I was looking for that a few years back. Dennis Ritchie's home pages have some info on this (https://www.bell-labs.com/usr/dmr/www/odd.html). At the bottom of that page he writes: ""Back around 1970-71, Unix on the PDP-11/20 ran on hardware that not only did not support virtual memory, but didn't support any kind of hardware memory mapping or protection, for example against writing over the kernel. This was a pain, because we were using the machine for multiple users. When anyone was working on a program, it was considered a courtesy to yell "A.OUT?" before trying it, to warn others to save whatever they were editing. [..snip..] We knew the PDP-11/45, which did support memory mapping and protection for the kernel and other processes, was coming, but not instantly; in anticipation, we arranged with Digital Special Systems to buy a PDP-11/20 with KS-11 add-on. This was an extra system unit bolted to the processor that made it distinguish kernel from user mode, and provided a classical PDP-10 style "hi-seg" "low-seg" memory mapping unit. I seem to recall that maybe 6 of these had been made when we ordered it."" My hypothesis is that the very first versions of Unix were using a memory scheme similar to that used in the later LSX and MX derivatives: the kernel resides in lower memory and the user program in upper memory; each process switch implied a swap. Disclaimer: I have not studied the V0 source to verify this hypothesis. When this topic had my interest I looked for (but did not find) information on what ""the classical PDP-10 style "hi-seg" "low-seg" memory mapping unit"" was. Here my hypothesis would be that in kernel mode mapping was off, and that in user mode there were two segments, each with a base and limit into physical memory -- and that this setup has an echo in how the later KL-11 MMU was used. Does anyone have an idea what PDP-10 MMU Dennis may have been referring to?