorado Memory Systems "Jumbo" 1/4 inch tape drive I'd like to use
>with Esix 3.2D.  I loaded the 1/4 inch streaming tape driver, but it wants 
>some information I don't have, such as address and IRQ number.
>

This is NOT a 1/4" tape drive. It's probably the Jumbo+ using DC2000 or
DC2010 tapes. Unfortunately this unit won't work with Esix using stock 
drivers. Maybe somebody has one for Esix?

There is no IRQ and address, as it uses the same as the floppy controller,
that being the reason for a cable from the J10 controller to the floppy
controller. I used to have one of those and quickly upgraded to a 60MB
Everex Streamer.

	...Martin


-- 
==============================================================================
Martin J. Schedlbauer	| martin at saturn.UUCP	| ...!ulowell!saturn!martin
8 Gilman Road		| mschedlb at ulowell.edu	| ...!uunet!wang!saturn!martin
Billerica, MA 01862 USA	| CIS: 76675, 3364	| /\/\/\/\/\/\/\/\/\/\/\/\/\/\