5 Jan
2016
5 Jan
'16
8:35 p.m.
On 2016-01-05 18:43, Ronald Natalie<ron(a)ronnatalie.com> wrote:
Just never figured out how to make good use of the MARK instruction on the PDP-11.
Not surprising. As others noted, few ever did. And apparently none
responding actually do either.
It *is* a stupid instruction in many ways. And it's not for multiple
returns either.
It's an odd way of handling stack cleanup without a frame pointer.
It's extremely bad, since it actually requires the stack to be in
instruction space. And yes, you are expected to execute on the stack.
The idea is that the caller pushes arguments on the stack, but the
cleanup of the stack is implicitly done in the subroutine itself, and at
the same time you get an argument pointer.
Example:
Calling:
MOV R5,-(SP) ; Save old R5
MOV <argn>,-(SP)
MOV <argn-1>,-(SP)
.
MOV <arg1>,-(SP)
MOV #MARKN,-(SP) ; Where the N in MARK N is the number of
arguments you just pushed.
MOV SP,R5
JSR PC,SUB
.
.
In the subroutine you then have the arguments available relative to R5.
So that arg1 is available at 2(R5) for example.
SUB: .
.
.
RTS R5
There is a lot going on at this point. The trick is to note that the
code does an RTS R5 to return. If people remember what happens at that
point, PC gets loaded with R5, while R5 gets loaded with the PC that we
actually would like to return to (since that's what is at the top of the
stack).
And R5 is pointing into the stack, at the MARK instruction, so execution
continues with actually performing the MARK.
MARK, in turn, will case SP <- PC + 2*N, thus restoring the stack
pointer to point to the place where the original R5 was stored.
Next, it does a PC <- R5, so that we now have the PC point to where we
actually want to return.
Next it does a R5 <- (SP)+, meaning we actually restored the original R5.
And so we have cleaned up the stack, preserved R5, and returned to the
caller again.
Also notice that the subroutine could have pushed any amount of data on
the stack before the return, and I suspect the idea was that the process
would not have needed to clean that up either. However, that fails,
since the RTS needs the return address at the top. But you can
essentially solve that by pushing -2(R5) before returning.
Ugly, isn't it? :-)
Johnny
5 Jan
5 Jan
11:04 p.m.
New subject: PDP-11 MARK (was: Early Unix function calls: expensive?)
On Tuesday, 5 January 2016 at 21:35:47 +0100, Johnny Billquist wrote:
On 2016-01-05 18:43, Ronald
Natalie<ron(a)ronnatalie.com> wrote:
Thanks for the (omitted) explanation. At first sight, the instruction
almost seems to make sense for functions with a variable number of
parameters, but of course there are simpler ways to do it.
I wonder if this is a case of "it sounded like a good idea at the
time" (when the instruction set was being designed), and it took a
while for people to realize that it wasn't of any use.
I recall a similar issue with the Siemens 306, their first stack-based
machine, round about 1975. They had function call and return
instructions which manipulated the stack pointer, but it seemed that
nobody used them: they didn't work. From memory, the call instruction
incremented the stack pointer and stored PC. The return call
instruction decemented the stack pointer and loaded PC--from the wrong
location.
I never used the 306 myself, but I often wondered if they modified one
of the instructions to DTRT.
Greg
--
Sent from my desktop computer.
Finger grog(a)FreeBSD.org for PGP public key.
See complete headers for address and phone numbers.
This message is digitally signed. If your Microsoft MUA reports
problems, please read http://tinyurl.com/broken-mua
Just never figured out how to make good use of the MARK instruction on the PDP-11.
Not surprising. As others noted, few ever did. And apparently none
responding actually do either.
It *is* a stupid instruction in many ways. And it's not for multiple
returns either.
It's an odd way of handling stack cleanup without a frame pointer.
11:20 p.m.
New subject: PDP-11 MARK
On 2016-01-06 00:04, Greg 'groggy' Lehey wrote:
On Tuesday, 5 January 2016 at 21:35:47 +0100, Johnny
Billquist wrote:
Definitely. Like how most compilers do - the caller cleans the stack
afterwards, if we have a system where a variable number of arguments are
allowed and not indicated in other ways. Not to mention explicit
cleaning up of the stack in the function before the return as well.
On 2016-01-05 18:43, Ronald
Natalie<ron(a)ronnatalie.com> wrote:
Thanks for the (omitted) explanation. At first sight, the instruction
almost seems to make sense for functions with a variable number of
parameters, but of course there are simpler ways to do it.
Just never figured out how to make good use of the MARK instruction on the PDP-11.
Not surprising. As others noted, few ever did. And apparently none
responding actually do either.
It *is* a stupid instruction in many ways. And it's not for multiple
returns either.
It's an odd way of handling stack cleanup without a frame pointer. I wonder if this is a case of "it sounded like a
good idea at the
time" (when the instruction set was being designed), and it took a
while for people to realize that it wasn't of any use.
Probably not. This ties in with an old (urban) myth about the PDP-11.
The MARK instruction was not in the basic, original instruction set. It
came about in one of the extensions that were done. And one story behind
it was that it was "invented" in order to copyright, or somehow protect
the instruction set for a few years more.
(I think it came at the same time as SOB, and the EIS stuff, but I don't
remember for sure...)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt(a)softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
6 Jan
6 Jan
12:54 a.m.
New subject: PDP-11 MARK
The MARK instruction was not in the basic, original instruction set. It came about in one
of the extensions that were done. And one story behind it was that it was
"invented" in order to copyright, or somehow protect the instruction set for a
few years more.
(I think it came at the same time as SOB, and the EIS stuff, but I don't remember
for sure...)
Maybe it was because someone named Mark at DEC was an SOB?
3042
days inactive
3043
days old
3 comments
3 participants
participants (3)
-
Greg 'groggy' Lehey -
Johnny Billquist -
Ronald Natalie