David O'Brien <obrien(a)NUXI.com> wrote:
> The port-vax(a)netbsd.org list is full of very VAX clueful people.
So is quasijarus(a)ivan.Harhan.ORG.
--
Michael Sokolov Harhan Engineering Laboratory
Public Service Agent International Free Computing Task Force
International Engineering and Science Task Force
615 N GOOD LATIMER EXPY STE #4
DALLAS TX 75204-5852 USA
Phone: +1-214-824-7693 (Harhan Eng Lab office)
E-mail: msokolov(a)ivan.Harhan.ORG (ARPA TCP/SMTP) (UUCP coming soon)
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id GAA48519
for pups-liszt; Sat, 27 May 2000 06:52:57 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
In article by Mike W.:
> I have a digital microvax II in a 'world case'. I was wondering how to
> hook it up and make it fly. I was told that it runs the Micro VMS OS,
> but no to get get it on the machine, Model: one of two: VS12W-B2 or
> V512W-B2. It is an old sticker, could be a 5 or an S. A tape drive is
> installed, but no tape disk came with it. Is there another OS it can
> run?
Yes, it will run UNIX, the timesharing system by Ritchie and Thompson, Berkeley
VAX version thereof, the current version of which is 4.3BSD-Quasijarus
maintained by me, the WWW page for which is:
http://minnie.cs.adfa.edu.au/
Running UNIX requires a UNIX source license (True UNIX never had, doesn't have,
and never will have a concept of "binary only"), but these days SCO gives them
out for FREE! You have a tape drive, so you will have no problem with
installation. I have supply you with the boot tape, but you'll have to
reimburse me for the tape and shipping.
> How do I hook up the Console to work on it. For that matter, what does
> the console look like?
You need a standard RS-232 terminal. The console port connector on the MicroVAX
is of a rather odd standard, though. A DEC BCC05 or BCC08 cable will connect it
to a standard RS-232 DB25M terminal. If you want or have to make your own
cable, I've got the pinout for the MicroVAX console port connector somewhere.
> [...] nothing on 'where and
> how the cables go on the back (bulkhead).
The I/O distribution panel on the back provides external connections for all
Q-bus modules you have. You'll have to tell us what Q-bus modules you have so
that we can tell you what external connections they need. You obviously have
the CPU, which has one external connection: the console port which I just told
you about.
> I need to know how, why and
> when to turn the knobs on the back.
On the CPU module bulkhead there are two knobs and one switch. One knob selects
the console port baud rate. I think this one is obvious. You can use any of the
baud rates printed around the knob, but 9600 baud is standard. The other knob
selects between normal operation (the arrow icon), console language selection
(the talking face icon), and console port loopback test (the T in the circle
icon). I always leave it on the arrow icon. Finally, the switch selects between
maintenance mode (halt enabled, stay in the console on power-up) and production
mode (halt disabled, boot the OS on power-up). These correspond to the dot-
inside-the-circle and dot-outside-the-circle icons, respectively. For now leave
the dot inside the circle.
For more info subscribe to the Quasijarus mailing list and ask there. Send
subscription requests to:
quasijarus-request(a)ivan.Harhan.ORG
--
Michael Sokolov Harhan Engineering Laboratory
Public Service Agent International Free Computing Task Force
International Engineering and Science Task Force
615 N GOOD LATIMER EXPY STE #4
DALLAS TX 75204-5852 USA
Phone: +1-214-824-7693 (Harhan Eng Lab office)
E-mail: msokolov(a)ivan.Harhan.ORG (ARPA TCP/SMTP) (UUCP coming soon)
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id GAA48495
for pups-liszt; Sat, 27 May 2000 06:46:12 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
On 25 May, David O'Brien wrote:
> On Fri, May 26, 2000 at 08:33:51AM +1000, Warren Toomey wrote:
>> In article by Mike W.:
>> > I have a digital microvax II in a 'world case'. I was wondering how to
>> > hook it up and make it fly. I was told that it runs the Micro VMS OS,
>
> The port-vax(a)netbsd.org list is full of very VAX clueful people.
Yes. port-vax is the right audience. (I am part of it. ;-) )
There is an excellent site with information about VAX hardware.
http://www.vaxarchive.org/hw/index.html
mirror at
http://vaxarchive.sevensages.org/hw/index.html
There you can find a link to the KA630/MicroVAX II page
http://www.telnet.hu/hamster/dr/ka630.html
This will answer most of your questions.
If you want a modern Unix OS look at www.netbsd.org.
Or look at http://minnie.cs.adfa.edu.au/Quasijarus/ (Hi Michael :-) )
--
tschüß,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id TAA43336
for pups-liszt; Fri, 26 May 2000 19:19:50 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From "Joerg B. Micheel" <joerg(a)begemot.org> Fri May 26 19:22:21 2000
Received: from begemot.org (negara.cs.waikato.ac.nz [130.217.248.112])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id TAA43332
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 19:19:44 +1000 (EST)
(envelope-from joerg(a)begemot.org)
Received: (from joerg@localhost)
by begemot.org (8.9.3/8.9.2) id VAA04812;
Fri, 26 May 2000 21:22:21 +1200 (NZST)
(envelope-from joerg)
Date: Fri, 26 May 2000 21:22:21 +1200
From: "Joerg B. Micheel" <joerg(a)begemot.org>
To: pups(a)minnie.cs.adfa.edu.au
Cc: joerg(a)begemot.org
Subject: Begemot emulator and Harti
Message-ID: <20000526212221.A4801(a)begemot.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Organization: Begemot Computer Associates
Operating-System: ... powered by FreeBSD
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Just as a side note: if you think Harti's Emulator is a useful
piece of software: sent him flowers. He's celebrating wedding
this morning in Berlin, marrying a friendly young lady from
Sibiria, Russia, her name is Larissa.
Regards,
Joerg
--
Joerg B. Micheel Email: <joerg(a)begemot.org>
Begemot Computer Associates Phone: +64 7 8562148
40 Masters Avenue, Hillcrest Fax: +64 7 8562148
Hamilton, New Zealand Pager: +64 868 38222
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id AAA44458
for pups-liszt; Sat, 27 May 2000 00:07:05 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From "Jason T. Miller" <jasomill(a)shaffstall.com> Sat May 27 00:04:37 2000
Received: from guildenstern.shaffstall.com (cisdn-2.on-net.net [206.229.84.2])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id AAA44454
for <pups(a)minnie.cs.adfa.edu.au>; Sat, 27 May 2000 00:07:00 +1000 (EST)
(envelope-from jasomill(a)shaffstall.com)
Received: from localhost (jasomill@localhost)
by guildenstern.shaffstall.com (8.9.3/8.9.3) with ESMTP id JAA31910;
Fri, 26 May 2000 09:04:37 -0500
X-Authentication-Warning: guildenstern.shaffstall.com: jasomill owned process doing -bs
Date: Fri, 26 May 2000 09:04:37 -0500 (EST)
From: "Jason T. Miller" <jasomill(a)shaffstall.com>
To: "Steven M. Schultz" <sms(a)moe.2bsd.com>
cc: pups(a)minnie.cs.adfa.edu.au
Subject: Re: Hello and thanks!
In-Reply-To: <200005260320.UAA27315(a)moe.2bsd.com>
Message-ID: <Pine.LNX.4.10.10005260850030.31892-100000(a)guildenstern.shaffstall.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Well, I keep calling the hardware support folks, and it keeps ringing
busy. Of course, since I don't have call waiting or voice mail, that is to
be expected :) I've actually thought about trying to acquire an
MSCP<->SCSI card and using one of the SCSI drives I have lying around, but
the 19" rackmount stuff is too cool (unfortunately, my spares cabinet is
full of dirty laundry and ruined CD-R media at the moment), though I
suppose an RA92 would suffice (anybody got one? :) though my budget is
henceforth nonexistant -- $300 wouldn't break the bank, because they
wouldn't give it to me. Don't know about the RQDX3, either, but more
likely the KDA50 (which drives my RA81 -- the RQDX3 is for RXen, no more).
The '81 was up all last night, so I don't have error numbers yet; I'll try
to repeat the RX50 problem sometime this weekend. The only FS, I have, is
yours, though I've started reading through it. Though the SCSI spec is
thousands of pages long, it's pretty easy to program; I just finished some
raw-tape-read routines for Hewlett-Packard CS/80 tape drives, that was
even simpler. In both cases, however, I do have documentation
(exhaustive documentation in re: SCSI -- again, work related). I take it
from your reply that such docs aren't to be had for MSCP? At any price?
Jason T. Miller
jasomill(a)shaffstall.com
On Thu, 25 May 2000, Steven M. Schultz wrote:
> Hi -
>
> > From: "Jason T. Miller" <jasomill(a)shaffstall.com>
> > After about a week of work (mainly due to a dying RA81 ... see below), I
> > have successfully installed 2.11BSD on my 11/83. First and foremost,
> > thanks to a) Steven M. Shultz for so carefully maintaining and updating
> > (!) CSRG's PDP-11 code to work with hardware such as my MSCP drives and
> > TMSCP TK50 and b) everyone involved in prodding SCO to release free
>
> You're welcome! I can't take all of the credit (or blame depending
> how you look at it) for the MSCP driver - that came about in 2.10
> just before I became heavily involved. Changes/rewrites/whatever
> are my fault though ;) The TMSCP driver for 2BSD is my doing (based
> on a *heavily* mauled version of the 4.3BSD one with some Ultrix
> influences).
>
> > The only problems I've been having seem to be coming from disk controllers
> > without media. More specifically, I get a hard error, followed by an
> > endless loop of error indications if I try to access one of my RX50s (on
> > an RQDX3 controller), and the only recourse is a reset. Okay, so the
>
> Hmmm, that's a new one to me. I used to have RX50s but they were
> so d$&$*&^!d flakey that I put a standard "pc" 5.25" floppy on
> instead (TEAC something or other). I didn't do the hardware stuff,
> Terry Kennedy did that. Details on jumper setting to use a 5.25"
> floppy in place of RX50s are floating around somewhere on the net
> but I don't have the reference handy.
>
> Can't say I've had a problem with the floppy drive with no media.
> It spins and eventually spits out an error but nothing bad happens
> to the system.
>
> Hmmmm, what rev level of 2.11BSD do you have installed? The latest
> from the PUPS archive (or at least fairly recent)?
>
> > solution here is simple: don't do it. The bigger problem comes with my
> > flake-job of an RA81, which, FWIW, is the only fixed disk storage I have.
> > It has a strange habit: the "A" light goes off and the controller can no
>
> Been there, seen that - on 11/44s with UDA50 controllers. When that
> happened I picked up the phone and got the hardware support folks to
> get me a new RA81 ;) After a while they got tired of maintaining
> old hardware and when the RA81 died the last time they just turned off
> the system and later sold it for scrap (instead of spending $300 for
> a RA92 drive). Boo hiss.
>
> RA81s have been the worst drive I've seen for failures - it should
> be fairly cheap to get a RA92 (8" desktop enclosure if I recall
> right) to replace the RA81. Does the RQDX3 support the larger
> drives though I wonder?
>
> > the same loop-of-errors syndrome as an empty RX50. Anyone have any
> > pointers or sage advice? I figured I may try to modify the MSCP driver to
> > re-init the controller on a hard error, and try again. But the MSCP code
> > is fairly complicated, and I know nothing of the protocol. Anyone have any
>
> You're not just whistling Dixie there - it's the most complex
> convoluted protocol I've seen for handling disks (and tapes). Well,
> SCSI these days might be just as complex - but there's a difference:
> I can get lots better specs and documentation for SCSI than I can for
> MSCP. If you've access to other systems (RSX, IAS, etc) sources you
> can RTFS (Read The Fine Source) and try to puzzle out how MSCP works
> what the errors are and what to do about them but that's a far
> cry from a complete, detailed, tabular, whatever document on how to
> write a MSCP driver.
>
> > MSCP documentation which I could beg, borrow, or steal? I'd give the
> > specific error codes, but I haven't written any down yet and I'm at work.
>
> I know I did do some work (mostly in the TMSCP part though) to improve
> error handling and not leave drives stranded and the like. If you
> can jot down the error codes I can take a look at the driver and
> perhaps see what can be done to recover more gracefully.
>
> Cheers!
>
> Steven Schultz
> sms(a)moe.2bsd.com
>
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id AAA44573
for pups-liszt; Sat, 27 May 2000 00:41:22 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From Markus Leypold <leypold(a)informatik.uni-tuebingen.de> Sat May 27 00:40:23 2000
Received: from toulon.informatik.uni-tuebingen.de (toulon.Informatik.Uni-Tuebingen.De [134.2.12.9])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id AAA44569
for <pups(a)minnie.cs.adfa.edu.au>; Sat, 27 May 2000 00:41:17 +1000 (EST)
(envelope-from leypold(a)informatik.uni-tuebingen.de)
Received: from informatik.uni-tuebingen.de (wintermute [134.2.12.56])
by toulon.informatik.uni-tuebingen.de (Postfix) with ESMTP id 5DC1E1061
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 16:40:23 +0200 (DFT)
Received: (from leypold@localhost)
by informatik.uni-tuebingen.de (8.9.3/8.9.3) id QAA12383;
Fri, 26 May 2000 16:40:23 +0200 (CEST)
(envelope-from leypold(a)informatik.uni-tuebingen.de)
Date: Fri, 26 May 2000 16:40:23 +0200 (CEST)
Message-Id: <200005261440.QAA12383(a)informatik.uni-tuebingen.de>
X-Authentication-Warning: wintermute.informatik.uni-tuebingen.de: leypold set sender to leypold(a)informatik.uni-tuebingen.de using -f
From: Markus Leypold <leypold(a)informatik.uni-tuebingen.de>
To: pups(a)minnie.cs.adfa.edu.au
Subject: Re: Building a 2.11BSD tape for Supnik's emulator
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hello Seth,
I never worked with a real PDP-11. I tried to build a V7 Boot tape for
the Supnick and still did not succeed, but I got the following impressions:
* V7 Doc says, You can't use the bootstrap from the DEC bulk ROM,
but need to key in a custom bootstrap. Have a look into
the V7 Manual Volume 2B (Essay about Installing UNIX).
* It seems, a tape also needs to contain labels for the files
(512 Byte Records), kind of directory.
Regards -- Markus
Original Message:
---------------------------------
Hello folks,
I'm trying to build a 2.11BSD boot tape for Bob Supnik's emulator. I
downloaded the tape files from Distributions/ucb/2.11BSD, and put them
together with the following commands (on Linux):
cat mtboot mtboot boot | dd of=file0 obs=512
dd if=disklabel of=file1 obs=1024
dd if=mkfs of=file2 obs=1024
dd if=restor of=file3 obs=1024
dd if=icheck of=file4 obs=1024
dd if=root.dump of=file5 obs=10240
dd if=file6.tar of=file6 obs=10240
dd if=file7.tar of=file7 obs=10240
dd if=file8.tar of=file8 obs=10240
cat file? > boot.tape [I've verified the shell expands this
expression to the correct file order]
But when I run the simulator and try to boot from the tape (with or
without the -o optiont to 'boot'), it fails, like so:
% pdp11
PDP-11 simulator V2.3d
sim> set cpu 18b
sim> set cpu 2048K
sim> att tm0 boot.tape
sim> boot tm0
HALT instruction, PC: 000002 (HALT)
sim> boot -o tm0
HALT instruction, PC: 000002 (HALT)
sim>
It's like the bootstrap code isn't working. Or possibly I've completely
misunderstood the proper way to build a tape image. Is there a better
way to go about it?
- -Seth
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id CAA45296
for pups-liszt; Sat, 27 May 2000 02:31:58 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From "Steven M. Schultz" <sms(a)moe.2bsd.com> Sat May 27 02:26:28 2000
Received: from moe.2bsd.com (0(a)MOE.2BSD.COM [206.139.202.200])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id CAA45292
for <pups(a)minnie.cs.adfa.edu.au>; Sat, 27 May 2000 02:31:49 +1000 (EST)
(envelope-from sms(a)moe.2bsd.com)
Received: (from sms@localhost)
by moe.2bsd.com (8.9.3/8.9.3) id JAA08996
for pups(a)minnie.cs.adfa.edu.au; Fri, 26 May 2000 09:26:28 -0700 (PDT)
Date: Fri, 26 May 2000 09:26:28 -0700 (PDT)
From: "Steven M. Schultz" <sms(a)moe.2bsd.com>
Message-Id: <200005261626.JAA08996(a)moe.2bsd.com>
To: pups(a)minnie.cs.adfa.edu.au
Subject: Re: Building a 2.11BSD tape for Supnik's emulator
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hi -
> From: Markus Leypold <leypold(a)informatik.uni-tuebingen.de>
> I never worked with a real PDP-11. I tried to build a V7 Boot tape for
> the Supnick and still did not succeed, but I got the following impressions:
>
> * It seems, a tape also needs to contain labels for the files
> (512 Byte Records), kind of directory.
Not exactly. The boot tape consists of files with different block
sizes but has no "labels".
> Original Message:
> ---------------------------------
> I'm trying to build a 2.11BSD boot tape for Bob Supnik's emulator. I
> downloaded the tape files from Distributions/ucb/2.11BSD, and put them
> together with the following commands (on Linux):
>
> cat mtboot mtboot boot | dd of=file0 obs=512
> dd if=disklabel of=file1 obs=1024
> dd if=mkfs of=file2 obs=1024
> dd if=restor of=file3 obs=1024
> dd if=icheck of=file4 obs=1024
> dd if=root.dump of=file5 obs=10240
> dd if=file6.tar of=file6 obs=10240
> dd if=file7.tar of=file7 obs=10240
> dd if=file8.tar of=file8 obs=10240
> cat file? > boot.tape [I've verified the shell expands this
> expression to the correct file order]
So close yet so far.
You do not need to "reblock" the files - they already have the correct
sizes. What you do need to do is run a program to add the record
length information for the emulator. The emulator needs to have
"virtual" file and record mark information added.
If you look in the "usr/src/sys/pdpstand" directory you will find
a source file "makesimtape.c". This is a slightly modified version
of the 'maketape' program which 2.11 uses to create its own boot tapes.
The modifications consist of changes to add the virtual tape marks
for Bob's emulator.
I will include a copy of makesimtape.c below in case anyone has trouble
finding it in the source tree.
makesimtape should compile on almost anything (I've used it on
2.11BSD, BSD/OS, and I think FreeBSD). Compile that program. Then
create a small file (maketape.data) containing:
mtboot 1
mtboot 1
boot 1
* 1
disklabel 2
* 1
mkfs 2
* 1
restor 2
* 1
icheck 2
* 1
root.dump 20
* 1
file6.tar 20
* 1
file7.tar 20
* 1
file8.tar 20
*1
Then "makesimtape -i maketape.data -o your_tape_file" will create
the virtual tape file in 'your_tape_file'.
Actually to make sure things work (and the tape is bootable and can
run the standalone programs) all you need are the files up thru
root.dump - that is enough to load the root filesystem.
With a real tape drive you use the "maketape" program that comes
with 2.11 of course since it wants to issue ioctl calls to place
real tape marks, etc on a tape.
> It's like the bootstrap code isn't working. Or possibly I've completely
> misunderstood the proper way to build a tape image. Is there a better
> way to go about it?
Hopefully the method described above will be closer to what's
needed. it has been quite a while since I've actually created a
simulated tape so I might have left out a step or something.
Good Luck!
Steven Schultz
sms(a)moe.2bsd.com
=====================makesimtape.c=========================
/*
* @(#)makesimtape.c 2.1 (2.11BSD) 1998/12/31
* Hacked 'maketape.c' to write a file in a format suitable for
* use with Bob Supnik's PDP-11 simulator (V2.3) emulated tape
* driver.
*
* NOTE: a PDP-11 has to flip the shorts within the long when writing out
* the record size. Seems a PDP-11 is neither a little-endian
* machine nor a big-endian one.
*/
#include <stdio.h>
#include <errno.h>
#include <fcntl.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/uio.h>
#define MAXB 30
char buf[MAXB * 512];
char name[50];
long recsz, flipped, trl();
int blksz;
int mt, fd, cnt;
struct iovec iovec[3];
struct iovec tmark[2];
void usage();
main(argc, argv)
int argc;
char *argv[];
{
int i, j = 0, k = 0;
long zero = 0;
register char *outfile = NULL, *infile = NULL;
FILE *mf;
struct stat st;
while ((i = getopt(argc, argv, "i:o:")) != EOF)
{
switch (i)
{
case 'o':
outfile = optarg;
break;
case 'i':
infile = optarg;
break;
default:
usage();
/* NOTREACHED */
}
}
if (!outfile || !infile)
usage();
/* NOTREACHED */
/*
* Stat the outfile and make sure it either 1) Does not exist, or
* 2) Exists but is a regular file.
*/
if (stat(outfile, &st) != -1 && !(S_ISREG(st.st_mode)))
errx(1, "outfile must either not exist or be a regular file");
/* NOTREACHED */
mt = open(outfile, O_WRONLY|O_CREAT|O_TRUNC, 0600);
if (mt < 0)
err(1, "Can not create %s", outfile);
/* NOTREACHED */
mf = fopen(infile, "r");
if (!mf)
err(1, "Can not open %s", infile);
/* NOTREACHED*/
tmark[0].iov_len = sizeof (long);
tmark[0].iov_base = (char *)&zero;
while (1)
{
if ((i = fscanf(mf, "%s %d", name, &blksz))== EOF)
exit(0);
if (i != 2) {
fprintf(stderr,"Help! Scanf didn't read 2 things (%d)\n", i);
exit(1);
}
if (blksz <= 0 || blksz > MAXB)
{
fprintf(stderr, "Block size %u is invalid\n", blksz);
exit(1);
}
recsz = blksz * 512; /* convert to bytes */
iovec[0].iov_len = sizeof (recsz);
#ifdef pdp11
iovec[0].iov_base = (char *)&flipped;
#else
iovec[0].iov_base = (char *)&recsz;
#endif
iovec[1].iov_len = (int)recsz;
iovec[1].iov_base = buf;
iovec[2].iov_len = iovec[0].iov_len;
iovec[2].iov_base = iovec[0].iov_base;
if (strcmp(name, "*") == 0)
{
if (writev(mt, tmark, 1) < 0)
warn(1, "writev of pseudo tapemark failed");
k++;
continue;
}
fd = open(name, 0);
if (fd < 0)
err(1, "Can't open %s for reading", name);
/* NOTREACHED */
printf("%s: block %d, file %d\n", name, j, k);
/*
* we pad the last record with nulls
* (instead of the bell std. of padding with trash).
* this allows you to access text files on the
* tape without garbage at the end of the file.
* (note that there is no record length associated
* with tape files)
*/
while ((cnt=read(fd, buf, (int)recsz)) == (int)recsz)
{
j++;
#ifdef pdp11
flipped = trl(recsz);
#endif
if (writev(mt, iovec, 3) < 0)
err(1, "writev #1");
/* NOTREACHED */
}
if (cnt > 0)
{
j++;
bzero(buf + cnt, (int)recsz - cnt);
#ifdef pdp11
flipped = trl(recsz);
#endif
if (writev(mt, iovec, 3) < 0)
err(1, "writev #2");
/* NOTREACHED */
}
close(fd);
}
/*
* Write two tape marks to simulate EOT
*/
writev(mt, tmark, 1);
writev(mt, tmark, 1);
}
long
trl(l)
long l;
{
union {
long l;
short s[2];
} foo;
register short x;
foo.l = l;
x = foo.s[0];
foo.s[0] = foo.s[1];
foo.s[1] = x;
return(foo.l);
}
void
usage()
{
fprintf(stderr, "usage: makesimtape -o outfilefile -i inputfile\n");
exit(1);
}
After about a week of work (mainly due to a dying RA81 ... see below), I
have successfully installed 2.11BSD on my 11/83. First and foremost,
thanks to a) Steven M. Shultz for so carefully maintaining and updating
(!) CSRG's PDP-11 code to work with hardware such as my MSCP drives and
TMSCP TK50 and b) everyone involved in prodding SCO to release free
Ancient UNIX source licenses.
After dealing with a crippled binary-only Micro/RSX lack-of-a-kit, and as
a FreeBSD user of five-odd years, I decided to bite the bullet and see
what UNIX was/is like on a PDP. Thanks to the work of Steven and a cast of
thousands, it's pretty damned impressive.
The only problems I've been having seem to be coming from disk controllers
without media. More specifically, I get a hard error, followed by an
endless loop of error indications if I try to access one of my RX50s (on
an RQDX3 controller), and the only recourse is a reset. Okay, so the
solution here is simple: don't do it. The bigger problem comes with my
flake-job of an RA81, which, FWIW, is the only fixed disk storage I have.
It has a strange habit: the "A" light goes off and the controller can no
longer access it. If I soft-restart the PDP (under either RSX or UNIX),
the driver connects back to the drive without a glitch. And this gives me
the same loop-of-errors syndrome as an empty RX50. Anyone have any
pointers or sage advice? I figured I may try to modify the MSCP driver to
re-init the controller on a hard error, and try again. But the MSCP code
is fairly complicated, and I know nothing of the protocol. Anyone have any
MSCP documentation which I could beg, borrow, or steal? I'd give the
specific error codes, but I haven't written any down yet and I'm at work.
Also, I am willing to provide a Good Home for any 19" rackmount MSCP
drives in the midwest. Let me rephrase that: any one or two; I have a one
bedroom apartment, and I'm saving a bit of floorspace for a (yet to
materialize) VAX. Also Qbus thinnet or SCSI would be nice, whilst on cloud
780...
TIA,
jasomill
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id IAA39885
for pups-liszt; Fri, 26 May 2000 08:30:23 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From "Jason T. Miller" <jasomill(a)shaffstall.com> Fri May 26 08:28:09 2000
Received: from guildenstern.shaffstall.com (cisdn-2.on-net.net [206.229.84.2])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id IAA39881
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 08:30:17 +1000 (EST)
(envelope-from jasomill(a)shaffstall.com)
Received: from localhost (jasomill@localhost)
by guildenstern.shaffstall.com (8.9.3/8.9.3) with ESMTP id RAA21354
for <pups(a)minnie.cs.adfa.edu.au>; Thu, 25 May 2000 17:28:10 -0500
X-Authentication-Warning: guildenstern.shaffstall.com: jasomill owned process doing -bs
Date: Thu, 25 May 2000 17:28:09 -0500 (EST)
From: "Jason T. Miller" <jasomill(a)shaffstall.com>
To: pups(a)minnie.cs.adfa.edu.au
Subject: to change without notice
Message-ID: <Pine.LNX.4.10.10005251726530.20729-100000(a)guildenstern.shaffstall.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
After reading the _entire_ archive of PUPS messages, and realizing that,
no, I'm not crazy and, no, I'm not the only one still interested in old
hardware and software, I dug up two old 16-bit UNIX distributions and
promptly archived 'em. Unfortunately, they're binary only and System-V
based, so I can't just throw 'em in the archive. But when the game is up
on the System-V codebase, I hope these CD-Rs are still around. They are:
- SCO XENIX 286 2.2, complete OS with development system and text
processing ([tn]roff, etc)
- Microport System V/AT Development System (runtimes say both 1.3
and 2.3, development stuff says 1.3 - don't know, never booted this one)
All the floppies read without errors, and I've actually booted and run the
XENIX (used it for a tape conversion job a couple years ago) - works as
long as you have a 5.25" floppy drive and reasonably old hardware - I ran
it on a 386 but it doesn't grok VGA.
Also, I have the ability to write TK50 tapes along with a wide range of
other formats (my employer makes tape conversion equipment and software);
no TK25 (unless the old IBM Tandberg VarBlock format is identical - don't
know) or TK70, but just about anything else (need PDP UNIX on an HP 9144A
cartridge tape; a) why? and b) I can help*!). I'd be happy to cut PDP UNIX
tapes for media and shipping.
Finally, anyone ever used the mtools package to read MS-DOS disks from an
RX50 from a DEC Rainbow? I'm working on it (no Rainbow, but I've got a box
that writes Rainbow disks) and I'd be glad to help anyone interested; I'm
also working on R/W RX50 on FreeBSD.
Jason T. Miller
jasomill(a)shaffstall.com
* but not much, unless someone is willing to replace the rubber roller
thingy on my HP drive, but, as usual, I digress.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id IAA39928
for pups-liszt; Fri, 26 May 2000 08:34:47 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From Warren Toomey <wkt(a)cs.adfa.edu.au> Fri May 26 08:33:51 2000
Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au [131.236.21.158])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id IAA39924
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 08:34:45 +1000 (EST)
(envelope-from wkt(a)henry.cs.adfa.edu.au)
Received: (from wkt@localhost)
by henry.cs.adfa.edu.au (8.9.2/8.9.3) id IAA07703;
Fri, 26 May 2000 08:33:51 +1000 (EST)
(envelope-from wkt)
From: Warren Toomey <wkt(a)cs.adfa.edu.au>
Message-Id: <200005252233.IAA07703(a)henry.cs.adfa.edu.au>
Subject: Re: Dead MicroVAX II :(
In-Reply-To: <392CE14B.597E81B8(a)willapabay.org> from "Mike W." at "May 25, 2000 1:16:11 am"
To: tscowboy(a)willapabay.org (Mike W.)
Date: Fri, 26 May 2000 08:33:51 +1000 (EST)
Cc: pups(a)minnie.cs.adfa.edu.au (Unix Heritage Society)
Reply-To: wkt(a)cs.adfa.edu.au
X-Mailer: ELM [version 2.4ME+ PL43 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
In article by Mike W.:
> I have a digital microvax II in a 'world case'. I was wondering how to
> hook it up and make it fly. I was told that it runs the Micro VMS OS,
> but no to get get it on the machine, Model: one of two: VS12W-B2 or
> V512W-B2. It is an old sticker, could be a 5 or an S. A tape drive is
> installed, but no tape disk came with it. Is there another OS it can
> run? I wish I knew what to do. I turn it on and it reads something like
> 8, 7, 6, 5, 8, B, C, 3 and then after a VERY long pause, it reads E for
> another long period, then 6 for another long wait and then E forever.
> How do I hook up the Console to work on it. For that matter, what does
> the console look like? How do I go to console mode? Is there some kind
> of manual on it? I have about 8 or 9 monitors and the same amount of
> keyboards and most of the cables. I would like to bring it back to life
> and put it in a show room or something. I have no money, the whole thing
> was given to me. The drives
> were wiped clean (it was at the Hospital, they upgraded). I take it the
> E on the readout tells me, "There is no OS installed". After a month or
> so of searching the internet, I have found a few 'commands' and how to
> wire one cable, a picture and QBUS routing, but nothing on 'where and
> how the cables go on the back (bulkhead). I need to know how, why and
> when to turn the knobs on the back.
> Yes, I know nothing of this thing and would like to learn. I know the
> MAC a little, MS-DOS in my sleep. Anyway.....
>
> Mike Williams
> 4212 S. Pacific Way
> Seaview, Wa. 98644-0068
> tscowboy(a)willapabay.org
I'll cc this to the Pups mailing list. You should subscribe so that you can
get any answers! Details at: http://minnie.cs.adfa.edu.au/PUPS/maillist.html
Ciao,
Warren
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id KAA40418
for pups-liszt; Fri, 26 May 2000 10:13:29 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From Warren Toomey <wkt(a)cs.adfa.edu.au> Fri May 26 10:12:40 2000
Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au [131.236.21.158])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id KAA40414
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 10:13:26 +1000 (EST)
(envelope-from wkt(a)henry.cs.adfa.edu.au)
Received: (from wkt@localhost)
by henry.cs.adfa.edu.au (8.9.2/8.9.3) id KAA08415
for pups(a)minnie.cs.adfa.edu.au; Fri, 26 May 2000 10:12:40 +1000 (EST)
(envelope-from wkt)
From: Warren Toomey <wkt(a)cs.adfa.edu.au>
Message-Id: <200005260012.KAA08415(a)henry.cs.adfa.edu.au>
Subject: Who uploaded these to the PUPS ARchive?
To: pups(a)minnie.cs.adfa.edu.au (Unix Heritage Society)
Date: Fri, 26 May 2000 10:12:40 +1000 (EST)
Reply-To: wkt(a)cs.adfa.edu.au
X-Mailer: ELM [version 2.4ME+ PL43 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hi all,
I'm just doing some house cleaning on the PUPS Archive. I've
forgotten who uploaded these into the incoming directory?
-rw-r----- 1 wkt pupsarc 53634 Feb 24 1999 29pro_inclsys.tar.gz
-rw-r----- 1 wkt pupsarc 777081 Feb 24 1999 29pro_sys.tar.gz
-rw-r--r-- 1 pups pupsarc 5332873 Jan 17 01:48 old-ultrix-32.tar.gz
-rw-r--r-- 1 pups pupsarc 371111664 Mar 20 06:00 old-ultrix.tar.gz
As well, can you supply a README saying what is in these files, too :-)
My memory isn't what it used to me.
Thanks!
Warren
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id OAA41586
for pups-liszt; Fri, 26 May 2000 14:35:06 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From Warren Toomey <wkt(a)cs.adfa.edu.au> Fri May 26 14:34:18 2000
Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au [131.236.21.158])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id OAA41582
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 14:35:03 +1000 (EST)
(envelope-from wkt(a)henry.cs.adfa.edu.au)
Received: (from wkt@localhost)
by henry.cs.adfa.edu.au (8.9.2/8.9.3) id OAA09658
for pups(a)minnie.cs.adfa.edu.au; Fri, 26 May 2000 14:34:19 +1000 (EST)
(envelope-from wkt)
From: Warren Toomey <wkt(a)cs.adfa.edu.au>
Message-Id: <200005260434.OAA09658(a)henry.cs.adfa.edu.au>
Subject: More PUPS Donations & Volunteers
To: pups(a)minnie.cs.adfa.edu.au (Unix Heritage Society)
Date: Fri, 26 May 2000 14:34:18 +1000 (EST)
Reply-To: wkt(a)cs.adfa.edu.au
X-Mailer: ELM [version 2.4ME+ PL43 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hi all,
Since the free SCO license, we've had an enormous demand on our
PUPS volunteers. If there is anybody in Japan who can burn CDs, could you
contact me if you are prepared to burn a few copies of the PUPS CD.
I've made a start on tidying up the archive & moving recently donated
things to appropriate directories. Are there other systems out there
which could be donated to the archive? I've just have a Z8000 SystemIII
system being donated.
I'm happy to take donations, but they may not be moved into the main
archive because I don't want to have my butt sued off.
Ages ago, George Colouris at QMC in the UK had a 9-track tape containing
QED, the visual Unix editor which influenced the development of vi. Can
anybody in the UK read 9-tracks. If so, I'll put you in contact with George.
Cheers,
Warren
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id OAA41696
for pups-liszt; Fri, 26 May 2000 14:51:59 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From "David O'Brien" <obrien(a)NUXI.com> Fri May 26 14:44:17 2000
Received: from relay.nuxi.com (root(a)nuxi.cs.ucdavis.edu [169.237.7.38])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id OAA41692
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 14:51:55 +1000 (EST)
(envelope-from obrien(a)NUXI.com)
Received: from dragon.nuxi.com (nobody(a)relay.nuxi.com [169.237.7.38])
by relay.nuxi.com (8.9.3/8.9.3) with ESMTP id VAA06137;
Thu, 25 May 2000 21:51:04 -0700 (PDT)
(envelope-from obrien(a)dragon.nuxi.com)
Received: (from obrien@localhost)
by dragon.nuxi.com (8.9.3/8.9.1) id VAA42078;
Thu, 25 May 2000 21:44:18 -0700 (PDT)
(envelope-from obrien)
Date: Thu, 25 May 2000 21:44:17 -0700
From: "David O'Brien" <obrien(a)NUXI.com>
To: "Mike W." <tscowboy(a)willapabay.org>
Cc: Unix Heritage Society <pups(a)minnie.cs.adfa.edu.au>
Subject: Re: Dead MicroVAX II :(
Message-ID: <20000525214417.A58091(a)dragon.nuxi.com>
Reply-To: obrien(a)NUXI.com
References: <392CE14B.597E81B8(a)willapabay.org> <200005252233.IAA07703(a)henry.cs.adfa.edu.au>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <200005252233.IAA07703(a)henry.cs.adfa.edu.au>; from wkt(a)cs.adfa.edu.au on Fri, May 26, 2000 at 08:33:51AM +1000
X-Operating-System: FreeBSD 5.0-CURRENT
Organization: The NUXI BSD group
X-PGP-Fingerprint: B7 4D 3E E9 11 39 5F A3 90 76 5D 69 58 D9 98 7A
X-Pgp-Keyid: 34F9F9D5
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
On Fri, May 26, 2000 at 08:33:51AM +1000, Warren Toomey wrote:
> In article by Mike W.:
> > I have a digital microvax II in a 'world case'. I was wondering how to
> > hook it up and make it fly. I was told that it runs the Micro VMS OS,
The port-vax(a)netbsd.org list is full of very VAX clueful people.
--
-- David (obrien(a)NUXI.com)
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id QAA42383
for pups-liszt; Fri, 26 May 2000 16:00:58 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From lars brinkhoff <lars(a)nocrew.org> Fri May 26 15:59:56 2000
Received: from junk.nocrew.org (mail(a)[212.73.17.42])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id QAA42379
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 16:00:53 +1000 (EST)
(envelope-from lars(a)junk.nocrew.org)
Received: from lars by junk.nocrew.org with local (Exim 3.03 #1 (Debian))
id 12vDA4-00039I-00; Fri, 26 May 2000 07:59:56 +0200
To: Johnny Billquist <bqt(a)Update.UU.SE>
Cc: pups(a)minnie.cs.adfa.edu.au
Subject: Re: PDP-11 MMU docs?
References: <Pine.VUL.3.93.1000525173018.7767F-100000(a)Zeke.Update.UU.SE>
From: lars brinkhoff <lars(a)nocrew.org>
Date: 26 May 2000 07:59:56 +0200
In-Reply-To: Johnny Billquist's message of "Thu, 25 May 2000 17:30:37 +0200 (MET DST)"
Message-ID: <85em6pvokj.fsf(a)junk.nocrew.org>
User-Agent: Gnus/5.0803 (Gnus v5.8.3) Emacs/20.5
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Johnny Billquist <bqt(a)Update.UU.SE> writes:
> On 25 May 2000, lars brinkhoff wrote:
> > Is there any PDP-11 MMU documentation available?
> Don't remember seeing any. What do you want to know?
Everything necessary to emulate one in software. I have Supnik's
simulator, but it would be easier if I had proper docs.
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id QAA42466
for pups-liszt; Fri, 26 May 2000 16:20:11 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From "Steven M. Schultz" <sms(a)moe.2bsd.com> Fri May 26 16:18:57 2000
Received: from moe.2bsd.com (0(a)MOE.2BSD.COM [206.139.202.200])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id QAA42459
for <pups(a)minnie.cs.adfa.edu.au>; Fri, 26 May 2000 16:20:00 +1000 (EST)
(envelope-from sms(a)moe.2bsd.com)
Received: (from sms@localhost)
by moe.2bsd.com (8.9.3/8.9.3) id XAA29942
for pups(a)minnie.cs.adfa.edu.au; Thu, 25 May 2000 23:18:57 -0700 (PDT)
Date: Thu, 25 May 2000 23:18:57 -0700 (PDT)
From: "Steven M. Schultz" <sms(a)moe.2bsd.com>
Message-Id: <200005260618.XAA29942(a)moe.2bsd.com>
To: pups(a)minnie.cs.adfa.edu.au
Subject: Re: PDP-11 MMU docs?
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
Hi -
> From: lars brinkhoff <lars(a)nocrew.org>
> Johnny Billquist <bqt(a)Update.UU.SE> writes:
> > On 25 May 2000, lars brinkhoff wrote:
> > > Is there any PDP-11 MMU documentation available?
> > Don't remember seeing any. What do you want to know?
>
> Everything necessary to emulate one in software. I have Supnik's
> simulator, but it would be easier if I had proper docs.
Do you also have Harti Brandt's P11 ("Begemot") emulator? That
is a _work of art_! Has an emulated DEQNA so you can place the
"PDP-11" on a LAN, the timeskew problem has been fixed (the emulated
pdp-11 keeps good time), and it also has a TOY clock now.
Check out http://www.begemot.org
Steven Schultz
sms(a)moe.2bsd.com
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id SAA43074
for pups-liszt; Fri, 26 May 2000 18:55:33 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
Warren Toomey <wkt(a)cs.adfa.edu.au> wrote:
> I'd recommend you look into the Quasijarus project at
> http://minnie.cs.adfa.edu.au/Quasijarus/
>
> and join their mailing list by sending a request to Michael Sokolov:
> msokolov(a)ivan.Harhan.ORG
Thanks, Warren, for helping me out with awareness-raising! I have to disappoint
Jeff a little bit, though, that 4.3BSD-Quasijarus support for BabyVAXen is
still a while away, but trust me, we will get there some day! But my project
pages and mailing list are definitely a tremendous resource.
--
Michael Sokolov Harhan Engineering Laboratory
Public Service Agent International Free Computing Task Force
International Engineering and Science Task Force
615 N GOOD LATIMER EXPY STE #4
DALLAS TX 75204-5852 USA
Phone: +1-214-824-7693 (Harhan Eng Lab office)
E-mail: msokolov(a)ivan.Harhan.ORG (ARPA TCP/SMTP) (UUCP coming soon)
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id SAA36284
for pups-liszt; Thu, 25 May 2000 18:45:11 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
Jeff Johnson <jeff+pups(a)websitefactory.net> wrote:
> I've got a VAXstation 2000 with 12MB of RAM, and two RD54 drives,
> one of which is developing bad sectors (the secondary). I've got the
> eight bitplane graphics card and no terminal available.
Two RD54s? At least one of them must be external then, as there's only room for
one full-height device in the VS2K box itself. I'm going to assume that you
have the standard DEC configuration with one RD54 internal and an expansion
adapter (pizza box) at the bottom with the 2nd external RD54 connected to it.
Hey, except for the lack of TK50Z, you've got pretty much the maximum
configuration from DEC for VS2K: maximum memory, maximum number of disks of
top-of-the-line type, expansion adapter, and top-of-the-line graphics card!
On your expansion adapter, right next to the connector for the external RD54,
you should see a 50-lead Amphenol (aka Centronics) SCSI connector. It is indeed
real SCSI, but the boot ROM, VMS, and Ultrix only support one SCSI device on
it, the TK50Z.
> I also don't have a TK50 or any external storage,
Note that if you can get hold of a TK50Z (a box just like your external RD54,
but with a TK50 drive and a TK50-to-SCSI adapter inside), you can readily plug
it into the connector I just described. I don't think a TK50Z would be that
expensive. Here in Dallas, TX, USA I get bare TK50 drives for $75 apiece and
TK50 drive + TQK50 controller (for Q-bus) pairs for $100 apiece, and I don't
think a TK50Z would be much more expensive.
> so it looks like I'll be netbooting.
Sorry, can't help you with that, I and netbooting have never been able to
successfully coexist in the same machine room at the same time.
> The machine currently has OpenVMS 7.2 on it which I can re-license and get
> running if it would help for an install.
If you have VMS running on one disk, you can use it to install Ultrix on the
other. Talk to me directly for the instructions.
--
Michael Sokolov Harhan Engineering Laboratory
Public Service Agent International Free Computing Task Force
International Engineering and Science Task Force
615 N GOOD LATIMER EXPY STE #4
DALLAS TX 75204-5852 USA
Phone: +1-214-824-7693 (Harhan Eng Lab office)
E-mail: msokolov(a)ivan.Harhan.ORG (ARPA TCP/SMTP) (UUCP coming soon)
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id NAA97968
for pups-liszt; Thu, 25 May 2000 13:46:08 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
Hey guys. I've got a VAXstation 2000 with 12MB of RAM, and two RD54 drives,
one of which is developing bad sectors (the secondary). I've got the
eight bitplane graphics card and no terminal available. I'd really love to
get a copy of Ultrix 4.2 installed on this machine, but from what I can
tell it isn't available. I also don't have a TK50 or any external storage,
so it looks like I'll be netbooting.
The machine currently has OpenVMS 7.2 on it which I can re-license and get
running if it would help for an install. I've had almost no success with
NetBSD either. The only kernel that would boot was a 1.3 snapshot release.
All of the 1.4 kernels crap out immediately upon booting, and nobodys seems
to be able to help me.
Also, if anyone has a source for additional expansion for this machine, I'd
be grateful. Thanks very much for your time. I really want to get this
machine up and running again.
--
Jeffrey H. Johnson - jeff(a)websitefactory.net - System Administration - TrN
Barnet Worldwide Enterprises - The Website Factory - www.websitefactory.net
Perhaps some of the learned people on this list can help this chappie
out? The ACMS is the Australian Computer Museum Society, and could in
turn be a valuable resource for this list; note that he signs himself
as a "PDP-11 Support Consultant"...
Replies to him, please, unless deemed of interest to the list.
--
Dave Horsfall VK2KFU dave(a)geac.com.au Ph: +61 2 9978-7493 Fx: +61 2 9978-7422
Geac Computers P/L (FGH Division) 2/57 Christie St, St Leonards 2065, Australia
---------- Forwarded message ----------
Date: Sun, 21 May 2000 12:53:26
From: John G E R E M I N <megajohn(a)sneaker.net.au>
To: ACS NSW List <acsnsw-l(a)onelist.com>
Subject: ACMS, Questions on Internet History.
Greetings All, (from a Netscape v3, Eudora and Win-3.11 system),
The ACMS has been asked about the History Of The Internet In Australia.
This assumes that the 'Internet' is defined as using IP protocols,
and the World-Wide-Web that provided permanent (or semi-permanent)
connections between major nodes and the end-users.
We also know that DEC had world-wide DECNET for its corporate use.
We know that U**X systems had FTP, TELNET etc available on systems
using fixed line connections (eg within Unis, etc).
We know about the ArpaNet origins (we hope)
We know? that the first Internet users here were the CSIRO and Unis.
But were they connected initially to the overseas Internet ?
So some questions, designed to sort out some confusions.
First hand experiences would be good as would pointers to documentation.
Note - all these relate to Australia (but answers may include
info relating to overseas contexts).
a1 First use of Fido-Net or other BBS using Dial-up messaging ?
a2 First use of E-MAIL via FidoNet or other BBS ?
a3 First use of FreeWare/File Distribution via FidoNet or other BBS ?
a4 First use of Message/Conference Areas/Groups on BBS ?
b1 First use of permanent IP addresses ?
b2 First use of E-MAIL via IP addresses ?
b3 First use of File Transfers via Internet ?
b4 First use of NewsGroups via Internet ?
b5 First use of Graphical Displays via Internet ?
b6 First use of 'http://www' type URL addressing via Internet ?
b7 First use of two-way (interactive) audio via Internet ?
b8 First use of two-way (intereactive) video via Internet ?
c1 Any other major Internet milestones in the Australian environment ?
Many thanks, John G. (PS you don't need to answer all questions!)
John GEREMIN, megajohn(a)sneaker.net.au Ph. 02-9764 4855
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
PDP-11 Support Consultant, MEGATRONICS, Australia.
http://www.posit.com.au/megatronics/ NEW Mob. => 0427 10 20 60 <=
Hon. Treasurer, Australian COMPUTER MUSEUM Society Inc.
http://www.terrigal.net.au/~acms/ Fax: 02-9764 4679
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id XAA75969
for pups-liszt; Mon, 22 May 2000 23:57:33 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From John G E R E M I N <megajohn(a)sneaker.net.au> Sun May 21 12:53:26 2000
Received: from threedee.com (mail.threedee.com [209.83.65.10])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id XAA75965
for <pups(a)minnie.cs.adfa.edu.au>; Mon, 22 May 2000 23:57:26 +1000 (EST)
(envelope-from jfoust(a)threedee.com)
Received: from winnie.threedee.com (winnie [192.198.5.13]) by threedee.com (8.7.5/8.7.3) with ESMTP id IAA29050; Mon, 22 May 2000 08:56:39 -0500
Message-Id: <4.3.0.20000522085035.01c28580@pc>
X-Sender: jfoust@pc
X-Mailer: QUALCOMM Windows Eudora Version 4.3
Date: Mon, 22 May 2000 08:54:53 -0500
To: <pups(a)minnie.cs.adfa.edu.au>
From: John Foust <jfoust(a)threedee.com>
Subject: Re: ACMS, Questions on Internet History. (fwd)
Cc: John G E R E M I N <megajohn(a)sneaker.net.au>
In-Reply-To: <Pine.GSO.4.21.0005221634220.26282-100000(a)fgh.geac.com.au>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
At 04:39 PM 5/22/00 +1000, Dave Horsfall wrote:
> a1 First use of Fido-Net or other BBS using Dial-up messaging ?
> a2 First use of E-MAIL via FidoNet or other BBS ?
> a3 First use of FreeWare/File Distribution via FidoNet or other BBS ?
Tom Jennings, the creator of FidoNet, is still available at
<tomj(a)wps.com> and there's a history at
http://wps.com/FidoNet/source/Fido-FidoNet/fhist.html.
Tom is now moderating the Dead Media Project at
http://wps.com/dead-media/index.html.
But by no means was FidoNet the first BBS.
- John
----- Forwarded message from Zane H. Healy -----
From: "Zane H. Healy" <healyzh(a)aracnet.com>
While investigating building a Ultrix V3.1 tape I discovered that the file
on the archive is corrupt.
Distributions/dec/Ultrix-3.1/ultrix-3.1-bootape.tar.gz
File 34: The ULTRIX-11 /usr file system in dump/restor format
Zane
----- End of forwarded message from Zane H. Healy -----
Wilko Bulte sent that in to the PUPS Archive. Wilko, do you still have the
tape. Can you try to read it again?!
Cheers,
Warren
Received: (from major@localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id SAA22439
for pups-liszt; Sun, 21 May 2000 18:51:57 +1000 (EST)
(envelope-from owner-pups(a)minnie.cs.adfa.edu.au)
>From Wilko Bulte <wkb(a)chello.nl> Sun May 21 20:50:59 2000
Received: from relay02.chello.nl (relay02.chello.nl [212.83.68.146])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id SAA22432
for <pups(a)minnie.cs.adfa.edu.au>; Sun, 21 May 2000 18:51:51 +1000 (EST)
(envelope-from wkb(a)chello.nl)
Received: from chello.nl ([213.46.78.184]) by relay02.chello.nl
(InterMail vK.4.02.00.00 201-232-116 license 2ee4e7c625482f2f2a1950a80f6c8d58)
with ESMTP id <20000521085044.QFLE24740.relay02(a)chello.nl>;
Sun, 21 May 2000 10:50:44 +0200
Received: (from wkb@localhost)
by chello.nl (8.9.3/8.9.3) id KAA37481;
Sun, 21 May 2000 10:50:59 GMT
(envelope-from wkb)
Date: Sun, 21 May 2000 10:50:59 +0000
From: Wilko Bulte <wkb(a)chello.nl>
To: Warren Toomey <wkt(a)cs.adfa.edu.au>
Cc: Unix Heritage Society <pups(a)minnie.cs.adfa.edu.au>
Subject: Re: Ultrix V3.1 broken
Message-ID: <20000521105059.A21186(a)freebie.wbnet>
Reply-To: wc.bulte(a)chello.nl
References: <200005210610.QAA72885(a)henry.cs.adfa.edu.au>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <200005210610.QAA72885(a)henry.cs.adfa.edu.au>; from wkt(a)cs.adfa.edu.au on Sun, May 21, 2000 at 04:10:21PM +1000
X-OS: FreeBSD 4.0-RELEASE
X-PGP: finger wilko(a)freebsd.org
Sender: owner-pups(a)minnie.cs.adfa.edu.au
Precedence: bulk
On Sun, May 21, 2000 at 04:10:21PM +1000, Warren Toomey wrote:
Warren,
When I untar the .tgz I get files named tapeblock[0-33]
In tapeblock4 is an index of the original tape, which lists the
various files on the tape. These are numbered *1* til *34*
I think this is just an off by one thing, because there is no tapeblock34
at all.
Please check if this is the case. I don't have any PDP operational so I
cannot verify the contents of tapeblock33. But I'm pretty sure this is /usr
W/
> ----- Forwarded message from Zane H. Healy -----
>
> From: "Zane H. Healy" <healyzh(a)aracnet.com>
>
> While investigating building a Ultrix V3.1 tape I discovered that the file
> on the archive is corrupt.
>
> Distributions/dec/Ultrix-3.1/ultrix-3.1-bootape.tar.gz
>
> File 34: The ULTRIX-11 /usr file system in dump/restor format
>
> Zane
> ----- End of forwarded message from Zane H. Healy -----
>
> Wilko Bulte sent that in to the PUPS Archive. Wilko, do you still have the
> tape. Can you try to read it again?!
>
> Cheers,
> Warren
---end quoted text---
--
Wilko Bulte FreeBSD, the power to serve http://www.freebsd.org