I was involved in a few supercomputer UNIXes. The one for most obnoxious for writing applications was the Cray X-MP which had only had one numerical data size, 64 bits. The thing had 24 bit pointers. My attempts to guess appropriate sizes in our portable application failed (though it complied). I had sent a junior programmer over to try the port and it printed "You've got to be kidding" when it ran. He calls up and says "I think that's one of your messages." The other port I was intimately familiar with having designed some of the hardware (the I/O system) was the Denelcor HEP. The US Army BRL had this thing built to do fluid dynamics problems. It started out being an analog computer project and then moved to hybrid and finally to an all-digital Multi-Instruction Multi-Data parallel process built all out of 10800 MECL. The neat thing that in addition to running 40 or so concurrent threads it could also keep track of like 1024 threads that it hardware scheduled. Each memory word had a "full-empty" bit that it would semaphore instructions like "Read when Full, Set Empty." Mike Muuss was the head of our group at the time and when the thing was destined to be delivered without an OS, he did his usual "We can put UNIX on it." The brass took us up on the offer. We ported 4.2 BSD to the thing (we'd just come off bringing up a couple of the George Gobel @ Purdue Dual VAXes so we figured we knew our way around the MP aspects). The HEP was the first machine we had four different integral sizes: 8, 16, 32, and 64. We wanted 64 to be the "int" size so we were trying to figure out what to call the 32 bit type. Medium was a prime contender. I suggested "short long." We settled for a new int32 (or some variant keyword). Anyhow, since I was the linker and I/O guy on the project I discovered a hideous bug in 4BSD. The HEP had two addressing modes: character (which is what you'd expect) and "word". The word encoded the word size in the low order bits in an unusual fashion. 0x1000 would be the 64 bit value at 0x1000. 0x1002 would be the 32 bit value at 0x1000. 0x1006 would be the 32 bit value at 0x1004 0x1001,1003,1005, 1007 would be the 16 bit values at 1000, 1002, 1004, and 1006 respectively. 0x1004 gave you a 64 bit value at 0x1000 (for no useful reason). There was places all over the 4BSD kernel where what I call "conversion by union" was taking place. There was a type that looked like this union any { char* c; short * s; int *I; long *l; }; And it would store things into one union accessor and retrieve it from another. This would end up NOT converting the pointer and fun happens when the compiler and the hardware were unclear of the actual word size. I chased down all this nonsense replacing them with void* so that the proper type conversion could be performed. Neat thing about this machine is for I/O it had 32 individual Unibuses gatewayed to it's main memory switch. Initially, the control logic for that used a feature very aptly named "the low speed bus" primarily designed for getting the thing configured to boot up. After realizing that the thing was only doing about ten I/O's a second, we decided we needed to come up with something better. HEP designer Burton Smith and I sat down at the local steak house and literally drew up a new design on the napkins that we could build out of the spares we had lying around.

On 9/17/17, David <david(a)kdbarto.org> wrote: And the tragic irony is that those sorts of cosmetic tricks don't shield you from copyright infringement. -Paul W.