Setup Instructions for 2.11BSD
Matthias Bruestle
m at mbsks.franken.de
Mon Sep 15 22:14:02 AEST 1997
Mahlzeit
According to Steven Schultz:
> a BSD/OS|FreeBSD|Linux|usw box and write the images out to a 4mm
(Is usw also used in English?)
> regretted it). A used UC08 (or similar CMD product) is from
> what I have seen about $900 today. A TAPE ONLY CMD adaptor is "just"
> $300 - that's not too bad, is it? Since in many cases the systems
US$300 may be not bad, but I would rather buy a new monitor.
(A 14-year-old 14" colour monitor with "some" "small" defects or
a 14" grayscale monitor are not the best.)
I could also buy RAM for my M70: 1MB US$550. That's way to much for me.
> You don't want floppies ;) RX50 floppy media is expensive and
A bootable RT-11 floppy with kserve is fine if you have a disk image.
If I find a "DU-ready" BSD (I'm not that good in C.) I will try this
floppy solution to install it on my M70. That is also my only
possibility without spending hundreds of dollars, unless someone
writes a serial tape emulator or something like that.
Btw. my M70 has two monitors:
SBC M70-V3.0
DX DY DL DU DM DB MS MT
M70>
and
173244
@
Is the second a debugger?
Mahlzeit
endergone Zwiebeltuete
--
insanity inside
Received: (from major at localhost)
by minnie.cs.adfa.oz.au (8.8.5/8.8.5) id XAA13177
for pups-liszt; Mon, 15 Sep 1997 23:38:42 +1000 (EST)
X-Authentication-Warning: minnie.cs.adfa.oz.au: major set sender to owner-pups at minnie.cs.adfa.oz.au using -f
More information about the TUHS
mailing list