Re: [pups] Supnik Emulator on Redhat Linux

Ah, That’s a good suggestion. I’ll dig my way round the redhat config stuff and see if I can find one to switch off.

Robin From: Toby Thain [mailto:toby@smartgames.ca] Sent: 23 March 2006 06:37 To: robinb(a)ruffnready.co.uk Subject: Re: [pups] Supnik Emulator on Redhat Linux On 20-Mar-06, at 1:54 PM, Robin wrote: Hi, I have successfully got the supnik emulator up and running on redhat but have hit a problem, which is probably configuration and serves to show how little I know about more recent unices. To allow computer to emulator comms I have installed a second card and enabled it under linux. It is enabled with a different address to the first one 192.168.1.10 and 192.168.1.11. The emulator can see both of the devices and I have attached device 1 (eth1) as xq0. I run up BSD2.11 on the emulator and it attaches to the ether device at start up. I can ftp from the emulator to the host and back again if I start ftp on the emulator. I can’t telnet to the host. I can’t telnet from the host to the emulator. I can’t ftp from the host to the emulator. I also can’t telnet in from a telnet session to the listening socket set up for a DZ11 (I could before I started trying to get the networking up). Ideas anyone? Sounds like firewall to me. --Toby Robin _______________________________________________ PUPS mailing list PUPS(a)minnie.tuhs.org http://minnie.tuhs.org/mailman/listinfo/pups