Has anyone tried to install the ultrix-3.x distribution using simh?
I hacked a little program to build a tape image. It boots fine. I told
the ultrix install I wanted to install for an 11/34 on a RL02. It seems
to install fine and then reboot on the RL02 but hang in the shell after
the boot (see below).
I know using an RL02 with an 34 is optimistic :-) it's just that what I
have for actual hardware.
any idea if this is an simh problem or an ultrix problem or user error?
****** BOOTING ULTRIX-11 SYSTEM TO SINGLE-USER MODE ******
Boot: rl(0,0)unix (CTRL/C will abort auto-boot)
ULTRIX-11 Kernel V3.0
realmem = 253952
buffers = 25600
clists = 1600
usermem = 95232
maxumem = 95232
erase = delete, kill = ^U, intr = ^C
Show replies by date