28 Nov
2002
28 Nov
'02
2:19 a.m.
Hello from Gregg C Levine
I've been trying to get that notion to work, since it was announced.
Can you post an explanation, regarding how you constructed your 2.11
setup? Was it built from disk dumps, or from one of the previously
built, and stored collections, on the Minnie, file server? Also, a
posting of the startup script would be nice, along with what you are
running this on. That way, we can possibly reproduce your problems for
ourselves. Especially since this is one of my personal projects. And
most importantly of all, what was the date on your simh download?
-------------------
Gregg C Levine hansolofalcon(a)worldnet.att.net
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke." Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan Kenobi )
(This company dedicates this E-Mail to Master Yoda )
-----Original Message-----
From: pups-admin(a)minnie.tuhs.org [mailto:pups-admin@minnie.tuhs.org]
On
Behalf Of Andru Luvisi
Sent: Wednesday, November 27, 2002 8:20 PM
To: pups(a)minnie.tuhs.org
Subject: [pups] 2.11BSD networking on simh
I have gotten 2.11 installed on simh, I have it recognizing the
simulated
ethernet card, and everything appears correct except
the packets just
aren't getting in and out. The simh documentation says that the DELQA
card is better than the DEQNA, but I was unable to get the DELQA (qt)
driver to recognize the card. When I compiled the kernel to use the
DEQNA
(qe) driver and set the card up in DEQNA mode, the
emulated card and
its
ethernet address were correctly detected.
I have configured 2.11BSD with:
A valid IP address on the network the host is on.
The same netmask, broadcast, and gateway as the host.
I am running the emulator as root.
I have attached the DEQNA to the appropriate ethernet card. I can see
the
ethernet card go into promiscuous mode when I start
the emulator.
I have tested it with SANITY=ON and SANITY=OFF.
The docs say you won't be able to talk between the host and the
emulated
machine, so my test for each configuration has been
pinging the
gateway,
which I know responds to pings since I can ping it
from the host.
I have been over both the 2.11BSD docs and the simh docs several times
and
as far as I can tell I am doing everything correctly.
I would
appreciate
any hints that any of you can offer.
Thanks,
Andru
Quote Of The Moment:
Appel's method avoids making a large number of small trampoline
bounces
by occasionally jumping off the Empire State
Building.
-- Henry G. Baker, "Cheney on the M.T.A."
_______________________________________________
PUPS mailing list
PUPS(a)minnie.tuhs.org
http://minnie.tuhs.org/mailman/listinfo/pups