7 May
2008
7 May
'08
1:33 a.m.
I've just written a Readme to describe how to build the kernel and filesystems,
and to run 1st Edition UNIX. Can a few people who haven't actually used the
system please have a go and give me feedback on the Readme.
To fetch the repository:
svn checkout http://unix-jun72.googlecode.com/svn/trunk/ unix72
Then go into the new unix72/ and read the Readme.
Thanks,
Warren
7 May
7 May
2:35 a.m.
Warren Toomey scripsit:
I've just written a Readme to describe how to
build the kernel and filesystems,
and to run 1st Edition UNIX. Can a few people who haven't actually used the
system please have a go and give me feedback on the Readme.
The misc/KE.diff file does not work with patch. I get this:
/opt/simh$ patch --dry-run --verbose <../unix72/misc/KE.diff
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- makefile.~1~ 2006-07-07 14:50:52.000000000 -0400
|+++ makefile 2008-05-01 10:43:20.000000000 -0400
--------------------------
Patching file makefile using Plan A...
Hunk #1 FAILED at 83.
1 out of 1 hunk FAILED -- saving rejects to file makefile.rej
Hmm... The next patch looks like a unified diff to me...
can't find file to patch at input line 15
Perhaps you should have used the -p or --strip option?
The text leading up to this was:
--------------------------
|--- PDP11/pdp11_defs.h.~1~ 2006-07-06 11:33:30.000000000 -0400
|+++ PDP11/pdp11_defs.h 2008-05-01 11:12:57.000000000 -0400
--------------------------
File to patch:
--
"Well, I'm back." --Sam John Cowan <cowan(a)ccil.org>
3:05 a.m.
The misc/KE.diff file does not work with patch. I get
this:
I updated the KE.diff. Let me know if you still have problems.
"Well, I'm back." --Sam John
Cowan <cowan(a)ccil.org>
Tim Newsham
http://www.thenewsh.com/~newsham/
5:11 a.m.
Tim Newsham scripsit:
Okay. As of revision 200, everything works provided you unzip -a the
simh zipfile and mkdir the BIN directory.
--
John Cowan cowan(a)ccil.org http://ccil.org/~cowan
If a traveler were informed that such a man [as Lord John Russell] was
leader of the House of Commons, he may well begin to comprehend how the
Egyptians worshiped an insect. --Benjamin Disraeli
The
misc/KE.diff file does not work with patch. I get this:
I updated the KE.diff. Let me know if you still have problems.
3:29 a.m.
New subject: [Unix-jun72] simh patch fails
On Tue, May 06, 2008 at 10:35:49PM -0400, John Cowan wrote:
The misc/KE.diff file does not work with patch. I get
this:
Looks like Simh unpacks with lots of ^Ms. Tim has updated the patch.
I've updated the Readme:
1. Download the source code for the Simh simulator from here:
http://simh.trailing-edge.com/. Unpack it somewhere.
2. Copy misc/pdp11_ke.c into the Simh PDP11/ directory, and apply
the misc/KE.diff patch to the source code:
patch -l < misc/KE.diff
3. In Simh, make the BIN/ directory. Do make pdp11 to make the pdp11 simulator.
Copy the BIN/pdp11 executable into the tools/ directory.
Warren
2:44 a.m.
Warren,
I've been watching the activity with great interest and have been dying
to try it out. I will give this a spin.
Jim
Warren Toomey wrote:
I've just written a Readme to describe how to
build the kernel and filesystems,
and to run 1st Edition UNIX. Can a few people who haven't actually used the
system please have a go and give me feedback on the Readme.
To fetch the repository:
svn checkout http://unix-jun72.googlecode.com/svn/trunk/ unix72
Then go into the new unix72/ and read the Readme.
Thanks,
Warren
_______________________________________________
Unix-jun72 mailing list
Unix-jun72(a)tuhs.org
https://minnie.tuhs.org/mailman/listinfo/unix-jun72
3:36 a.m.
Warren,
The hardest part was patching and compiling simh under Linux. I have
edited the various files by hand and have attached a new KE.diff.
Also, the build failed at tools/assemv2. I had to supply the files names
by hand:
root@linux:/var/files/unix72# tools/assemv2
rebuilding...
patching...
vec0407
initorig
v2_as
missing header for unified diff at line 3 of patch
The text leading up to this was:
--------------------------
|--- u0.s Wed May 7 01:20:13 2008
|+++ ../a/u0.s Wed May 7 01:19:38 2008
--------------------------
File to patch:
When I supplied the file names, u0.s, u1.s, u5.s, and ux.s, it patched
them just fine and I was able to finish the process without a hitch.
Very cool!
Jim
Warren Toomey wrote:
I've just written a Readme to describe how to
build the kernel and filesystems,
and to run 1st Edition UNIX. Can a few people who haven't actually used the
system please have a go and give me feedback on the Readme.
To fetch the repository:
svn checkout http://unix-jun72.googlecode.com/svn/trunk/ unix72
Then go into the new unix72/ and read the Readme.
Thanks,
Warren
_______________________________________________
Unix-jun72 mailing list
Unix-jun72(a)tuhs.org
https://minnie.tuhs.org/mailman/listinfo/unix-jun72
3:43 a.m.
On Tue, May 06, 2008 at 11:36:41PM -0400, Jim Capp wrote:
The hardest part was patching and compiling simh under
Linux. I have
edited the various files by hand and have attached a new KE.diff.
Jim, Tim & I have fixed a few things up. Could you clean out your Simh
build, re-fetch the svn tree from scratch, and try again? The Readme is
also updated.
Thanks for testing it when it was (is?) on the bleeding edge though!
Warren
3:59 a.m.
Warren,
I just did a new checkout of unix72 and it build like a charm!!!
I will go back and test the simh build again with the new instructions.
Cheers,
Jim
Warren Toomey wrote:
On Tue, May 06, 2008 at 11:36:41PM -0400, Jim Capp
wrote:
The hardest part was patching and compiling simh
under Linux. I have
edited the various files by hand and have attached a new KE.diff.
Jim, Tim & I have fixed a few things up. Could you clean out your Simh
build, re-fetch the svn tree from scratch, and try again? The Readme is
also updated.
Thanks for testing it when it was (is?) on the bleeding edge though!
Warren
_______________________________________________
Unix-jun72 mailing list
Unix-jun72(a)tuhs.org
https://minnie.tuhs.org/mailman/listinfo/unix-jun72
4:01 a.m.
Oh, and I see you've fixed the control-J problem. It starts right up to
a :login: prompt.
Warren Toomey wrote:
On Tue, May 06, 2008 at 11:36:41PM -0400, Jim Capp
wrote:
The hardest part was patching and compiling simh
under Linux. I have
edited the various files by hand and have attached a new KE.diff.
Jim, Tim & I have fixed a few things up. Could you clean out your Simh
build, re-fetch the svn tree from scratch, and try again? The Readme is
also updated.
Thanks for testing it when it was (is?) on the bleeding edge though!
Warren
_______________________________________________
Unix-jun72 mailing list
Unix-jun72(a)tuhs.org
https://minnie.tuhs.org/mailman/listinfo/unix-jun72
5:22 a.m.
Will do, when I've a spare few hours to mess around with it. That
might be in a day or so.
On Tue, May 6, 2008 at 6:33 PM, Warren Toomey <wkt(a)tuhs.org> wrote:
I've just written a Readme to describe how to
build the kernel and filesystems,
and to run 1st Edition UNIX. Can a few people who haven't actually used the
system please have a go and give me feedback on the Readme.
To fetch the repository:
svn checkout http://unix-jun72.googlecode.com/svn/trunk/ unix72
Then go into the new unix72/ and read the Readme.
Thanks,
Warren
_______________________________________________
Unix-jun72 mailing list
Unix-jun72(a)tuhs.org
https://minnie.tuhs.org/mailman/listinfo/unix-jun72
--
Johan Beisser
UNIX Contracting: infrastructure design, network security, disaster
planning and recovery
8:40 a.m.
On Wed, May 07, 2008 at 11:33:59AM +1000, Warren Toomey wrote:
Then go into the new unix72/ and read the Readme.
On OS X 10.5.3
simh builds fine however:
building apout fails (everything else in tools compiles) with:
luthien:apout pao$ make
gcc -Wall -g -DEMU211 -DEMUV1 -DNATIVES -DDEBUG -DZERO_MEMORY
-DWRITEBASE -c -o aout.o aout.c
In file included from aout.c:7:
defines.h:87: error: conflicting types for 'int8_t'
/usr/include/i386/types.h:78: error: previous declaration of 'int8_t'
was here
defines.h:89: error: conflicting types for 'int32_t'
/usr/include/i386/types.h:88: error: previous declaration of 'int32_t'
was here
defines.h:92: error: conflicting types for 'u_int32_t'
/usr/include/i386/types.h:90: error: previous declaration of 'u_int32_t'
was here
make: *** [aout.o] Error 1
Paul
9:28 a.m.
On Wed, May 07, 2008 at 09:40:43AM +0100, P.A.Osborne wrote:
On OS X 10.5.3
simh builds fine however:
building apout fails (everything else in tools compiles) with:
Thanks Paul, I'll try to fix it tomorrow. Is there a compiler defined
preprocessor symbol that I can add which covers OSX. For example:
#if !defined(__FreeBSD__) && !defined(__NetBSD__) && \
!defined(__OpenBSD__) && !defined(__linux__)
# define NEED_INT_N
#endif
Is there __OSX__ or similar? If there is, simply add
&& !defined(__OSX__)
to that second line, which is around line 71 in tools/apout/defines.h.
Thanks,
Warren
10:19 a.m.
On Wed, May 07, 2008 at 07:28:42PM +1000, Warren Toomey wrote:
Is there __OSX__ or similar? If there is, simply add
&& !defined(__OSX__)
to that second line, which is around line 71 in tools/apout/defines.h.
Warren,
__APPLE__ does part of the trick, then we get:
cc -static -g aout.o branch.o bsd_ioctl.o bsd_signal.o bsdtrap.o cpu.o
debug.o double.o ea.o fp.o itab.o ke11a.o magic.o main.o single.o
v1trap.o v7trap.o -o apout -lm
ld_classic: can't locate file for: -lcrt0.o
collect2: ld returned 1 exit status
make[1]: *** [apout] Error 1
At this point I am in the midst of Apple butchering tools to produce
universal binaries (powerpc and x64), will continue to swear at this
(or just give in and install FreeBSD under VMWare :-) ).
Paul
2:11 p.m.
On 7 May 2008, at 11:19, P.A.Osborne wrote:
On Wed, May 07, 2008 at 07:28:42PM +1000, Warren
Toomey wrote:
Remove the -static
Regards, Rob.
Is there __OSX__ or similar? If there is, simply
add
&& !defined(__OSX__)
to that second line, which is around line 71 in tools/apout/
defines.h.
Warren,
__APPLE__ does part of the trick, then we get:
cc -static -g aout.o branch.o bsd_ioctl.o bsd_signal.o bsdtrap.o cpu.o
debug.o double.o ea.o fp.o itab.o ke11a.o magic.o main.o single.o
v1trap.o v7trap.o -o apout -lm
ld_classic: can't locate file for: -lcrt0.o
collect2: ld returned 1 exit status
make[1]: *** [apout] Error 1
At this point I am in the midst of Apple butchering tools to produce
universal binaries (powerpc and x64), will continue to swear at this
(or just give in and install FreeBSD under VMWare :-) ).
Paul
5833
days inactive
5833
days old
17 comments
7 participants
participants (7)
-
Jim Capp -
Johan Beisser -
John Cowan -
P.A.Osborne -
Robert Tillyard -
Tim Newsham -
Warren Toomey