TUHS May 2014

tuhs@tuhs.org

19 participants
29 discussions

by norman＠nose.cita.utoronto.ca

I've assembled some notes from old manuals and other sources on the formats used for on-disk file systems through the Seventh Edition: http://www.cita.utoronto.ca/~norman/old-unix/old-fs.html Additional notes, comments on style, and whatnot are welcome. (It may be sensible to send anything in the last two categories directly to me, rather than to the whole list.)

3 years, 1 month

32V, 3BSD and 4.0BSD on VAX-11/780

by nao

Hi, I successfully made SIMH VAX-11/780 emulator run 32V, 3BSD and 4.0BSD. Details are on my web site (thogh rather tarse): http://zazie.tom-yam.or.jp/starunix/ Enjoy! Naoki Hamada nao(a)tom-yam.or.jp

9 years, 5 months

Re: [TUHS] Bugs in V6 'dcheck'

by Doug McIlroy

> Ken and Dennis and the other guys behind > the earliest UNIX code were smart guys and good programmers, > but they were far from perfect; and back in those days we > were all a lot sloppier. The observation that exploits may be able to parlay mundane bugs into security holes was not a commonplace back then--even in the Unix room. So input buffers were often made "bigger than ever will be needed" and left that way on the understanding that crashes are tolerable on outlandish data. In an idle moment one day, Dennis fed a huge line of input to most everything in /bin. To the surprise of nobody, including Dennis, lots of programs crashed. We WERE surprised a few years later, when a journal published this fact as a research result. Does anybody remember who published that deep new insight and/or where? Doug

11 years

Bugs in V6 'dcheck'

by jnc＠mercury.lcs.mit.edu

So it turns out the 'dcheck' distributed with V6 has two (well, three, but the third one was only a potential problem for me) bugs it. The first was a fence-post error on a table clearing operation; it could cause the entry for the last inode of the disk in the constructed table of directory entry counts to start with a non-zero count when a second disk was scanned. However, it was only triggered in very specific circumstances: - A larger disk was listed before a smaller one (either in the command line, or compiled in) - The inode on the larger disk corresponding to the last inode on the smaller one was in use I can understand how they never ran across this one. The other one, however, which was an un-initalized variable, should have bitten them anytime they had more than one disk listed! It caused the constructed table of directory entry counts to be partially or wholly (depending on the size of the two disks) blank in all disks after the first one, causing numerous (bogus) error reports. (It was also amusing to find an un-used procedure in the source; it looks like dcheck was written starting with the code for 'icheck' - which explains the second bug; since the logic in icheck is subtly different, that variable _is_ set properly in icheck.) How this bug never bit them I cannot understand - unless they saw it, and couldn't be bothered to find and fix it! To me, it's completely amazing to find such a serious bug in such a critical piece of widely-distributd code! A lesson for archaeologists... Anyway, a fixed version is here: http://ana-3.lcs.mit.edu/~jnc/tech/unix/ucmd/dcheck.c if anyone cares/needs it. Noel

11 years, 1 month

Re: [TUHS] Bugs in V6 'dcheck'

by John Cowan

Larry McVoy scripsit: > I love Rob Pike, he's spot on on a lot of stuff. I'm a big fan of > "if you think you need threads then your processes are too fat". Oh, he's a brilliant fellow. I don't know him personally, but I know people who do, and I don't think I'd love him if I knew him. Humanity has always found it useful to keep its (demi)gods at arm's length at least. -- John Cowan http://www.ccil.org/~cowan cowan(a)ccil.org Barry thirteen gules and argent on a canton azure fifty mullets of five points of the second, six, five, six, five, six, five, six, five, and six. --blazoning the U.S. flag

11 years, 1 month

Re: [TUHS] Bugs in V6 'dcheck'

by jnc＠mercury.lcs.mit.edu

> From: jnc(a)mercury.lcs.mit.edu (Noel Chiappa) > the second (the un-initialized variable) should have happened every > time. OK, so I was wrong! The variable in question was a global static, 'ino' (the current inode number), so the answer isn't something simple like 'it was an auto that happened to be cleared for each disk'. But now that I look closely, I think I see a way it might have worked. 'dcheck' is a two-pass per disk thing: it begins each disk by clearing its 'inode link count' table; then the first pass does a pass over all the inodes, and for ones that are directories, increments counts for all the entries; the second pass re-scans all the inodes, and makes sure that the link count in the inode itself matches the computed count in the table. 'ino' was cleared before the _second_ pass, but not the _first_. So it was zero for the first pass of the first disk, but non-zero for the first pass on the second disk. This looks like the kind of bug that should almost always be fatal, right? That's what I thought at first... (and I tried the original version on one of my machines to make sure it did fail). But... The loop in each pass has two index variables, one of which is 'ino', which it compares with the maximum inode number for that disk (per the super-block), and bails if it reaches the max: for(i=0; ino<nfiles; i =+ NIBLK) If the first disk is _larger_ than the second, the first pass will never execute at all for the second desk (producing errors). However, if the _second_ is larger, then the second disk's first pass will in fact examine the starting (nfilesSUBsecond - nfilesSUBfirst) inodes of the second disk to see if they are directories (and if so, count their links). So if the last nfilesSUBfirst inodes of the second disk are empty (which is often the case with large drives - I had modified 'df' to count the free inodes as well as disk blocks, and after doing so I noticed that Unix seems to be quite generous in its default inode allocations), it will in fact work! The fact that 'ino' is wrong all throughout the first pass of the second disk (it counts up from nfilesSUBfirst to nfilesSUBsecond) turns out to be harmless, because the first pass never uses the current inode number, it only looks at the inode numbers in the directories. Note that with two disks of _equal size_, it fails. Only if the second is larger does it work! (And this generalizes out to N disks - as long as each one is enough larger than the one before!) So for the config they were running (rk2, dp0) it probably did in fact work! Noel

11 years, 1 month

Bugs in V6 'dcheck'

by norman＠oclsc.org

Noel Chiappa: To me, it's completely amazing to find such a serious bug in such a critical piece of widely-distributd code! A lesson for archaeologists... ====== To me it's not surprising at all. On one hand, current examples of widely-distributed critical code containing serious flaws are legion. What, after all, were the Heartbleed and OS X goto fail; bugs? What is every version of Internet Explorer? On the other hand, Ken and Dennis and the other guys behind the earliest UNIX code were smart guys and good programmers, but they were far from perfect; and back in those days we were all a lot sloppier. So surprising? No. Interesting? Certainly. All bugs are interesting. (To me, anyway. Back in the 1980s, when I was at Bell Labs, SP&E published a paper by Don Knuth discussing all the many bugs found in TeX, including some statistical analysis. I thought it fascinating and revealing and think reading it made me a better programmer. Rob Pike thought it was terribly boring and shouldn't have been published. Decidedly different viewpoints.) Norman Wilson Toronto ON

11 years, 1 month

Re: [TUHS] Bugs in V6 'dcheck'

by jnc＠mercury.lcs.mit.edu

> From: Ronald Natalie <ron(a)ronnatalie.com> > If I understand what you are saying, it only occurs when you run dcheck > with mutliple volumes at one time? Right, _both_ bugs have that characteristic. But the first one (the fence-post) only happens in very particular circumstances; the second (the un-initialized variable) should have happened every time. > From: norman(a)oclsc.org (Norman Wilson) > To me it's not surprising at all. > On one hand, current examples of widely-distributed critical code > containing serious flaws are legion. What astonished me was not that there was a bug (which I can easily believe), but that it was one that would have happened _every time they ran it_. 'dcheck' has this list of disks compiled into it. (Oh, BTW, my fixed version now reads a file, /etc/disks; I am running a number of simulated machines, and the compiled-in table was a pain.) So I would have thought they must have at least tried that mode of operation once? And running it that way just once should have shown the bug. Or did they try it, see the bug, and 'dealt' with it by just never running it that way? Noel

11 years, 1 month

Re: [TUHS] Unix on an 11/23 (Was: Work I've done with a PDP-11 simulator)

by jnc＠mercury.lcs.mit.edu

> From: asbesto <asbesto(a)freaknet.org> > We have about 40 disks, with RT-11 on them Ah. You should definitely try Unix - a much more pleasant computing/etc environment! Although without a video editor... although I hope to have one available 'soon', from the MIT V6+ system (I think I have found some backup tapes from it). > This PDP-11/34 was used for a medical CAT equipment As, so it probably has the floating point, then. If so, you should be able to use the Shoppa V6 Unix disk as it is, then - that has a Unix on it which will work on an 11/23 (which don't have the switch register that V6 normally requires). But if not, let me know, and I can provide a V6 Unix for it (I already have the tweaked version running on a /23 in the simulator). Noel PS: For those who downloaded the 'fixed' ctime.c (if anyone :-), it turns out there was a bug in my fix - in some cases, one variable wasn't initialized properly. There's a fixed one up there now.

11 years, 1 month

Re: [TUHS] Unix on an 11/23 (Was: Work I've done with a PDP-11 simulator)

by jnc＠mercury.lcs.mit.edu

> From: asbesto <asbesto(a)freaknet.org> > Just in these days we restored a PDP-11/23PLUS here at our Museum! :) > ... > CPU is working That is good to hear! You all seem to have been very resourceful in making the power supply for it! > and we're trying to boot from a RL02 unit :) Is your RL02 drive and RLV11 controller all working? Here are some interesting pages: http://www.retrocmp.com/pdp-11/pdp-1144/my-pdp-1144/rl02-disk-trouble http://www.retrocmp.com/pdp-11/pdp-1144/my-pdp-1144/more-on-rl01rl02 from someone in Germany about getting their RL11 and RL02 to work. Also, when you say "boot from an RL02", what are you trying to boot? Do you have an RL02 pack with a working system on it? If so, what kind - a Unix of some sort, or some DEC operating system? > From: SPC <spedraja(a)gmail.com> > I'll keep a reference of this message and try it as soon as possible... Speaking of getting Unix to run on an 11/23 with an RL02... I just realized that the hard part of getting a Unix running, for you, will not be getting V6 to run on a machine without a switch register (which is actually pretty easy - I have worked out a way to do it that involves changing one line in param.h, and adding two lines of code to main.c). The hard part is going getting the bits onto the disk! If all you have is an RL02, you are going to have to load bits into the computer over a serial line. WKT has done this for V7 Unix: http://www.tuhs.org/Archive/PDP-11/Tools/Tapes/Vtserver/ but V7 really wants a machine with split I/D (which the /23 does not have). I guess V7 'sort of' works on a machine without I/D, but I'm not a V7 expert, so I can't say for sure. It would not be hard to do something similar to the VTServer thing for V6, though. If you would like to go this way, let me know, I would be very interested in helping with this. Also, do you only have one working RL02 drive, or more than one? If you only have one, you will not be able to do backups (unless you have something else connected to the machine, e.g. some sort of tape drive, or something). Noel

11 years, 1 month

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

TUHS May 2014