20 Dec
1998
20 Dec
'98
9:08 p.m.
Hi,
I was given a couple of QBus PDP11 on which I'm going to run 2.11BSD or
some other version of UNIX. One /73 and one /83. Both had RL02 drives, a
couple of RD53's and loads of serial boards and an extra expansion box
each. Now there's that little question of lugging them back to my
apartment. So, is there any particular precaution I should take when it
comes to the RL02's? Are they sensitive to vibrations or something? Do
they have to be in some sort of transport mode?
Is there some information available online which explains how to operate
the RL02? Like how to open the drive, for starters... :) Or how the RL02
controller should be jumpered. (I guess that depends on what else is
present on the QBus though...)
Is there some other UNIX version that I can run on any of these machines?
I already have one PDP11/83 which happily runs 2.11BSD so it would be nice
to run older UNIX versions as well.
Thanks!
--
Jorgen Pehrson HP 9000/380 (NetBSD/hp300 1.3)
jp(a)spektr.ludvika.se DECstation 5000/200 (NetBSD/pmax 1.3)
http://spektr.ludvika.se/museum PDP11/83 (2.11BSD) VAX2000 (NetBSD/vax)
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id KAA12528
for pups-liszt; Mon, 21 Dec 1998 10:18:04 +1100 (EST)
I could donate SunOS 3.2, SunOS 4.0 (MC68010), and the 4.0.3 upgrade to the
archive, assuming they want Sun2 material. I also have the SunOS 4.0.3
_upgrade_ for the 68020. All the tape files are tarred and gziped on a CDROM
I burned not too long ago.
From "James E. Carpenter"
<jimc(a)zach1.tiac.net> Mon Dec 21 09:17:43 1998
Received: from
mail-out-0.tiac.net (mail-out-0.tiac.net [199.0.65.247])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id KAA12523
for <pups(a)minnie.cs.adfa.oz.au>au>; Mon, 21 Dec 1998 10:17:54 +1100 (EST)
Received: from mail-out-1.tiac.net (mail-out-1.tiac.net [199.0.65.12])
by mail-out-0.tiac.net (8.8.8/8.8.8) with ESMTP id SAA28527;
Sun, 20 Dec 1998 18:17:48 -0500 (EST)
(envelope-from jimc(a)zach1.tiac.net)
Received: from zach1.tiac.net (zach1.tiac.net [206.119.129.250])
by mail-out-1.tiac.net (8.8.7/8.8.7) with ESMTP id SAA22465;
Sun, 20 Dec 1998 18:17:46 -0500 (EST)
Received: (from jimc@localhost)
by zach1.tiac.net (8.8.7/8.8.7) id SAA19857;
Sun, 20 Dec 1998 18:17:44 -0500
From: "James E. Carpenter" <jimc(a)zach1.tiac.net>
Message-Id: <199812202317.SAA19857(a)zach1.tiac.net>
Subject: Re: Ancient SunOS 1.1 tapes --- how to restore?
To: rdkeys(a)seedlab1.cropsci.ncsu.edu (User Rdkeys Robert D. Keys)
Date: Sun, 20 Dec 1998 18:17:43 -0500 (EST)
Cc: pups(a)minnie.cs.adfa.oz.au
In-Reply-To: <199812161520.KAA28340(a)seedlab1.cropsci.ncsu.edu> from "User
Rdkeys Robert D. Keys" at Dec 16, 98 10:20:18 am
Content-Type: text
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
I just took a
quick look at my SunOS 3.2 tapes. The copyright file says:
Copyright (c) 1986 by Sun Microsystems, Inc.
Most of the files seem to be dated September 1986. Many others are dated
July 1986.
Speaking of old SunOS tapes..... I have a friend that dug out a pair
of SunOS 1.1 tapes that he has had for years. Alas, they are unreadable.
Is there any way to rewrite those tapes from anyones archival materials?
Sun has graciously allowed pre-sparc materials to be available on-line
in the German Sun3 archives. All they have seems to be SunOS-4.1.1,
though. I am wondering if there is any interest in some of the
early
Sun tapes?
Well I'd sure love to see SunOS 1.x running on my 2/120. :-)
Are the 1.1 tapes basically a 4.2BSD port? Are they
in
QIC-11 or QIC-24 format?
It would be 4-track QIC-11. SunOS 3.2 also came on four QIC-11 tapes. But
SunOS 4.x _probably_ only came on two QIC-24 tapes. (I say "probably"
because my SunOS 4.x tapes are in 9-track QIC-11 format. I _assume_ this was
done by somebody other than Sun so that it could be installed on a Sun2 with
older ROMs.)
- Jim
--
James E. Carpenter E-Mail: jimc(a)zach1.tiac.net
6 Munroe Drive
Plainville, MA 02762-1108 ICBM: 42 00' 15"N 71 20'
00"W
PGP: 7ADE9D99 Fingerprint: 8D AF 63 EC D3 51 14 3E F1 59 8A 68 32 63 3F 8E
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) id GAA16037
for pups-liszt; Tue, 22 Dec 1998 06:08:18 +1100 (EST)
From Rick Copeland <rickgc(a)calweb.com> Tue Dec 22
05:18:19 1998
Received: from mail.calweb.com (mail.calweb.com [208.131.56.12])
by minnie.cs.adfa.edu.au (8.9.1/8.9.1) with ESMTP id GAA16032
for <pups(a)minnie.cs.adfa.oz.au>au>; Tue, 22 Dec 1998 06:08:09 +1100 (EST)
Received: by mail.calweb.com (8.8.6/8.8.6) with SMTP id LAA04125
for <pups(a)minnie.cs.adfa.oz.au>au>; Mon, 21 Dec 1998 11:08:02 -0800 (PST)
X-SMTP: helo rgc from rickgc(a)calweb.com server @12.22.0.83 ip 12.22.0.83
Message-Id: <3.0.32.19981221111758.00905100(a)pop.calweb.com>
X-Sender: rickgc(a)pop.calweb.com
X-Mailer: Windows Eudora Pro Version 3.0 (32)
Date: Mon, 21 Dec 1998 11:18:19 -0800
To: pups(a)minnie.cs.adfa.oz.au (Unix Heritage Society)
From: Rick Copeland <rickgc(a)calweb.com>
Subject: Problems booting 2.11 on a 11/84
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Dear PUPS List,
I have connected a Fujisu M2444 9 track to an Emulex TC13 that is in my
11/84. The following is what happens when I try to boot a BSD 2.11 tape
that I made on my uVax3600/TU81+ (@6250 bpi):
Enter device name and unit number then press the RETURN key: MS0
Trying MS0 (tape starts rolling)
Starting ROM boot
140276 (tape stops)
@
The boot programs that are available are quite extensive on this 11/84, it
does tapes, disks, just about everything. The M2444 is checked out by
doing the test (01 start, etc)and passes all the tests. If I reverse the
cables on the M2444 the LED on the TC13 comes on and the M2444 will not do
anything.
Rick Copeland