11 Mar
2024
11 Mar
'24
5:12 p.m.
On Thu, Mar 7, 2024, 4:14 PM Tom Lyon <pugs78 at gmail.com> wrote:
For no good reason, I've been wondering about the
early history of C
compilers that were not derived from Ritchie, Johnson, and Snyder at Bell.
Especially for x86. Anyone have tales?
Were any of those compilers ever used to port UNIX?
An unusual one would be the “revenue bomb” compiler that Charles Simonyi and Richard
Brodie did at Microsoft in 1981.
This compiler was intended to provided a uniform environment for the menagerie of 8 and
16-bit computers of the era. It compiled to a byte code which executed through a small
interpreter. This by itself was hardly new of course, but it had some unique features. It
generated code in overlays, so that it could run a code base larger than 64KB (but it
defined only one data segment). It also defined a small set of “system” commands, that
allowed for uniform I/O. I still have the implementation spec for that interpreter
somewhere.
This compiler was used for the first versions of Multiplan and Word, and my understanding
is that the byte code engine was later re-used in Visual Basic. I think the compiler also
had a Xenix port, maybe it even was Xenix native (and at this time, Xenix would still
essentially have been V7).
I am not sure to what extent this compiler was independent of the Bell compilers. It could
well be that it was based on PCC, Microsoft was a Unix licensee after all and at the time
busy doing ports. On the other hand, Charles Simonyi would certainly have been capable of
creating his own from scratch. I do know that this compiler preceded Lattice C, the latter
of which was distributed by Microsoft as Microsoft C 1.0.
Maybe others know more about this Simonyi/Brodie compiler?
Paul
Notes:
http://www.memecentral.com/mylife.htm
https://web.archive.org/web/20080905231519/http://www.computerworld.com/sof…
http://seefigure1.com/images/xenix/xenix-timeline.jpg
11 Mar
11 Mar
8:44 p.m.
New subject: History of non-Bell C compilers?
Since it came up in this thread, here's my review of Coherent in BYTE
Magazine (1985):
https://www.mrochkind.com/mrochkind/docs/Byte-Pick-Coherent-Theos.pdf
Marc
On Mon, Mar 11, 2024 at 11:13 AM Paul Ruizendaal <pnr(a)planet.nl> wrote:
On Thu, Mar 7, 2024, 4:14 PM Tom Lyon <pugs78 at
gmail.com> wrote:
--
*My new email address is mrochkind(a)gmail.com <mrochkind(a)gmail.com>*
For no good reason, I've been wondering
about the early history of C
compilers that were not derived from Ritchie, Johnson, and Snyder at
Bell.
Especially for x86. Anyone have tales?
Were any of those compilers ever used to port UNIX?
An unusual one would be the “revenue bomb” compiler that Charles Simonyi
and Richard Brodie did at Microsoft in 1981.
This compiler was intended to provided a uniform environment for the
menagerie of 8 and 16-bit computers of the era. It compiled to a byte code
which executed through a small interpreter. This by itself was hardly new
of course, but it had some unique features. It generated code in overlays,
so that it could run a code base larger than 64KB (but it defined only one
data segment). It also defined a small set of “system” commands, that
allowed for uniform I/O. I still have the implementation spec for that
interpreter somewhere.
This compiler was used for the first versions of Multiplan and Word, and
my understanding is that the byte code engine was later re-used in Visual
Basic. I think the compiler also had a Xenix port, maybe it even was Xenix
native (and at this time, Xenix would still essentially have been V7).
I am not sure to what extent this compiler was independent of the Bell
compilers. It could well be that it was based on PCC, Microsoft was a Unix
licensee after all and at the time busy doing ports. On the other hand,
Charles Simonyi would certainly have been capable of creating his own from
scratch. I do know that this compiler preceded Lattice C, the latter of
which was distributed by Microsoft as Microsoft C 1.0.
Maybe others know more about this Simonyi/Brodie compiler?
Paul
Notes:
http://www.memecentral.com/mylife.htm
https://web.archive.org/web/20080905231519/http://www.computerworld.com/sof…
http://seefigure1.com/images/xenix/xenix-timeline.jpg 
10:28 p.m.
New subject: History of non-Bell C compilers?
I used the DEC VMS C compiler extensively while I was at NSWIT. I ported a lot of Berkley
(I think) C code to VMS. Some of their VLSI design suite, KIC etc. There weren’t a lot of
changes to make, the compiler and library was pretty K&R from what I remember. The
usual small header issues applied. VMS IO is a bit different from UNIX IO but they had a
mode (stream I think) that meant minimal changes to UNIX code.
http://bitsavers.informatik.uni-stuttgart.de/pdf/dec/vax/lang/c/AI-L370C-TE…
It did help that the code I was working with was pretty damn good. I learn C porting KIC
to VMS.
On 12 Mar 2024, at 7:44 AM, Marc Rochkind
<mrochkind(a)gmail.com> wrote:
Since it came up in this thread, here's my review of Coherent in BYTE Magazine
(1985):
https://www.mrochkind.com/mrochkind/docs/Byte-Pick-Coherent-Theos.pdf
Marc
On Mon, Mar 11, 2024 at 11:13 AM Paul Ruizendaal <pnr(a)planet.nl> wrote:
On Thu, Mar 7, 2024, 4:14 PM Tom Lyon <pugs78 at gmail.com> wrote:
Peter Yardley
peter.martin.yardley(a)gmail.com
For no good reason, I've been wondering
about the early history of C
compilers that were not derived from Ritchie, Johnson, and Snyder at Bell.
Especially for x86. Anyone have tales?
Were any of those compilers ever used to port UNIX?
An unusual one would be the “revenue bomb” compiler that Charles Simonyi and Richard
Brodie did at Microsoft in 1981.
This compiler was intended to provided a uniform environment for the menagerie of 8 and
16-bit computers of the era. It compiled to a byte code which executed through a small
interpreter. This by itself was hardly new of course, but it had some unique features. It
generated code in overlays, so that it could run a code base larger than 64KB (but it
defined only one data segment). It also defined a small set of “system” commands, that
allowed for uniform I/O. I still have the implementation spec for that interpreter
somewhere.
This compiler was used for the first versions of Multiplan and Word, and my understanding
is that the byte code engine was later re-used in Visual Basic. I think the compiler also
had a Xenix port, maybe it even was Xenix native (and at this time, Xenix would still
essentially have been V7).
I am not sure to what extent this compiler was independent of the Bell compilers. It
could well be that it was based on PCC, Microsoft was a Unix licensee after all and at the
time busy doing ports. On the other hand, Charles Simonyi would certainly have been
capable of creating his own from scratch. I do know that this compiler preceded Lattice C,
the latter of which was distributed by Microsoft as Microsoft C 1.0.
Maybe others know more about this Simonyi/Brodie compiler?
Paul
Notes:
http://www.memecentral.com/mylife.htm
https://web.archive.org/web/20080905231519/http://www.computerworld.com/sof…
http://seefigure1.com/images/xenix/xenix-timeline.jpg
--
My new email address is mrochkind(a)gmail.com 
12 Mar
12 Mar
12:30 a.m.
New subject: History of non-Bell C compilers?
One of the neatest compilers I worked with was Eric Biederman's romcc.
"romcc is a C compiler which produces binaries which do not rely on RAM, but
instead only use CPU registers."
We used romcc for 15 years or so. It was critical to getting DRAM and
Hypertransport topology working on the Opteron. Remember: at
power-on/reset, RAM is dead, dead, dead, and getting it going on newer
systems is (literally) billions of instructions. So, no ram. The only "ram"
romcc had were the general purpose registers. Later, eric added support for
the SIMD registers, and "memory" grew a few hundred bytes. No memory, no
stack: 100% inlining. romcc knew how to use puddle arithmetic and all the
other tricks. It was amazing.
It is a full ANSI C compiler (as of 2006 ANSI C) in 25KLOC code, in one
file: https://github.com/wt/coreboot/blob/master/util/romcc/romcc.c
The story of its creation, as told to me by the Linux NetworX CTO ca 2004:
Eric worked at Linux NetworX at the time, and they were shipping
LinuxBIOS-based systems. Everyone working with Opteron was suffering with
assembly. Eric vanished for 30 days, and on the 31st day returned from the
mountain (or his apartment I guess) with romcc, and It Was Good. Really
good. The code we wrote for Opteron Hypertransport was far better than
AMDs; they even admitted it to us later. We could even run with empty
Socket 0; they could not.
Last I checked, it still builds and 100 or so regression tests work just
fine.
On Mon, Mar 11, 2024 at 3:28 PM Peter Yardley <
peter.martin.yardley(a)gmail.com> wrote:
I used the DEC VMS C compiler extensively while I was
at NSWIT. I ported a
lot of Berkley (I think) C code to VMS. Some of their VLSI design suite,
KIC etc. There weren’t a lot of changes to make, the compiler and library
was pretty K&R from what I remember. The usual small header issues applied.
VMS IO is a bit different from UNIX IO but they had a mode (stream I
think) that meant minimal changes to UNIX code.
http://bitsavers.informatik.uni-stuttgart.de/pdf/dec/vax/lang/c/AI-L370C-TE…
It did help that the code I was working with was pretty damn good. I learn
C porting KIC to VMS.
and
Richard Brodie did at Microsoft in 1981.
On 12 Mar 2024, at 7:44 AM, Marc Rochkind
<mrochkind(a)gmail.com> wrote:
Since it came up in this thread, here's my review of Coherent in BYTE
Magazine (1985):
https://www.mrochkind.com/mrochkind/docs/Byte-Pick-Coherent-Theos.pdf
Marc
On Mon, Mar 11, 2024 at 11:13 AM Paul Ruizendaal <pnr(a)planet.nl> wrote:
On Thu, Mar 7, 2024, 4:14 PM Tom Lyon <pugs78 at gmail.com> wrote:
> For no good reason, I've been wondering about the early history of C
> compilers that were not derived from Ritchie, Johnson, and Snyder at
Bell.
Especially for x86. Anyone have tales?
Were any of those compilers ever used to port UNIX?
An unusual one would be the “revenue bomb” compiler that Charles Simonyi
This compiler was intended to provided a uniform environment for the
menagerie of
8 and 16-bit computers of the era. It compiled to a byte code
which executed through a small interpreter. This by itself was hardly new
of course, but it had some unique features. It generated code in overlays,
so that it could run a code base larger than 64KB (but it defined only one
data segment). It also defined a small set of “system” commands, that
allowed for uniform I/O. I still have the implementation spec for that
interpreter somewhere.
This compiler was used for the first versions of Multiplan and Word, and
my
understanding is that the byte code engine was later re-used in Visual
Basic. I think the compiler also had a Xenix port, maybe it even was Xenix
native (and at this time, Xenix would still essentially have been V7).
I am not sure to what extent this compiler was independent of the Bell
compilers.
It could well be that it was based on PCC, Microsoft was a Unix
licensee after all and at the time busy doing ports. On the other hand,
Charles Simonyi would certainly have been capable of creating his own from
scratch. I do know that this compiler preceded Lattice C, the latter of
which was distributed by Microsoft as Microsoft C 1.0.
Maybe others know more about this Simonyi/Brodie compiler?
Paul
Notes:
http://www.memecentral.com/mylife.htm
https://web.archive.org/web/20080905231519/http://www.computerworld.com/sof…
http://seefigure1.com/images/xenix/xenix-timeline.jpg
--
My new email address is mrochkind(a)gmail.com
Peter Yardley
peter.martin.yardley(a)gmail.com
4:41 p.m.
New subject: History of non-Bell C compilers?
On 3/11/24, Peter Yardley <peter.martin.yardley(a)gmail.com> wrote:
I used the DEC VMS C compiler extensively while I was
at NSWIT. I ported a
lot of Berkley (I think) C code to VMS. Some of their VLSI design suite, KIC
etc. There weren’t a lot of changes to make, the compiler and library was
pretty K&R from what I remember. The usual small header issues applied
The developers of the original DEC VMS C compiler took great pains to
be K&R-friendly by default. There was a strict ANSI C option
available.
There later was a later, C89 compiler produced by Dave Cutler's
DECwest engineering team in Seattle. I think it ran on Unix as well
as VMS. It enforced the C89 standard very strictly--no option for
relaxations or extensions and no K&R compatibility. One customer
described it as the Rush Limbaugh of C compilers--extremely
conservative and you can't argue with it.
VMS IO is a bit different from UNIX IO
Understatement of the century. :-)
but they had a mode (stream I think)
that meant minimal changes to UNIX code.
VMS's device-independent I/O layer is called Record Management
Services (RMS) and as its name implies it is record-oriented. They
did eventually add a stream mode to RMS, but that didn't happen until
well into the 1990s. When DEC C for VMS first came out (ca. 1980)
there was no stream mode in RMS. The C RTL had to implement stream
I/O as a layer on top of RMS. It's fairly easy to build
record-oriented I/O on top of stream I/O but it's very difficult to do
it the other way around. At first release the VMS C RTL's I/O had a
lot of buggy edge conditions. It took them several releases to get
the I/O working properly.
Circa 1985 there was a port of the Bourne shell to VAX/VMS. It of
course needed pipes, and I wrote a pipe pseudo-device driver for VMS.
It supported both stream and record read and write operations.
-Paul W.
2:55 p.m.
New subject: History of non-Bell C compilers?
On Tue, 12 Mar 2024 at 08:02, Marc Rochkind <mrochkind(a)gmail.com> wrote:
Since it came up in this thread, here's my review
of Coherent in BYTE
Magazine (1985):
https://www.mrochkind.com/mrochkind/docs/Byte-Pick-Coherent-Theos.pdf
This is an impressively thorough review from an end-user perspective, and I
am sorry that it was buried so far back in that issue of Byte! Though I
suppose this was from the era when Byte was jam-packed with informative
reviews. Did you continue to use Coherent, or do you have any thoughts on
the article in hindsight?
-Henry
5:17 p.m.
New subject: History of non-Bell C compilers?
On Tue, Mar 12, 2024 at 8:55 AM Henry Bent <henry.r.bent(a)gmail.com> wrote:
...Did you continue to use Coherent, or do you have
any thoughts on the
article in hindsight?
-Henry
I definitely didn't continue to use Coherent. As I recall, I installed each
of the 3 systems successively on my XT (Pick, Coherent, and THEOS). That
was about the time I got PC/IX from Interactive Systems (true System III),
and that's what I went with.
At a trade show, I bought a utility that allowed me to run PC-DOS under
PC/IX. I'm sure it wasn't a virtual machine. Rather, it just swapped back
and forth. (Guessing a bit there.)
What Coherent and some other very early UNIX clones missed was the idea of
open source, which came along later. This is what allowed Linux to thrive
when others went by the wayside. But, nobody knew how to make any money
from open source (and maybe still don't), so that would have been a problem
back then.
As for my thoughts on the article: Reading it recently, it seems OK. I have
no idea how one ought to go about reviewing an operating system. Certainly
loading one up and playing with it for a couple of hours doesn't tell much.
Using one exclusively for a long time doesn't tell one anything, either. I
think reviews work better for movies, books, hotels, cameras, and things
like that.
Marc
13 Mar
13 Mar
2:37 p.m.
New subject: History of non-Bell C compilers?
@Marc
On Tue, Mar 12, 2024 at 1:18 PM Marc Rochkind <mrochkind(a)gmail.com> wrote:
At a trade show, I bought a utility that allowed me to
run PC-DOS under
PC/IX. I'm sure it wasn't a virtual machine. Rather, it just swapped back
and forth. (Guessing a bit there.)
Hmm ... you sure it was not either VPIX or DOS/Merge -- ISC built VPIX in
cooperation with the Phoenix Tech folks for PC/IX. I always bought a copy
with it, but it may have been an option. LCC did DOS/Merge originally as
part of the AIX work for IBM and would become a core part of OS/2 Warp
IIRC. Both Merge and VPIX had some rough edges but certainly worked fine
for DOS 3.3 programs. The issue tended to be Win and DOS graphics-based
programs/games that played fast and loose, bypassing the DOS OS interface
and accessing the HW directly. For instance, I never got the flight
simulator (Air War over Germany) for Dad's WWII plane (P-47 Thunderbolt) to
run under either (i.e., only under DOS directly on the HW. FWIW: In that
mode, Dad said the simulator flew a lot like how he remembered it).
Both Merge and VPIX used the 386 VM support and a bunch of work in the core
OS. Heinz would have to fill us in here. The version of the 386 port ISC
delivered to AT&T and Intel only had the kernel changes to allow the VM
support for VPIX to be linked in, but it was not there. IICR (and I'm not
sure I am) is that Merge could run on PC/IX also, but you had to replace a
couple of kernel modules. It certainly would work on the AT&T and Intel
versions.
ᐧ
3:28 p.m.
New subject: History of non-Bell C compilers?
@Clem Cole <clemc(a)ccc.com>,
I don't remember what it was. But, the XT had an 8088, so certainly no 386
technology was involved.
Marc
On Wed, Mar 13, 2024 at 8:38 AM Clem Cole <clemc(a)ccc.com> wrote:
@Marc
On Tue, Mar 12, 2024 at 1:18 PM Marc Rochkind <mrochkind(a)gmail.com> wrote:
--
*My new email address is mrochkind(a)gmail.com <mrochkind(a)gmail.com>*
At a trade show, I bought a utility that allowed
me to run PC-DOS under
PC/IX. I'm sure it wasn't a virtual machine. Rather, it just swapped back
and forth. (Guessing a bit there.)
Hmm ... you sure it was not either VPIX or DOS/Merge -- ISC built VPIX in
cooperation with the Phoenix Tech folks for PC/IX. I always bought a copy
with it, but it may have been an option. LCC did DOS/Merge originally as
part of the AIX work for IBM and would become a core part of OS/2 Warp
IIRC. Both Merge and VPIX had some rough edges but certainly worked fine
for DOS 3.3 programs. The issue tended to be Win and DOS graphics-based
programs/games that played fast and loose, bypassing the DOS OS interface
and accessing the HW directly. For instance, I never got the flight
simulator (Air War over Germany) for Dad's WWII plane (P-47 Thunderbolt) to
run under either (i.e., only under DOS directly on the HW. FWIW: In that
mode, Dad said the simulator flew a lot like how he remembered it).
Both Merge and VPIX used the 386 VM support and a bunch of work in the
core OS. Heinz would have to fill us in here. The version of the 386
port ISC delivered to AT&T and Intel only had the kernel changes to allow
the VM support for VPIX to be linked in, but it was not there. IICR (and
I'm not sure I am) is that Merge could run on PC/IX also, but you had to
replace a couple of kernel modules. It certainly would work on the AT&T
and Intel versions.
ᐧ
3:33 p.m.
New subject: History of non-Bell C compilers?
On Wed, Mar 13, 2024, 9:28 AM Marc Rochkind <mrochkind(a)gmail.com> wrote:
Venix could also run DOS. There is a kernel module (well .o) that handles
it...
Warner
Marc
> On Wed, Mar 13, 2024 at 8:38 AM Clem Cole
<clemc(a)ccc.com> wrote:
>> @Marc
> >> On Tue, Mar 12, 2024 at 1:18 PM Marc
Rochkind <mrochkind(a)gmail.com >> wrote:
> >>> At a trade show, I bought a utility
that allowed me to run PC-DOS under
>>> PC/IX. I'm sure it wasn't a virtual machine. Rather, it just
swapped back
>>> and forth. (Guessing a bit there.)
>> >> Hmm ... you
sure it was not either VPIX or DOS/Merge -- ISC built VPIX in
>> cooperation with the Phoenix Tech folks for PC/IX. I always bought a copy
>> with it, but it may have been an option. LCC did DOS/Merge originally as
>> part of the AIX work for IBM and would become a core part of OS/2 Warp
>> IIRC. Both Merge and VPIX had some rough edges but certainly worked fine
>> for DOS 3.3 programs. The issue tended to be Win and DOS graphics-based
>> programs/games that played fast and loose, bypassing the DOS OS interface
>> and accessing the HW directly. For instance, I never got the flight
>> simulator (Air War over Germany) for Dad's WWII plane (P-47 Thunderbolt) to
>> run under either (i.e., only under DOS directly on the HW. FWIW: In that
>> mode, Dad said the simulator flew a lot like how he remembered it).
> >> Both Merge and VPIX used the 386 VM
support and a bunch of work in the
>> core OS. Heinz would have to fill us in here. The version of the 386
>> port ISC delivered to AT&T and Intel only had the kernel changes to allow
>> the VM support for VPIX to be linked in, but it was not there. IICR (and
>> I'm not sure I am) is that Merge could run on PC/IX also, but you had to
>> replace a couple of kernel modules. It certainly would work on the AT&T
>> and Intel versions.
>> ᐧ
>
> --
> *My new email address is mrochkind(a)gmail.com <mrochkind(a)gmail.com>*
@Clem Cole <clemc(a)ccc.com>,
I don't remember what it was. But, the XT had an 8088, so certainly n
o 386 technology was involved.
3:50 p.m.
New subject: PC/IX, VPIX, DOS/merge, etc. [was Re: History of non-Bell C compilers?
Heinz would certainly be more definitive than me regarding the ISC
products, but ...
o IIRC, the name "PC/IX" was only used for the PC/XT release
- PC/IX was my first hands on access to Unix
- VPIX was bundled with PC/IX version
- I used VPIX minimally, don't remember much about it
- when I got a PC/AT for my office, I switched to Xenix because it took
advantage of the 286
- there are various copies of PC/IX available, e.g.,
https://winworldpc.com/product/pc-ix/10, also subsequent ISC 386
products there, pursuing is buried deep on my todo list
o Dell SVR3 was based on Interactive UNIX for 386, but eschewed VPIX in
favor of DOS/Merge from LCC
(https://notes.technologists.com/notes/2008/01/10/a-brief-history-of-dell-un…)
o Dell SVR4 was independent of both ISC & LCC except that it included
DOS/merge
- the Dell SVR4 that I've made available for ancient hardware, 86Box and
VirtualBox runs DOS/merge acceptably in my minimal testing
Charlie
On 3/13/2024 10:33 AM, Warner Losh wrote:
On Wed, Mar 13, 2024, 9:28 AM Marc Rochkind <mrochkind(a)gmail.com
<mailto:mrochkind@gmail.com>> wrote:
@Clem Cole <mailto:clemc@ccc.com>,
I don't remember what it was. But, the XT had an 8088, so certainly n
o 386 technology was involved.
Venix could also run DOS. There is a kernel module (well .o) that
handles it...
Warner
Marc
On Wed, Mar 13, 2024 at 8:38 AM Clem Cole <clemc(a)ccc.com
<mailto:clemc@ccc.com>> wrote:
@Marc
On Tue, Mar 12, 2024 at 1:18 PM Marc Rochkind
<mrochkind(a)gmail.com <mailto:mrochkind@gmail.com>> wrote:
At a trade show, I bought a utility that allowed me to run
PC-DOS under PC/IX. I'm sure it wasn't a virtual machine.
Rather, it just swapped back and forth. (Guessing a bit there.)
Hmm ... you sure it was not either VPIX or DOS/Merge -- ISC
built VPIX in cooperation with the Phoenix Tech folks for PC/IX.
I always bought a copy with it, but it may have been an option.
LCC did DOS/Merge originally as part of the AIX work for IBM
and would become a core part of OS/2 Warp IIRC. Both Merge and
VPIX had some rough edges but certainly worked fine for DOS 3.3
programs. The issue tended to be Win and DOS graphics-based
programs/games that played fast and loose, bypassing the DOS OS
interface and accessing the HW directly. For instance, I never
got the flight simulator (Air War over Germany) for Dad's WWII
plane (P-47 Thunderbolt) to run under either (i.e., only under
DOS directly on the HW. FWIW: In that mode, Dad said the
simulator flew a lot like how he remembered it).
Both Merge and VPIX used the 386 VM support and a bunch of work
in the core OS. Heinz would have to fill us in here. The
version of the 386 port ISC delivered to AT&T and Intel only had
the kernel changes to allow the VM support for VPIX to be linked
in, but it was not there. IICR (and I'm not sure I am) is that
Merge could run on PC/IX also, but you had to replace a couple
of kernel modules. It certainly would work on the AT&T and
Intel versions.
ᐧ
--
/My new email address is mrochkind(a)gmail.com
<mailto:mrochkind@gmail.com>/
--
voice: +1.512.784.7526 e-mail: sauer(a)technologists.com
fax: +1.512.346.5240 Web: https://technologists.com/sauer/
Facebook/Google/LinkedIn/Twitter: CharlesHSauer
3:53 p.m.
New subject: History of non-Bell C compilers?
Thanks. Fair enough. You mentioned PC/IX as *ISC's System III*
I'm not sure I ever ran ISC's System III port—only the V.3 port - which was
the basis for their ATT, Intel, and IBM work and later sold directly. I'm
fairly sure ISC also called that port PC/IX, but they might have added
something to say with 386 in the name—I've forgotten. [Heinz probably can
clarify here]. Anyway, this is likely the source of my thinking. FWIW: The
copy of PC/IX for the 386 (which I still have on a system I have not booted
in ages) definitely has VPIX.
ᐧ
On Wed, Mar 13, 2024 at 11:28 AM Marc Rochkind <mrochkind(a)gmail.com> wrote:
@Clem Cole <clemc(a)ccc.com>,
I don't remember what it was. But, the XT had an 8088, so certainly no 386
technology was involved.
Marc
On Wed, Mar 13, 2024 at 8:38 AM Clem Cole <clemc(a)ccc.com> wrote:
@Marc
On Tue, Mar 12, 2024 at 1:18 PM Marc Rochkind <mrochkind(a)gmail.com>
wrote:
--
*My new email address is mrochkind(a)gmail.com <mrochkind(a)gmail.com>*
At a trade show, I bought a utility that allowed
me to run PC-DOS under
PC/IX. I'm sure it wasn't a virtual machine. Rather, it just swapped back
and forth. (Guessing a bit there.)
Hmm ... you sure it was not either VPIX or DOS/Merge -- ISC built VPIX in
cooperation with the Phoenix Tech folks for PC/IX. I always bought a copy
with it, but it may have been an option. LCC did DOS/Merge originally as
part of the AIX work for IBM and would become a core part of OS/2 Warp
IIRC. Both Merge and VPIX had some rough edges but certainly worked fine
for DOS 3.3 programs. The issue tended to be Win and DOS graphics-based
programs/games that played fast and loose, bypassing the DOS OS interface
and accessing the HW directly. For instance, I never got the flight
simulator (Air War over Germany) for Dad's WWII plane (P-47 Thunderbolt) to
run under either (i.e., only under DOS directly on the HW. FWIW: In that
mode, Dad said the simulator flew a lot like how he remembered it).
Both Merge and VPIX used the 386 VM support and a bunch of work in the
core OS. Heinz would have to fill us in here. The version of the 386
port ISC delivered to AT&T and Intel only had the kernel changes to allow
the VM support for VPIX to be linked in, but it was not there. IICR (and
I'm not sure I am) is that Merge could run on PC/IX also, but you had to
replace a couple of kernel modules. It certainly would work on the AT&T
and Intel versions.
ᐧ
12 Mar
12 Mar
3:42 p.m.
New subject: History of non-Bell C compilers?
On 11 Mar 2024, at 18:12, Paul Ruizendaal
<pnr(a)planet.nl> wrote:
On Thu, Mar 7, 2024, 4:14 PM Tom Lyon <pugs78 at gmail.com> wrote:
I was pointed to the book “Writing Solid Code”, Microsoft Press ISBN 1-55615-551-4. In the
foreword it says:
"The system we used to develop Multiplan was pretty sophisticated for PC development
in those days. We wrote the core product in C - most programs then were written in
assembly or Pascal. We did our editing and compilation on a PDP-11 running Unix. The C
code was compiled into p-code and downloaded to the target machines. We had to build
p-code interpreters for each microprocessor in use at that time. By the end of 1983, we
had interpreters working for the 8080/Z80, the 6502, the Z8000, the 68000, the 9900, and
the 8086.”
So the Simonyi compiler was Xenix/Unix native.
The specs for its p-code interpreter can be found here:
https://forums.atariage.com/applications/core/interface/file/attachment.php…
https://forums.atariage.com/applications/core/interface/file/attachment.php…
For no good reason, I've been wondering
about the early history of C
compilers that were not derived from Ritchie, Johnson, and Snyder at Bell.
Especially for x86. Anyone have tales?
Were any of those compilers ever used to port UNIX?
An unusual one would be the “revenue bomb” compiler that Charles Simonyi and Richard
Brodie did at Microsoft in 1981.
[snip]
I think the compiler also had a Xenix port, maybe it even was Xenix native (and at this
time, Xenix would still essentially have been V7).
205
days inactive
207
days old
13 comments
10 participants
participants (10)
-
Charles H Sauer (he/him) -
Clem Cole -
Henry Bent -
Larry Stewart -
Marc Rochkind -
Paul Ruizendaal -
Paul Winalski -
Peter Yardley -
ron minnich -
Warner Losh