Re: [TUHS] Query on PDP-11 assembly

I have encountered this type of construct a lot when doing disassemblers over the years. My usual strategy for dealing with this is: 1. If it's quick and dirty and I am not running huge amounts of code, then the disassembler allows the user to provide a list of "hints" to it. The hints for this would describe the arguments to each subroutine. For illustrative purposes, you might have a side file that contains the following: subr 002004 questf string meaning that location 002004 is a subroutine names questf that expects a null-terminated string as the argument. As an additional benefit, you get a nice name for the subroutine that the disassembler can put into the output. And if a subroutine takes two 16-bit arguments, you might have: subr 003436 mysub arg16 arg16 If the disassembler identifies each of the targets of the jsr instructions, then you can usually do a quick look at the code to see what it expects, then add to the side file, then re-run the disassembler. 2. If you want to be less quick and dirty, you can have the disassembler do a partial flow analysis of the code to figure out what is expected for arguments. This is usually much more involved and you still often need to add hints for cases where the '60s or '70s programmer did some kind of "neat trick" when coding. My philosophy on these is to use tools to get to the 95%+ level of automation and provide hints to pick up the rest. Using strategy number 1 above will probably get you a lot of success with a small amount of coding in your disassembler. James Markevitch