13 Oct
2019
13 Oct
'19
7:53 p.m.
I was reminded of this by Larry's comment:
I miss Brian on this list. I've interacted with
him over the years, the
one I remember the most was I was trying to do an awk like interface to a
key/value "database".
Recently I've had to deal with a lot of data in CSV
(comma-separated-value) format. Awk is *almost* prefect for this, but
of course doesn't handle the quoting of fields that contain commas.
One can usually work around it by finding a character that doesn't
occur in the data and converting the CSV file to use that as the
separator, but it's not ideal.
Awk's input could easily be modified to handle CSV files, but output
would be a bit more difficult, because you don't specify field
boundaries explicitly on output. One possibility would be a printf()
format specifier that takes a field and quotes it appropriately.
-- Richard
--
The University of Edinburgh is a charitable body, registered in
Scotland, with registration number SC005336.
13 Oct
13 Oct
8:57 p.m.
Awk and csv isn't new. Googling 'awk csv' gets you a bunch of results.
There is also the 'csv' dynamically loadable extension for gawk to
be found in the gawkextlib project. Contact me off-list if you want
more details.
Thanks,
Arnold
Richard Tobin <richard(a)inf.ed.ac.uk> wrote:
I was reminded of this by Larry's comment:
I miss Brian on this list. I've interacted
with him over the years, the
one I remember the most was I was trying to do an awk like interface to a
key/value "database".
Recently I've had to deal with a lot of data in CSV
(comma-separated-value) format. Awk is *almost* prefect for this, but
of course doesn't handle the quoting of fields that contain commas.
One can usually work around it by finding a character that doesn't
occur in the data and converting the CSV file to use that as the
separator, but it's not ideal.
Awk's input could easily be modified to handle CSV files, but output
would be a bit more difficult, because you don't specify field
boundaries explicitly on output. One possibility would be a printf()
format specifier that takes a field and quotes it appropriately.
-- Richard
--
The University of Edinburgh is a charitable body, registered in
Scotland, with registration number SC005336. 
14 Oct
14 Oct
12:46 a.m.
Today, working with v7m, SVR1, and bsd2.11 all PDP11 ports, for example, will stay booted
and operational for long periods under simulation.
With these older UNIX variants, working with awk and even the classic shell tools is often
problematic. Moreover resource constraints seem to be a persistent annoyance under
simulation.
When dealing with even moderately sized text files, one is often left with writing a C
program to ameliorate the limitations of any attempt to exclusively use awk, and the other
classic shell tools. It’s not a leap to suggest that users running UNIX on actual metal
instead of simulation faced the same resource challenges.
Holy cow have things changed. Today, awk, and the other classic shell tools are amazing.
Resource limitations are rare or even non-existent, especially so in the Cloud. Google
seems to have led the way into taming unstructured data. Even email today is virtually
one huge text stream where it’s binary element is masked by even more text. Text, text,
text! All of this text data (CSV or whatever) has paved the way and extended the
meaningful life of the classic shell tools and even newer tools that are now
classics—-especially when an RDB is involved.
Just don’t hit that null or you might need to ameliorate with C again.
Truly,
Bill Corcoran
On Oct 13, 2019, at 10:35 AM, Richard Tobin
<richard(a)inf.ed.ac.uk> wrote:
I was reminded of this by Larry's comment:
I miss Brian on this list. I've interacted
with him over the years, the
one I remember the most was I was trying to do an awk like interface to a
key/value "database".
Recently I've had to deal with a lot of data in CSV
(comma-separated-value) format. Awk is *almost* prefect for this, but
of course doesn't handle the quoting of fields that contain commas.
One can usually work around it by finding a character that doesn't
occur in the data and converting the CSV file to use that as the
separator, but it's not ideal.
Awk's input could easily be modified to handle CSV files, but output
would be a bit more difficult, because you don't specify field
boundaries explicitly on output. One possibility would be a printf()
format specifier that takes a field and quotes it appropriately.
-- Richard
--
The University of Edinburgh is a charitable body, registered in
Scotland, with registration number SC005336.
1:36 a.m.
On Sun, 13 Oct 2019 at 14:54, William Corcoran <wlc(a)jctaylor.com> wrote:
Today, working with v7m, SVR1, and bsd2.11 all PDP11
ports, for example,
will stay booted and operational for long periods under simulation.
This has certainly been my experience as well with mature, for the era, BSD
ports. Most of the problems I have encountered have been with TCP/IP
issues in 2.11BSD and Ultrix 3.1 related to traffic they were never
expecting.
With these older UNIX variants, working with awk and
even the classic
shell tools is often problematic. Moreover resource constraints seem to be
a persistent annoyance under simulation.
I think our expectations of a 16 bit Unix are going to be well out of
proportion now. When 16 and 32 bit Unix systems existed side by side it
was easy to consider the resource limitations of both when programming.
Now that 16 bit systems have moved completely out of general end user space
we only consider the constraints of the 32 and 64 bit systems that exist
side by side.
Some of my interests lie in preserving early '90s hardware with original
operating systems, and working within their constraints. Porting modern
tools to SunOS 4 or Ultrix 4 or IRIX 4 (huh, everyone really was stuck on
the same version) is a challenge but it can be done, as long as those tools
do not necessarily rely on shared libraries. Backporting C99 to C89 is
often not as difficult as it would seem, though it can sometimes be
laborious. On the other hand, porting modern tools to my PDP 11/23 running
2.9BSD is a total non-starter for reasons that I am sure I do not have to
elaborate upon here.
-Henry
4:30 a.m.
Agreed. Although it seems like a lot of these processor “bits” beyond 32 are now put to
use into senseless saccharin AI endeavors like autocorrect. I type “its” and it comes out
as “it’s” when clearly it should have been “its” and it’s depressing, even more so when I
miss it.
Truly,
Bill Corcoran
On Oct 13, 2019, at 3:36 PM, Henry Bent
<henry.r.bent@gmail.com<mailto:henry.r.bent@gmail.com>> wrote:
On Sun, 13 Oct 2019 at 14:54, William Corcoran
<wlc@jctaylor.com<mailto:wlc@jctaylor.com>> wrote:
Today, working with v7m, SVR1, and bsd2.11 all PDP11 ports, for example, will stay booted
and operational for long periods under simulation.
This has certainly been my experience as well with mature, for the era, BSD ports. Most
of the problems I have encountered have been with TCP/IP issues in 2.11BSD and Ultrix 3.1
related to traffic they were never expecting.
With these older UNIX variants, working with awk and even the classic shell tools is often
problematic. Moreover resource constraints seem to be a persistent annoyance under
simulation.
I think our expectations of a 16 bit Unix are going to be well out of proportion now.
When 16 and 32 bit Unix systems existed side by side it was easy to consider the resource
limitations of both when programming. Now that 16 bit systems have moved completely out
of general end user space we only consider the constraints of the 32 and 64 bit systems
that exist side by side.
Some of my interests lie in preserving early '90s hardware with original operating
systems, and working within their constraints. Porting modern tools to SunOS 4 or Ultrix
4 or IRIX 4 (huh, everyone really was stuck on the same version) is a challenge but it can
be done, as long as those tools do not necessarily rely on shared libraries. Backporting
C99 to C89 is often not as difficult as it would seem, though it can sometimes be
laborious. On the other hand, porting modern tools to my PDP 11/23 running 2.9BSD is a
total non-starter for reasons that I am sure I do not have to elaborate upon here.
-Henry
1679
days inactive
1679
days old
4 comments
4 participants
participants (4)
-
arnold＠skeeve.com -
Henry Bent -
Richard Tobin -
William Corcoran