25 Apr
2006
25 Apr
'06
12:53 p.m.
If this helps at all, I've been working (very, very slowly) on a port of
v32 to Intel platforms. At first I used gcc for some kernel work, but
quickly realized that it would be overwhelming to the final v7 system.
Since I don't want to do the work twice, I looked for a different compiler
suite. I switched to the ACK compiler suite and just finished the WinXP
cross compiler work. It has a pdp11 back end, which I have yet to try,
that may be useful.
It isn't gcc, but ir does do ANSI C and the i386 assembler seems to be
pretty complete. Let me know if there's any interest and I'll put it up
on my site for download.
Pat
Toby Thain napisał(a):
---------------------------------------------
This message was sent using Monmouth Internet MI-Webmail.
http://www.monmouth.com/
On 24-Apr-06, at 9:05 AM, Wesley Parish wrote:
Yes, even running vi or csh in Ultrix (in simh pdp11) produced message :
too big. After setting cpu to 3072K it worked(setting to 4096 K hanged
the system BTW).
Cross compilation has also this advantage , that You have better editors
to Your disposal and You can work faster.
Well native cc seems to be good enough, using pdp11 in emulator we have
anyway only hobbyst license .
Andrzej
_______________________________________________
TUHS mailing list
TUHS(a)minnie.tuhs.org
https://minnie.tuhs.org/mailman/listinfo/tuhs
Quoting Andrzej Popielewicz
<vasco(a)icpnet.pl>pl>:
>Wesley Parish napisał(a):
>
>
>
It can't be done.
As others point out, the program is many times (100x or more?) too
big -- likely even gcc 1.x is far too big, but gcc {2,3,4}.x are all
meant for large 32-bit systems.
However, cross-compilation can certainly be easily done. I have made
a PDP-11 back-end for lcc[1] (not quite complete but shows that it
can be done), which is an ANSI (c89) compiler[2]. lcc is a much
smaller and simpler compiler than gcc, but its executables are still
massively outsize for PDP-11 systems.
2 May
2 May
4:52 p.m.
New subject: [pups] gcc-3.4.6 and old unix
On Tue, 25 Apr 2006 patv(a)monmouth.com wrote:
If this helps at all, I've been working (very,
very slowly) on a port of
v32 to Intel platforms. At first I used gcc for some kernel work, but
quickly realized that it would be overwhelming to the final v7 system.
If you're interested in running V7 on x86, you should check out
the 286-port on the TUHS FTP site, as it was fully operational
until the author, according to his report, messed up the file
system code.
For a 32-bit Unix, the Quasijarus project would be better
starting point, as it is more seasoned as a 32-bit operating
system. The project project was started by Michael Sokolov, with
the primary goal of extending 4.3BSD-Tahoe to run on newer VAX
hardware. You can find the source, as well as the mailing list,
from the web page at: http://ifctfvax.harhan.org/Quasijarus/
Because NetBSD and especially GCC have long since outgrown all
but the most powerful VAX hardware, including my VAXstation
4000-60, I've been looking into the possibility of getting
Quasijarus to run on the machine - very slowly, of course.
I've only managed to hack the NetBSD kernel into running the
binaries properly - it should support 32V-ones as well, for
that matter.
I'm also interested in 386-ports of the classical Unix utilities,
but my kernel-side focus is on a brand new, non-portable kernel
written in assembly language for compactness and flexibility of
running, examining and debugging code that excessively picky
operating systems choke at - e.g. real- and kernel-mode code.
Since I don't want to do the work twice, I looked
for a different compiler
suite. I switched to the ACK compiler suite and just finished the WinXP
cross compiler work. It has a pdp11 back end, which I have yet to try,
that may be useful.
It isn't gcc, but ir does do ANSI C and the i386 assembler seems to be
pretty complete. Let me know if there's any interest and I'll put it up
on my site for download.
Did you make other improvements than XP cross-compilation?
-aw
3 May
3 May
1:17 a.m.
New subject: [pups] gcc-3.4.6 and old unix
It's actually a GNU port, with small changes to the actual sources.
Mainly configure and make file changes so that it properly builds on
cygwin and linux. Creates minix binaries.
Pat
Charlie ROOT wrote:
Did you make other improvements than XP cross-compilation?
-aw
6577
days inactive
6585
days old
2 comments
3 participants
participants (3)
-
Charlie ROOT -
Pat Villani -
patv＠monmouth.com