16 Dec
1999
16 Dec
'99
9:42 a.m.
The "old" firmware will do fine up until the
end of 28-Feb-2000, when it
will promptly wrap back around to 1990. You can use 2.11BSD 'toyset'
(or the RSX-11 or RT-11 equivalent) to set the TOY clock after that date,
but at power on it'll reset back to 1990.
No prob.. If I get a SLIP link up and running I'll just suck down the right
date from an NTP server on my net which is synchronized to a radio clock.
Heck, I could just hook up a clock receiver to the machine directly!
I hardly ever bother to set hardware clocks in my machines anymore. The
batteries in my VAX for the clock and stuff ran out quite a while ago, but
no problem either..
See the discussions in vmsnet.pdp-11 earlier this year
for the ordering
code and cost (I think it's around $25.00) for the new 11/93 and 11/94
firmware.
Any idea about version numbers I could check? This machine was used until
pretty recently in a production environment and maintained pretty
well on the hardware/firmware level. I don't think it was decomissioned
because of Y2K, but because they were told that they could provide a 'better'
service with a Micro$oft solution.
Last thing I heard is that the new solution is sorta falling apart all over
the place.. Not surprising to me, but they're not getting this machine back! :-)
Bye, Arno.
--
PSINetworks Europe Fax: +31-23-5699841 | One disk to rule them all,
Siriusdreef 34 Tel: +31-23-5699840 | One disk to bind them,
2132WT Hoofddorp+--------------------------------+ One disk to hold the files
The Netherlands | * Musical Interlude * | And in the darkness grind 'em
----------------+--------------------------------+------------------------------
We say Retribution, We say Vengeance is bliss, We say Revolution,
With a Cast-Iron fist! (Megadeth, 'The Disintegrators')
--------------------------------------------------------------------------------