[TUHS] Init History Ala MERT, CB-UNIX, and USG Generic

So now that I'm done futzing with the 4.1 manual for a while, I've decided to look around a few others to try and get a better feel for the continuity of different features as well as documentation practices between branches. On that note, the more I compare, the more continuity I find between PWB 1.0 and UNIX System III. Between that, various emails here, and some info from Clem, I feel fairly confident calling System III and V as well as the 4.1 in between PWB releases, at least as far as version continuity is concerned, so I may start using that nomenclature more here and there. On the flip side, the name UNIX/TS seems to bear less and less relevance outside of whatever efforts it did originate with in the late 70's. I eventually mean to aggregate all the references I've found together to develop a better picture of what that was, but just know that documentation consistency points to PWB 3, 4, and 5 as the true identity of the USG releases in the 80s, not UNIX/TS as I have referenced previously. So now for an interesting bit of init history I've managed to piece together. The 4.1 manual still indicates the same init system as System III, based on a file called /etc/inittab but with a slightly different format and semantics from what we ultimately see in System V. That init, seen earliest thus far in PWB 3.0, seems to have been developed around that time. I'm struggling to find the email right now but I think someone on the list mentioned having written this one in either '79 or '80. As for the init in System V, it likely entered the PWB line from CB-UNIX based on the CB-UNIX 2.3 manual which can be found here: https://www.tuhs.org/Archive/Distributions/USDL/CB_Unix/cbunix_man5.pdf . I say likely as some recent perusal of the MERT Release 0 manual has now cast some doubt on that. So to start, CB-UNIX 2.3 appears to be somewhat contemporaneous with UNIX 5.0 in that the manual has pages labeled specifically UNIX 5.0. That said, the issue date on the front pages of the manuals is over a year apart, so the 5.0 additions could be just that, added pages after the formal 2.3 issue. Anyway, in common between them is an init system utilizing likewise a file named /etc/inittab, but with a slightly different format and some expanded functionality. The CB-UNIX manpage for this inittab(5) can be found on page 29 of the above document. I had never looked further in that one though, and a couple days ago, I was cataloging all of the pages present in that manual when I came across page 34. This is a page for lines(5) that simply says "No longer used. See inittab(5)." Curious, so perhaps this stream of init once called the file /etc/lines, then renamed it inittab to match PWB? The very next page answers part of that question. Page 35, also lines(5), contains a description of a file very similar to the inittab(5) entry except a line is 5 fields wide, including a "shellcm" field. Unfortunately, the remaining pages of this entry are not in the PDF, presumably this was a mistaken entry. I have another such mistaken entry in a moment. Anywho, what is there of the page indicates the id field actually had an impact on the /dev entry for the terminal line in that it would be named /dev/ln<id>, and goes on to say that if a line monitor other than /etc/getty is used this must be accounted for. So interesting little note there about using something besides getty for line monitoring. Otherwise the page reads pretty similar for what is there, indicating a likely continuity between this /etc/lines-based init and the CB variant of the /etc/inittab system. One interesting note is that /etc/lines supports C-style comments, /etc/inittab instead uses sh conventions. This lines file also indicates there is a run-level 7 which may have become the S run-level. The respawn and wait actions are there, and that's where the page cuts off, so no further evidence here of what was in /etc/lines in 1979 in CB-UNIX 2.1. By 1980 it is replaced with /etc/inittab. So aside from the lines(5) stuff, this has been pretty well understood that System V init came from or at least strongly resembles CB-UNIX init as far as what is available documentation-wise. Well, as I mentioned above, the MERT Release 0 manual may shed some further light on this matter, albeit without fully illuminating it. So first, some MERT context. This document details the origins of MERT Release 0 pretty succinctly: https://www.tuhs.org/Archive/Documentation/Manuals/MERT_Release_0/Pgs%2037-… . Basically MERT 0 is the first "supported" release by the "Small Systems Planning and Development Department (8234)" at Murray Hill. The manual is based on the USG Program Generic Issue 3 version of the manual which was issued in early 1977. This manual, in turn, is from October 1977. This intro goes on to indicate that this product will eventually be released instead as "UNIX/RT" to accompany the in-progress "UNIX/TS" which is said here to be based on V7 with additions from USG Generic 3 and PWB. The MERT-specific portion of this manual is technically considered the second edition, presumably in that the first was the material maintained and distributed by Lycklama and Bayer. So in any case, the landscape of the time seems to be that V7 is starting to go around to the various streams, with UNIX/TS in the works to present it with USG/PWB stuff and then UNIX/RT being planned as the MERT-counterpart. This isn't quite my focus here, but does provide some UNIX/TS "stuff" that has been explained to varying degrees already. So where this all relates to the init though is this: https://www.tuhs.org/Archive/Documentation/Manuals/MERT_Release_0/Pgs%2001-… On page 4 of this document is a list of pages that one must replace in a standard USG Program Generic 3 manual to produce a MERT Release 0 manual. In other words, this essentially lists which pages are changed for MERT. Of interest to this discussion is the V File Formats section on page 5. The instructions are to remove a page called "lines" and to add a page called "ttys". If you then go on to read through the manual, in section V, the ttys file suggests an init system akin to the research init system. This is also indicated by replacement of the init page itself with one describing a system closer to that of research than anything else: https://www.tuhs.org/Archive/Documentation/Manuals/MERT_Release_0/Unix%20Pr… . So based on this, it sounds like USG Generic 3 may have had the same /etc/lines init that we see hints of in CB-UNIX. This also then suggests that CB-UNIX 2.3 may have some basis in USG Generic 3 just like MERT. Based on yet another email I'm struggling to find, another user here had offered up some info regarding a USG Generic 2 manual he has from days past. That manual contained an init similar in flavor to the research init as well, indicating that this init system shows up as part of Generic 3. So now for that other misprint that also bears some relevance. In the UNIX 4.1 manual I recently finished restoring, there was an errant gettydefs(4) page which was only the very last few lines of the manpage (basically the SEE ALSO) section. This file is not part of the pages one needs to discard to create a MERT manual and is not otherwise in the manual, so does not appear to be a part of Generic 3. However, this file does show up in CB-UNIX 2.3, and from there presumably gets sucked into System V, but the misprint suggests such a manpage existed somewhere that would've accidentally wound up in a UNIX 4.1 typesetting run. In any case, it is very well possible this init system may have started popping up in the PWB line before 5.0, but I can't confirm this. In any case, to consolidate this information, here's a bit of a timeline for the init as I see it: 1975 May - V6 issued. Begins getting adopted as the standard base for various streams 1976 January - USG Generic 2 issued. From what has been discussed, this still has a research-style init based on /etc/rc and /etc/ttys 1977 March - USG Generic 3 issued. This allegedly features the addition of the /etc/lines-based init that eventually becomes System V init 1977 May - PWB 1.0 issued. Forks the documentation style quite a bit, starts trends that continue to System III and beyond, still research-style init 1977 October - MERT 0 issued. This uses Generic 3 as a base but reverts to a research-style init system 1979 January - V7 issued. Still using /etc/rc and /etc/ttys 1979 November - CB-UNIX 2.1 issued. This appears to be using a Generic 3-style /etc/lines init 1980 June - PWB 3.0 issued. This has the first known appearance of /etc/inittab but with a different implementation from USG Generic 3 1981 May - CB-UNIX 2.3 issued. By this point, /etc/lines has morphed into /etc/inittab and /etc/gettydefs has been added 1981 June - PWB 4.1 issued. The manual still features the PWB 3.0-style init but an errant page suggests at least possibly /etc/gettydefs support 1982 June - PWB 5.0 issued. The transformation is complete, PWB now uses Generic 3-descended init with CB-UNIX gettydefs This all makes me wonder what PWB 2.0 and UNIX/TS (if it ever coalesced) would've used. Precedent would say PWB 2.0 would use research-style init and UNIX/TS would've likely used Generic 3 if the aim was continuity with the USG Generics, but who knows. Anywho, hope that info's helpful to anyone else researching init systems. Of course if you have info that contradicts or enhances any of this I'd love to hear it! - Matt G.