26 Jun
2009
26 Jun
'09
1:57 a.m.
Well, the matter is simple: I'm trying to install 2.11 BSD in one PDP-11/23
PLUS with 4MB of ram, and the 'restor' and 'icheck' utilities
don't load in
he PDP, returning this message:
"Can't load split I&D files"
I tried with the diverse distributions of Vtserver and diverse versions of
'restor'. In the case of the 2.9BSD this don't happen but the utility
can't
understand what is the 'vt' device.
Someone has encountered and solved this problem ?
Regards
Sergio
26 Jun
26 Jun
3:49 a.m.
Quoting SPC, who wrote on Thu, Jun 25, 2009 at 08:57:47PM +0200 ..
Well, the matter is simple: I'm trying to install
2.11 BSD in one PDP-11/23
PLUS with 4MB of ram, and the 'restor' and 'icheck' utilities
don't load in
he PDP, returning this message:
"Can't load split I&D files"
I tried with the diverse distributions of Vtserver and diverse versions of
'restor'. In the case of the 2.9BSD this don't happen but the utility
can't
understand what is the 'vt' device.
Someone has encountered and solved this problem ?
I could be wrong, but I think the 11/23 is not a split ID CPU?
Wilko
4:12 a.m.
On Thursday 25 June 2009, Wilko Bulte wrote:
Quoting SPC, who wrote on Thu, Jun 25, 2009 at
08:57:47PM +0200 ..
That's correct. The 11/23 supported 256K memory and separate Kernel and User but not
separate
I&D.
An 11/73 does support separate I&D...
Regards,
Lyle
Well, the matter is simple: I'm trying to
install 2.11 BSD in one PDP-11/23
PLUS with 4MB of ram, and the 'restor' and 'icheck' utilities
don't load in
he PDP, returning this message:
"Can't load split I&D files"
I tried with the diverse distributions of Vtserver and diverse versions of
'restor'. In the case of the 2.9BSD this don't happen but the utility
can't
understand what is the 'vt' device.
Someone has encountered and solved this problem ?
I could be wrong, but I think the 11/23 is not a split ID CPU?
Wilko
_______________________________________________
TUHS mailing list
TUHS(a)minnie.tuhs.org
https://minnie.tuhs.org/mailman/listinfo/tuhs
--
Lyle Bickley
Bickley Consulting West Inc.
http://bickleywest.com
"Black holes are where God is dividing by zero"
4:19 a.m.
On Thu, Jun 25, 2009 at 4:49 PM, Wilko Bulte<wb(a)freebie.xs4all.nl> wrote:
Quoting SPC, who wrote on Thu, Jun 25, 2009 at
08:57:47PM +0200 ..
IIRC -- Split I&D 11/45,11/50/11/55,11/70,11/44 and the 11/73 J11 and
11/83, 11/84, 11/94.
I think the 11/40 and the 11/34 didn't have it. I don't think the
11/60 did either.
The 11/03, 11/23 and 11/23 plus and 11/24 didn't.
Bill
--
d|i|g|i|t|a|l had it THEN. Don't you wish you could still buy it now!
pechter-at-gmail.com
Well, the matter is simple: I'm trying to
install 2.11 BSD in one PDP-11/23
PLUS with 4MB of ram, and the 'restor' and 'icheck' utilities
don't load in
he PDP, returning this message:
"Can't load split I&D files"
I tried with the diverse distributions of Vtserver and diverse versions of
'restor'. In the case of the 2.9BSD this don't happen but the utility
can't
understand what is the 'vt' device.
Someone has encountered and solved this problem ?
I could be wrong, but I think the 11/23 is not a split ID CPU?
Wilko
_______________________________________________
TUHS mailing list
TUHS(a)minnie.tuhs.org
https://minnie.tuhs.org/mailman/listinfo/tuhs
4:31 a.m.
Quoting Bill Pechter, who wrote on Thu, Jun 25, 2009 at 05:19:47PM -0400 ..
On Thu, Jun 25, 2009 at 4:49 PM, Wilko
Bulte<wb(a)freebie.xs4all.nl> wrote:
I am sure the 11/34 did not, I used an 11/34 once with UNIX.
Quoting SPC, who wrote on Thu, Jun 25, 2009 at
08:57:47PM +0200 ..
IIRC -- Split I&D 11/45,11/50/11/55,11/70,11/44 and the 11/73 J11 and
11/83, 11/84, 11/94.
I think the 11/40 and the 11/34 didn't have it. I don't think the Well, the matter is simple: I'm trying to
install 2.11 BSD in one PDP-11/23
PLUS with 4MB of ram, and the 'restor' and 'icheck' utilities
don't load in
he PDP, returning this message:
"Can't load split I&D files"
I tried with the diverse distributions of Vtserver and diverse versions of
'restor'. In the case of the 2.9BSD this don't happen but the utility
can't
understand what is the 'vt' device.
Someone has encountered and solved this problem ?
I could be wrong, but I think the 11/23 is not a split ID CPU?
Wilko
_______________________________________________
TUHS mailing list
TUHS(a)minnie.tuhs.org
https://minnie.tuhs.org/mailman/listinfo/tuhs
11/60 did either.
The 11/03, 11/23 and 11/23 plus and 11/24 didn't.
Bill
--
d|i|g|i|t|a|l had it THEN. Don't you wish you could still buy it now!
pechter-at-gmail.com
--- End of quoted text ---
4:26 a.m.
On 25/06/2009 21:49, Wilko Bulte wrote:
Quoting SPC, who wrote on Thu, Jun 25, 2009 at
08:57:47PM +0200 ..
Correct, it isn't. You cannot run 2.11BSD in a PDP-11/23 or similar
machine because a lot of things in 2.11BSD require split I&D. It's
declared on the first page of the setup instructions:
"This distribution can be booted on a PDP-11 with 1Mb of memory or
more, separate I&D, and with any of the following disks:"
You need an 11/73 or better to have split I&D. For those who might not
know what that means, it refers to the processor's ability to keep
I(nstructions) and D(ata) in separate spaces, so in effect virtually
doubling the amount of memory that can be used. That is, you can have
(almost) 64K of instructions *and* (almost) 64K of data at the same
time. Without split I&D, you have 64K in total for both.
--
Pete Peter Turnbull
Network Manager
University of York
Well, the matter is simple: I'm trying to
install 2.11 BSD in one PDP-11/23
PLUS with 4MB of ram, and the 'restor' and 'icheck' utilities
don't load in
he PDP, returning this message:
"Can't load split I&D files"
I tried with the diverse distributions of Vtserver and diverse versions of
'restor'. In the case of the 2.9BSD this don't happen but the utility
can't
understand what is the 'vt' device.
Someone has encountered and solved this problem ?
I could be wrong, but I think the 11/23 is not a split ID CPU?
5:17 a.m.
On Thursday 25 June 2009, Pete Turnbull wrote:
On 25/06/2009 21:49, Wilko Bulte wrote:
As Pete says, you can't run 2.11 on an 11/23.
However, I do run 2.9 BSD on my 11/34 as it does NOT require seperate I&D
as does 2.11 BSD.
Might want to try using 2.9 on your 11/23. Here's the CPUs supported by
2.9 BSD:
11/23, 11/24, 11/34, 11/34A, 11/34C, 11/40, 11/44, 11/45, 11/55, 11/70
Min. required memory is 192K
Regards,
Lyle
--
Lyle Bickley
Bickley Consulting West Inc.
http://bickleywest.com
"Black holes are where God is dividing by zero"
Quoting SPC, who wrote on Thu, Jun 25, 2009 at
08:57:47PM +0200 ..
Correct, it isn't. You cannot run 2.11BSD in a PDP-11/23 or similar
machine because a lot of things in 2.11BSD require split I&D. It's
declared on the first page of the setup instructions:
"This distribution can be booted on a PDP-11 with 1Mb of memory or
more, separate I&D, and with any of the following disks:"
You need an 11/73 or better to have split I&D. For those who might not
know what that means, it refers to the processor's ability to keep
I(nstructions) and D(ata) in separate spaces, so in effect virtually
doubling the amount of memory that can be used. That is, you can have
(almost) 64K of instructions *and* (almost) 64K of data at the same
time. Without split I&D, you have 64K in total for both. Well, the matter is simple: I'm trying to
install 2.11 BSD in one PDP-11/23
PLUS with 4MB of ram, and the 'restor' and 'icheck' utilities
don't load in
he PDP, returning this message:
"Can't load split I&D files"
I tried with the diverse distributions of Vtserver and diverse versions of
'restor'. In the case of the 2.9BSD this don't happen but the utility
can't
understand what is the 'vt' device.
Someone has encountered and solved this problem ?
I could be wrong, but I think the 11/23 is not a split ID CPU?
5440
days inactive
5440
days old
6 comments
5 participants
participants (5)
-
Bill Pechter -
Lyle Bickley -
Pete Turnbull -
SPC -
Wilko Bulte