3 Feb
2002
3 Feb
'02
9:21 p.m.
I've managed to boot the latest 4.3-Quasijarus0a on Bob Supnik's SIMH
VAX emulator. SIMH emulates a MicroVAX 3000, which is one of the
currently supported configurations in 4.3-Quasijarus.
The way I did it was:
First I installed NetBSD 1.5.2/vax on the VAX emulator. I used this to
label and newfs the root/usr diskimage for 4.3-Q (it is important to use
the -O option to newfs so that NetBSD will create a 4.3-style
filesystem. (In all cases, I used RA90 disk images, which are nice and
spacious and which both netbsd and 4.3-Q seem to work well with.) Then
I restored the root and usr filesystems from the 4.3-Q distribution onto
these diskimages, and used the /usr/mdec/installboot command in NetBSD
to install the bootblock onto the root diskimage. I created an fstab
for it, and also commented out everything in rc* having to do with the
network (there's no network device support in SIMH VAX yet). I also
commented out all gettys listed in /etc/ttys except for console.
Speaking of console, it's important to use something which is as close
to a VT-100 as possible. I've been using rxvt, which is pretty good.
It seems to be important to disable the RL controller ("set rl disabled"
in SIMH) when booting the GENERIC kernel. Otherwise, you get a page
fault and panic on boot. (I haven't tracked the cause of this down
yet). The GENERIC kernel also expects there to be images on ra0, ra1
and ra2 (which are rq0, rq1 and rq1 in SIMH, respectively).
I can get the system to come up in multiuser mode, and I can log in as
root. Unfortunately, though, after a few seconds, the system locks up
with
uda0: lost interrupt
uba0: reset uda0
uda0: DMA burst size set to 4
ra0: uda0, unit 0, size = 2376153 sectors
Typing ^E to get to the SIMH prompt, and single-stepping the emulator
shows it is stuck in the idle loop. At this point, nothing short of
shutting down SIMH has any effect.
Any thoughts on what might be going wrong? The complete log is included
below:
--Mirian
KA655-B V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Tests completed.
>>boot dua0:
(BOOT/R5:0 DUA0)
2..
-DUA0
1..0..
loading boot
Boot
: /vmunix
327204+103384+130352 start 0x23a8
4.3 BSD Quasijarus UNIX #0: Sat Oct 2 22:15:38 CDT 1999
msokolov@luthien:/usr/src/sys/GENERIC
real mem = 67076096
SYSPTSIZE limits number of buffers to 18
avail mem = 65240064
using 18 buffers containing 147456 bytes of memory
MicroVAX 3000, ucode rev 6
uda0 at uba0 csr 172150 vec 774, ipl 15
uda0: version 3 model 3
uda0: DMA burst size set to 4
ra0 at uda0 slave 0: mydisk, size = 2376153 sectors
ra1 at uda0 slave 1: no disk label: ra90, size = 2376153 sectors
ra2 at uda0 slave 2: no disk label: ra90, size = 2376153 sectors
ra3 at uda0 slave 3: floppy
dz0 at uba0 csr 160100 didn't interrupt
dz1 at uba0 csr 160110 didn't interrupt
dz2 at uba0 csr 160120 didn't interrupt
dz3 at uba0 csr 160130 didn't interrupt
Changing root device to ra0a
WARNING: todr too small -- CHECK AND RESET THE DATE!
Automatic reboot in progress...
Sun Aug 19 18:07:26 CDT 2001
/dev/ra0a: 429 files, 5504 used, 26548 free (52 frags, 3312 blocks, 0.0% fragmentation)
/dev/rra0d: 2588 files, 21064 used, 968769 free (785 frags, 120998 blocks, 0..0%
fragmentation)
Sun Aug 19 18:07:58 CDT 2001
checking quotas: done.
starting system logger
preserving editor files
clearing /tmp
standard daemons: update cron.
starting local daemons:.
Sun Aug 19 18:08:01 CDT 2001
4.3 BSD UNIX (kryluk) (console)
login: root
Last login: Sun Aug 19 17:52:53 on console
4.3 BSD Quasijarus UNIX #0: Sat Oct 2 22:15:38 CDT 1999
Welcome to UNIX!
erase ^?, kill ^U, intr ^C
# uda0: lost interrupt
uba0: reset uda0
uda0: DMA burst size set to 4
ra0: uda0, unit 0, size = 2376153 sectors