TUHS February 2017

tuhs@tuhs.org

72 participants
92 discussions

by jnc＠mercury.lcs.mit.edu

> we just read the second tape, which read without error. ... at this > point we have access to everything that was on that machine. OK, we're starting to get through all the clearances needed to release the non-MIT Unix systems on the machine. (The MIT one is going to take more work - I have to curate out all the personal files.) We have now completed the OK's for the 'Network Unix' (the one done at the University of Illinois for use on the ARPANET, with NCP). A tarball is available here: http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/tmp/nosc.tar (It's called 'nosc.tar' because it came through NOSC, and then SRI, on the way to MIT.) In addition to all the UIllinois code, it also contains early versions of the MH mail reader (from Rand) and the MMDF mailer (from UDel). Enjoy! Noel

7 years, 2 months

Re: [TUHS] // comment in C++

by Doug McIlroy

With no offense intended, I can't help noting the irony of the following paragraph appearing in a message in the company of others that address Unix "bloat". >'\cX' A mechanism that allows usage of the non-printable > (ASCII and compatible) control codes 0 to 31: to cre- > ate the printable representation of a control code the > numeric value 64 is added, and the resulting ASCII > character set code point is then printed, e.g., BEL is > '7 + 64 = 71 = G'. Whereas historically circumflex > notation has often been used for visualization pur- > poses of control codes, e.g., '^G', the reverse > solidus notation has been standardized: '\cG'. Some > control codes also have standardized (ISO 10646, ISO > C) alias representations, as shown above (e.g., '\a', > '\n', '\t'): whenever such an alias exists S-nail will > use it for display purposes. The control code NUL > ('\c@') ends argument processing without producing > further output. Except for the ISO citations, this paragraph says the same thing more succinctly. '\cX' represents a nonprintable character Y in terms of the printable character X whose binary code is obtained by adding 0x40 (decimal 64) to that for Y. (In some historical contexts, '^' plays the role of '\c'.) Alternative standard representations for certain nonprinting characters, e.g. '\a', '\n', '\t' above, are preferred by S-nail. '\c@' (NUL) serves as a string terminator regardless of following characters. And this version, 1/3 the length of the original, tells all one really needs to know. '\cX' represents a nonprintable character Y in terms of the printable character X whose binary code is obtained by adding 0x40 (decimal 64) to that for Y. '\c@' (NUL) serves as a string terminator regardless of following characters. Doug]

7 years, 2 months

// comment in C++

by ron minnich

I've always wondered if this was done in honor of JCL, as sort of a riff on the dd command. Anyone know? ron

7 years, 2 months

Re: [TUHS] Ping times (was: Code bloat)

by Johnny Billquist

On 2017-02-09 20:55, corey(a)lod.com (Corey Lindsly) wrote: > >> In spite of that, I'm typing away to you all, I'm 3ms away from 8.8.8.8 >> (Google's dns server). Go wireless. It's pretty remarkable to be here >> and have decent net connectivity. >> >> I do not yearn for the days of SLIP. >> -- >> --- >> Larry McVoy lm at mcvoy.com http://www.mcvoy.com/lm > 3ms? Really? I'm impressed, and I'd like to see your traceroute. We peer > directly with Google and I get 4-5ms. Do share. Meh. From Uppsala in Sweden I seem to have about 2ms ping time to 8.8.8.8... Psilocybe:update/bqt> ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=56 time=2.10 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=56 time=1.93 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=56 time=2.05 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=56 time=1.89 ms 64 bytes from 8.8.8.8: icmp_req=5 ttl=56 time=2.02 ms 64 bytes from 8.8.8.8: icmp_req=6 ttl=56 time=2.05 ms 64 bytes from 8.8.8.8: icmp_req=7 ttl=56 time=2.00 ms 64 bytes from 8.8.8.8: icmp_req=8 ttl=56 time=1.97 ms 64 bytes from 8.8.8.8: icmp_req=9 ttl=56 time=2.03 ms 64 bytes from 8.8.8.8: icmp_req=10 ttl=56 time=2.10 ms ^C --- 8.8.8.8 ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 9011ms rtt min/avg/max/mdev = 1.894/2.020/2.108/0.067 ms Psilocybe:update/bqt> traceroute 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 r1.n.it.uu.se (130.238.19.254) 1.986 ms 2.324 ms 2.717 ms 2 l-uu-1-b1.uu.se (130.238.6.251) 0.288 ms 0.680 ms 0.646 ms 3 uu-r1.sunet.se (130.242.6.148) 0.686 ms 0.685 ms 0.673 ms 4 uppsala-upa-r1.sunet.se (130.242.4.138) 0.672 ms 0.661 ms 0.657 ms 5 stockholm-fre-r1.sunet.se (130.242.4.26) 3.503 ms 3.468 ms 3.483 ms 6 se-fre.nordu.net (109.105.102.9) 24.456 ms 24.532 ms 24.153 ms 7 se-kst2.nordu.net (109.105.97.27) 1.934 ms 1.902 ms 1.891 ms 8 as15169-te-tc1.sthix.net (192.121.80.47) 2.204 ms 2.189 ms 72.14.196.42 (72.14.196.42) 1.872 ms 9 216.239.40.29 (216.239.40.29) 1.862 ms 1.941 ms 216.239.40.27 (216.239.40.27) 1.995 ms 10 209.85.251.233 (209.85.251.233) 2.398 ms 209.85.245.61 (209.85.245.61) 2.778 ms 72.14.234.85 (72.14.234.85) 2.385 ms 11 google-public-dns-a.google.com (8.8.8.8) 2.372 ms 2.366 ms 2.337 ms Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt(a)softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

7 years, 2 months

Re: [TUHS] How Unix brings people together, or it's a small

by Doug McIlroy

> Lots of commands are now little shells ... > Linux today is much more like the systems > Unix displaced than it is like Unix So depressingly true! Doug

7 years, 2 months

Fwd: Code bloat (was: How Unix brings people together, or it's a small...)

by Nick Downing

Thanks a lot for the tip Paul. It's great that others are working in this area. Although I must say that as a kind of a "historian" I try to go to primary sources where possible. Although I had already converted a fair bit of code in the manner you describe, I am actually re-converting a fair bit of it since I now have a semi-automated system for doing so, that way I get pretty consistent results that aren't reliant on ad-hoc decisions made during porting. Well, good judgement is still needed, but I have a set of mental algorithms for fixing exactly the kinds of questionable constructs you describe, which lead to pretty consistent results. Using my scripts I converted bin, usr.bin and lib of 4.3BSD in a few weeks, although a fair bit of that time was spent on "bin/as" and "bin/sh" and "bin/csh" and other pathological cases. When I have time I will proceed to ucb. I did all subdirectories of bin (things like sed which are multi-module programs) but not usr.bin yet. So what I'll probably do when I get to looking at LSX is to re-convert and then compare against your work, since either of us could quite well have found questionable constructs missed by the other. Also, earlier today I was looking at Noel's page about improving V6: http://mercury.lcs.mit.edu/~jnc/tech/ImprovingV6.html Anyway, I'm much more of a V7 guy and I think I would find V6 strange and compromised, so I am thinking I will definitely have to apply some of these patches, or at least check how much they increase the code size by. At the very least, lseek() and mdate() have to go in, I'm not sure about stdio since having a suite of the standard commands that don't use stdio and hence are smaller/slower might be OK. But probably my preferred approach is to calculate a patch V6 -> Mini Unix or V6 -> LSX and then try to apply that on top of V7. Hmm. As to moving to a V7 kernel and then adding TCP/IP I'm not sure if this is adviseable, as I was saying earlier I think it might be best to keep that functionality outboard from the kernel. The question in my mind is (1) does the Mini Unix / LSX system have to be a fully participating node on the network or can it be a leaf node without any routing, and (2) does it have to respond to ping or incoming connections at any time. Since my scenario is a simple SLIP link to my home server, (1)=No for me. As to (2), I see two scenarios, (a) the machine is used as a development machine, where I run "ed" and "cc" and so on, and occasionally "ftp" or "rcp" as a client only, or (b) the machine is used as a remote node for something like say data logging or web serving, where it runs the same application all the time, and I connect to it to retrieve results and/or download software updates. In case (a) there are only outgoing connections. In case (b) there are incoming connections, but the machine runs the same application all the time, so there's no disadvantage to having TCP in userspace. I don't envisage a more complicated scenario where it runs inetd in the background and a console in the foreground, due to RAM limits. cheers, Nick On Thu, Feb 9, 2017 at 12:56 AM, Paul Ruizendaal <pnr(a)planet.nl> wrote: > Nick, > > If you want to work with LSX, you might have a look at the LSX port I did for the TI990 mini computer: http://1587660.websites.xs4all.nl/cgi-bin/9995/dir?ci=1c38b1fc8792c80b&name… > It is a further development from the work that was done for BKUNIX by Leonid Broukhis (https://sourceforge.net/p/bkunix/code/HEAD/tree/). > > You get stuff converted to a dialect of C acceptable by modern compilers, and some kludges like using 'char*' for 'unsigned' and 'int a[2]' for 'long a' are cleaned up. > > The repository also has a V6 kernel with similar clean up and some V7 compatibility ('lseek' instead of 'seek', etc.). My next step would be to move to a V7 kernel and add TCP/IP capability. This is how I got interested in the history of sockets and TCP/IP. I have found that the BSD stack (as found in e.g. ULTRIX-11) will not fit in 64KB (note: just the network stack). The BBN stack appears to fit in 56KB, with 15KB of buffers available; I think it could be integrated with a V7 kernel as a second kernel process. > > Paul > > On 8 Feb 2017, at 12:21 , Nick Downing wrote: > >> Yes, NetBSD and 386BSD are interesting. They could well form a good >> basis for a minimal but fully functional OS for a modern platform. One >> reservation I have though, is as follows: When 386BSD and its >> derivatives like OpenBSD, NetBSD, FreeBSD came out, Unix was still >> encumbered and thus they had to be based on 4.4BSD Lite (not even >> NET/2 was safe). Nobody made an unencumbered version of say 4.3BSD or >> even NET/2, even though it was theoretically possible, by examining >> what had to be taken out/added to produce 4.4BSD Lite. >> >> Given that Unix is now unencumbered I believe there is no point >> adopting 4.4, or even 4.3Reno, because the main thing done in those >> releases as far as I know, is to add partial POSIX compliance. But if >> you want POSIX compliance you will not achieve minimality. As an >> example consider the BSD sigvec() routine. POSIX calls this >> sigaction(), the old SV_ONSTACK flag becomes SA_ONSTACK, the old >> integer mask becomes a sigset_t and so on... and in any reasonable >> POSIX compliant BSD the two calls are gonna have to coexist, etc. >> >> As to 32V, I appreciate your idea, as I was having some similar >> thoughts myself. However I personally wouldn't use 32V as a basis for >> any serious porting work, because I would assume V7 and 4.3 are much >> more stable and well tested, since they ran in a lot of installations >> over a long time. That's not to denigrate the huge achievement in >> porting V7 to the VAX and producing 32V, but it probably has some >> rough edges that were smoothed out over time to produce the 4BSDs. The >> situation is a bit different for kernel/toolchain/other userspace. >> >> As to the kernel I have been trying to make a detailed comparison >> between 32V and the BSDs, but have been a bit put off by the fact that >> all files moved around and may have been renamed, I will figure it all >> out eventually though. As to the toolchain I have compared it quite >> carefully with 4.3BSD, and I conclude you should use the later >> toolchain as there is no disadvantage and some advantages to doing so. >> As to the rest of the userspace, I BELIEVE that it's stock V7 with any >> 32-bit issues fixed, but I suspect somewhat hastily and superficially. >> >> Producing a 32V-like kernel from 4.3BSD sources would probably be >> quite difficult, it would be relatively easy to disable added system >> calls, but harder to disable things like setpgrp() or the associated >> support in the TTY drivers. More seriously the memory management would >> have to change, I am planning however to make virtual memory optional >> in the 4.3BSD kernel, by maybe putting the 32V code back in, protected >> by #ifndef VM or some such (somewhat like Steven Schultz has done in >> porting 4.3BSD to PDP-11 to produce 2.11BSD). >> >> On the other hand producing a 32V-like userland from the 4.3BSD >> sources would be pretty easy, I think just delete the sources for any >> executables that weren't distributed with 32V and possibly, if any of >> the tools seem particularly bloated, comment out any command line >> switches or features that weren't in 32V. Going to this level of >> effort would likely be pointless though. Another option would be >> taking V7 and re-porting it (except the toolchain) over to a 32-bit >> environment and kernel. I have developed over the past months, tools >> that make this relatively straightforward, and in the process would >> rediscover any 32-bit issues that were fixed in creating 32V. So I >> wouldn't use 32V. >> >> On a slightly different tack, I also have been for some time >> investigating the idea of an Apple II port of Unix, there are massive >> technical issues to be solved, but I think I got a bit closer the >> other night when I decided to collect all information and resources I >> could find about Mini-Unix and LSX (LSI Unix). Both are >> self-supporting V6-based environments, the compiler can only compile >> small programs but it is nonetheless possible for each Unix to >> recomple itself. LSX I believe could run from floppies (dunno about >> 140K floppies) in less than 64K. >> >> So, you know, true minimality is a relative term. We want something >> LSX-like for an Apple II, something 2.11BSD-like for an IBM PC/XT or >> 286 (as Peter Jeremy noted, it's a good fit, and I'd be interested to >> know more), something 4.3BSD-like for a VAX or 386... something a bit >> more fully featured for a modern 64-bit multi-gigabyte system... but >> just not as bloated as what we currently rely on. Hmm well it's hard. >> What I do know, is that I have a lot of old hardware with <16M RAM and >> Linux won't run on it anymore, and this annoys me very greatly. >> >> In talking about FreeBSD/Linux bloat I forgot to mention the packet >> filter, iptables (Linux) or pf (FreeBSD). I have a bit of experience >> with this, since I regularly used to put 2 Ethernet cards in my home >> server and make it Internet facing through one of them and share the >> connection using NAT through the other card. But I've come to the >> conclusion this is stupid, and moreover, that putting a complete >> mini-language into the kernel just for this purpose is utterly stupid. >> Programming the thing from userspace is incredibly intricate, and all >> this complexity serves no purpose. >> >> I recently found out about SLIRP (userspace packet rewriting) and I >> think this would be a good way to implement NAT on servers or routers >> that actually need to do NAT -- just make a userspace process that >> runs something SLIRP-like and has a raw socket to the second Ethernet >> card, and Bob's your uncle. >> >> But this got me thinking along pretty productive lines in terms of the >> tiny Apple II port -- I have been wanting to put the 2.11BSD network >> stack into an Apple II for a long time, but I've now realized this is >> not necessary. A much better approach for those Mini-Unix or LSX or >> even V7 systems, would be to have a userspace library that does SLIP >> and contains its own TCP, UDP, IP drivers, resolver and so on. Then if >> you run a userspace program like say, ftp, which is linked to the >> userspace TCP library, it would basically just open /dev/ttyXX, bring >> up the SLIP link itself, do any necessary downloads etc, then close >> the TTY and stop responding to any IP stuff coming over the SLIP link >> whilst you quit to the prompt, until another program reopens it. >> >> cheers, Nick >> >> On Wed, Feb 8, 2017 at 2:56 PM, Jason Stevens >> <jsteve(a)superglobalmegacorp.com> wrote: >>> What about NetBSD 1.1 or even 386BSD? >>> >>> There never was a 4.2 or 4.3 for i386 was there? >>> >>> I'd guess the 32v userland could be built on early 4.4BSD Lite/NET2 greatly >>> reducing its footprint. >>> >>> >>> >>> >>> On February 8, 2017 11:47:03 AM GMT+08:00, Nick Downing >>> <downing.nick(a)gmail.com> wrote: >>>> >>>> This is an issue that interests me quite a bit, since I was running >>>> FreeBSD in an effort to get around Linux bloat problems discussed. >>>> Well not that I really mind Linux as a user interface / runtime >>>> environment / main development machine, but I think it probably >>>> shouldn't be used as a "least common denominator" for development >>>> since you end up introducing unwanted dependencies on a whole lot of >>>> stuff. >>>> >>>> So I was running FreeBSD as a more minimal *nix. I did quite a lot of >>>> interesting stuff with FreeBSD such as setting up diskless >>>> workstations in my home, etc. I spent a lot of time tinkering around >>>> in the kernel code. I was planning to do some serious development on >>>> 4.4BSDLite or FreeBSD to create an operating system more to my liking. >>>> So, I was looking carefully at differences since ancient *nixes. >>>> >>>> And, I can say that FreeBSD is pretty bloated. Umm well they've added >>>> SMP, at the time it was using the Giant Lock although that could be >>>> fixed by now. They've added VFS and NFS of course. They've added an >>>> entire subsystem for block devices IIRC that handles partitioning and >>>> possibly some other sophisticated stuff, which I believe is their own >>>> design. Umm the kqueues and I believe they have their own >>>> implementation of kernel threading or lightweight processes including >>>> some sort of idle daemon. The network stack is heavily upgraded, to >>>> the extent I looked into it, the added features are things you would >>>> want (syncookies = DOS protection, etc) but also could not possibly be >>>> called minimal, and would preclude running it on other than a >>>> multi-megabyte machine. They have multiple ABIs so the kernel can >>>> accept Linux or BSD syscalls or whatever else (I used it to run >>>> Acrobat Reader Linux on my FreeBSD desktop). Umm I am pretty sure they >>>> have kernel modules ala Linux. Lots and lots and lots of stuff... and >>>> that's only considering the kernel. If you look in the ports >>>> collection you see they have incredible amounts of bloat there too... >>>> for instance GNOME, Libreoffice, LATEX, gcc, python... not that I'm >>>> denigrating these tools, since they do invaluable work and I use them >>>> every day, but the point is, you CANNOT call them minimal. >>>> >>>> The quest for a clean minimal system goes on ->. FreeBSD is not the >>>> answer. In fact I believe 4.3BSD-Reno and 4.4 go strongly offtrack. >>>> >>>> cheers, Nick >>>> >>>> On Wed, Feb 8, 2017 at 1:55 PM, Greg 'groggy' Lehey <grog(a)lemis.com> >>>> wrote: >>>>> >>>>> On Tuesday, 7 February 2017 at 15:38:40 -0800, Steve Johnson wrote: >>>>>> >>>>>> Looking back, the social dynamics of the Unix group helped a lot in >>>>>> keeping the bloat small. The rule was, whoever touches something >>>>>> last becomes its owner. Of course, we were all free to complain >>>>>> about things, and did, but the amalgamation of tinkerings that >>>>>> characterizes most of the Linux commands just didn't happen. >>>>> >>>>> >>>>> Out of interest: where do you (or others) consider that the current >>>>> BSD projects it in this comparison? >>>>> >>>>> Greg >>>>> -- >>>>> Sent from my desktop computer. >>>>> Finger grog(a)lemis.com for PGP public key. >>>>> See complete headers for address and phone numbers. >>>>> This message is digitally signed. If your Microsoft mail program >>>>> reports problems, please read http://lemis.com/broken-MUA >>> >>> >>> -- >>> Sent from my Android device with K-9 Mail. Please excuse my brevity. >

7 years, 2 months

ASCII and UNIX and Model 37 teletypes

by Ron Natalie

DEL, sometimes labeled RUBOUT has a very important feature. It's all ones. When punching a paper tape, if you make a mistake you can mechanically backspace the tape (there's a button on the punch rather than the actual backspace key), you can then press RUBOUT which overpunches the incorrect character. Presumably, whatever system that this was designed for disregards those characters when encountered. Amusingly, we though the HERE IS key was just to generate leaders because none of our teletypes had the drum programmed. Later I found out that you could break the tabs on the drum and have HERE IS send a short string of characters. ^E (called ENQ or sometimes WRU ...for who are you) triggers this to be sent in response. To get back to the UNIX tie in, I actually had for years a Model 37 teletype. This was one of the few terminals that you didn't have to set the nl mode mapping for. It had a large key marked NEWLINE where RETURN usually is and sent ^J (\n) and responded to it the way UNIX expected. In addition it handles all the ESC-8 ESC-9 etc... codes that nroff sent by default without needing a filter. Mine was an ASR so it had the tape unit. It lacked the "greek box" that the one at JHU had to print greek characters after an ^N (shift in). The thing was amusing as it didn't turn on the motor until the modem came ready and when carrier detect was asserted a big green PROCEED light lit on the front. It was quaint, but when I finally got a higher speed modem, I switched back to using a CRT. The Model 37 was a screaming 150 baud. I finally "donated" it to RS who dumped the thing behind someone's car somewhere.

7 years, 2 months

Re: [TUHS] // comment in C++

by jnc＠mercury.lcs.mit.edu

> From: Michael Kjorling > That wouldn't have anything to do with how ^@ is a somewhat common > representation of 000, would it? .. I've always kind of wondered where > that notation came from. Well, CTRL-<*> is usually just the <*> character with the high bits cleared. So, to have a printing representation of NULL, you have two character choices - SPACE, and '@'. Printing "^ " is not so hot, so "^@" is better. Also, if you look at an ASCII table, usually people just take the @-_ column, and use that, since every character in that column has a printing representation. The ' '-? column is missing the ' ', and `-<DEL> is missing the DEL. So if you just take a CTRL character and set the 0100 bit, and print it as "^<char>", you get something readable. (Note that CTRL-' ' _is_ usually used when one needs to _input_ a NUL character.) Noel

7 years, 2 months

Unix stories

by Larry McVoy

Inspired by: > Stephen Bourne after some time wrote a cron job that checked whether an > update in a binary also resulted in an updated man page and otherwise > removed the binary. This is why these programs have man pages. I want to tell a story about working at Sun. I feel like I've sent this but I can't find it in my outbox. If it's a repeat chalk it up to old age. I wanted to work there, they were the Bell Labs of the day, or as close as you could get. I got hired as a contractor through Lachman (anyone remember them?) to do POSIX conformance in SunOS (the 4.x stuff, not that Solaris crap that I hate). As such, I was frequently the last guy to touch any file in the kernel, my fingerprints were everywhere. So when there was a panic, it was frequently laid at my doorstep. So here is how I got a pager and learned about source management. Sun had two guys, who will remain nameless, but they were known as "the SCSI twins". These guys decided, based on feedback that "people can interrupt sun install", to go into the SCSI tape driver and disable SIGINT, in the driver. The kernel model doesn't allow for drivers messing with your signal mask so on exit, sometimes, we would get a "panic: psig". Somehow, I sure was because of the POSIX stuff, I ended up debugging this panic. It had nothing to with me, I'm not a driver person (I've written a few but I pretty much suck at them), but it landed in my lap. Once I figured it out (which was not easy, you had to hit ^C to trigger it so unless you did that, and who does that during an install) I tracked down the code to SCSI twins. No problem, everyone makes mistakes. Oh, wait. Over the next few months I'm tracking down more problems, that were blamed on me since I'm all over the kernel, but came from the twins. Suns integration machines were argon, radon, and krypton. I wrote scripts, awk I think, that watched every update to the tree on all of those machines and if anything came from the SCSI twins the script paged me. That way I could go build and test that kernel and get ahead of the bugs. If I could fix up their bugs before the rest of the team saw it then I wouldn't get blamed for them. I wish I could have figured out something like Steve did that would have made them not screw up so much but this was the next best thing. I actually got bad reviews because of their crap. My boss at the time, Eli Lamb, just said "you are in kadb too much". --lm

7 years, 2 months

Re: [TUHS] Code bloat (was: How Unix brings people together, or it's a small...)

by jnc＠mercury.lcs.mit.edu

> From: Paul Ruizendaal > The best one seems to have been the 3Com stack, which puts IP in the > kernel and TCP in a daemon. I've gotta get the MIT V6 one online. Incoming demux is in the kernel; all of the TCP, and everything else, is in processes along with the application - one process per application instance. It sounds like it might be clunky, but it's not: there are a couple of different TCP's (a small, low performance one for things like User TELNET, timer servers, yadda-yadda; a bigger, higher-performance one for things like FTP), and the application just calls them as subroutine libraries (effectively). Since there's no IPC overhead, the performance is pretty good. Unfortumately, a lot of the stuff never migrated from personal directories to the system folder, so I have to go curate out the personal files (or, more likely, move them all to a system folder) before I can release it all. > Perhaps economizing on fragmentation and and window management is > better. Fragmentation, perhaps - but good window management is a must. > I wonder if just putting the code for this state in the kernel and > handling only the state changes and other states in a daemon is perhaps > the best split on constrained hardware. I don't think that's a good idea; cutting the TCP in two parts, which have to communicate over an interface is going to be _really_ ugly: do you have one copy of the connection state data (in which case one them has to go through an interface to get to it), or two (synchronization issues). If you want a small kernel footprint, take the MIT approach. Noel

7 years, 2 months

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

TUHS February 2017