20 Mar
1996
20 Mar
'96
10:16 a.m.
Having met with storming success (thanks Warren) in getting UNIX v6
and v7 up and running on my 11/34, and having recently (well
yesterday) acquired an 11/23+, I'd like to put UNIX on the latter.
Now, the 11/23 has 128Kw, a 10Mb RD51 winchester and an RX50 floppy. I
need to get hold of a version of UNIX (pref. v7) The UNIX in question
obviously needs to support the RD51.
In the case of the 11/34 I built a UNIX image under a PDP-11 emulator
and KERMITed it to the 11/34. I plan to do the same in this case ...
Any suggestions welcome. Does v7 support RD series drives? If not,
what does?
Cheers,
Bob.
--
----------------------------------------------------------------------------
Robert Manners Osney Laboratory
rjm(a)swift.eng.ox.ac.uk Dept of Engineering Science
University of Oxford
01865 288762
Computer Museum: http://swift.eng.ox.ac.uk/rjm/museum.html
Also: http://swift.eng.ox.ac.uk
"The comfort you've demanded is now mandatory" - Jello Biafra
----------------------------------------------------------------------------
20 Mar
20 Mar
11:23 p.m.
In atricle by Bob Manners:
Now, the 11/23 has 128Kw, a 10Mb RD51 winchester and an RX50 floppy. I
need to get hold of a version of UNIX (pref. v7) The UNIX in question
obviously needs to support the RD51.
Does v7 support RD series drives? If not, what does?
v7 doesn't support RDs (just looked thru the archive), and I don't know
of anything that does. You'd probably have to write your own device driver :-(
Warren
From "Steven M. Schultz"
<sms(a)wlv.iipo.gtegsc.com> Thu Mar 21 08:39:32 1996
Received: from
wlv.iipo.gtegsc.com (root(a)WLV.IIPO.GTEGSC.COM [199.107.242.11]) by minnie.cs.adfa.oz.au
(8.6.13/8.3) with ESMTP id IAA29164; Thu, 21 Mar 1996 08:40:25 +1000
Received: (from sms@localhost) by wlv.iipo.gtegsc.com (8.7.4/8.7.3) id OAA28894; Wed, 20
Mar 1996 14:39:32 -0800 (PST)
Date: Wed, 20 Mar 1996 14:39:32 -0800 (PST)
From: "Steven M. Schultz" <sms(a)wlv.iipo.gtegsc.com>
Message-Id: <199603202239.OAA28894(a)wlv.iipo.gtegsc.com>
To: rjm(a)swift.eng.ox.ac.uk, wkt(a)dolphin.cs.adfa.oz.au
Subject: Re: UNIX for 11/23
Cc: oldunix(a)minnie.cs.adfa.oz.au
Hi -
From: wkt(a)dolphin.cs.adfa.oz.au (Warren Toomey)
In article by Bob Manners:
Warren's correct. MSCP support did not enter the 'BSD' picture until
late 2.9BSD or early 2.10BSD. TMSCP support for tapes didn't come
about until early 2.11BSD when I "borrowed" the driver from 4.3BSD
(who had earlier borrowed it from Ultrix).
It should be noted that the MSCP (and to a greater degree TMSCP)
is a *pig* - it's the largest driver in the system, rivaling the
TTY subsystem sizewise.
An 11/23 is already extremely cramped for address space even using
simpler/smaller drivers such as the RK, RL, etc. I seriously doubt
the MSCP driver could be smashed in to a 11/23 kernel and leave room
for too much else.
Steven Schultz
sms(a)wlv.iipo.gtegsc.com
Does v7 support RD series drives? If not, what does?
v7 doesn't support RDs (just looked thru the archive), and I don't know
of anything that does. You'd probably have to write your own device driver :-(
Warren
10264
days inactive
10264
days old
1 comments
2 participants
participants (2)
-
rjm＠swift.eng.ox.ac.uk -
wkt＠dolphin.cs.adfa.oz.au